From: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Date: Mon, 25 Mar 2013 08:26:08 +0000 (+0000)
Subject: firewire net: Ignore spd and max_payload advertised by ARP.
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=61a7839a19c157d11930fe69697a4c90884bf7c4;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git

firewire net: Ignore spd and max_payload advertised by ARP.

Stefan Richter <stefanr@s5r6.in-berlin.de> says:
| As far as I can tell, it would be best to ignore max_rec and sspd from ARP
| and NDP but keep using the respective information from firewire-core
| instead (handed over by fwnet_probe()).
|
| Why?  As I noted earlier, RFC 2734:1999 and RFC 3146:2001 were apparently
| written with a too simplistic notion of IEEE 1394 bus topology, resulting
| in max_rec and sspd in ARP-1394 and NDP-1394 to be useless, IMO.
|
| Consider a bus like this:
|
|     A ---- B ==== C
|
| A, B, C are all IP-over-1394 capable nodes.  ---- is an S400 cable hop,
| and ==== is an S800 cable hop.
|
| In case of unicasts or multicasts in which node A is involved as
| transmitter or receiver, as well as in case of broadcasts, the speeds
| S100, S200, S400 work and speed S400 is optimal.
|
| In case of anything else, IOW in case of unicasts or multicasts in which
| only nodes B and C are involved, the speeds S100, S200, S400, S800 work
| and speed S800 is optimal.
|
| Clearly, node A should indicate sspd = S400 in its ARP or NDP packets.
| But which sspd should nodes B and C set there?  Maybe they set S400, which
| would work but would waste half of the available bandwidth in the second
| case.  Or maybe they set S800, which is OK in the second case but would
| prohibit any communication with node A if blindly taken for correct.
|
| On the other hand, firewire-core *always* gives us the correct and optimum
| peer-to-peer speed and asynchronous packet payload, no matter how simple
| or complex the bus topology is and no matter in which temporal order nodes
| join the bus and are discovered.

CC: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index 72536e7fe95c..cb8aa865ff88 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -552,8 +552,6 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 		unsigned char *arp_ptr;
 		u64 fifo_addr;
 		u64 peer_guid;
-		unsigned sspd;
-		u16 max_payload;
 		struct fwnet_peer *peer;
 		unsigned long flags;
 
@@ -564,24 +562,10 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 		fifo_addr = (u64)get_unaligned_be16(&arp1394->fifo_hi) << 32
 				| get_unaligned_be32(&arp1394->fifo_lo);
 
-		sspd = arp1394->sspd;
-		/* Sanity check.  OS X 10.3 PPC reportedly sends 131. */
-		if (sspd > SCODE_3200) {
-			dev_notice(&net->dev, "sspd %x out of range\n", sspd);
-			sspd = SCODE_3200;
-		}
-		max_payload = fwnet_max_payload(arp1394->max_rec, sspd);
-
 		spin_lock_irqsave(&dev->lock, flags);
 		peer = fwnet_peer_find_by_guid(dev, peer_guid);
 		if (peer) {
 			peer->fifo = fifo_addr;
-
-			if (peer->speed > sspd)
-				peer->speed = sspd;
-			if (peer->max_payload > max_payload)
-				peer->max_payload = max_payload;
-
 			peer->ip = arp1394->sip;
 		}
 		spin_unlock_irqrestore(&dev->lock, flags);