From: Kevin McKinney Date: Thu, 22 Nov 2012 19:48:30 +0000 (-0500) Subject: Staging: bcm: Properly format and remove comments as needed in Ioctl.h X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=6117c1f32d4a162c4c6a1631189445114c573661;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git Staging: bcm: Properly format and remove comments as needed in Ioctl.h This patch formats all comments and removes them as needed. Signed-off-by: Kevin McKinney Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/bcm/Ioctl.h b/drivers/staging/bcm/Ioctl.h index 8d89c3412ace..7fff8ca266f3 100644 --- a/drivers/staging/bcm/Ioctl.h +++ b/drivers/staging/bcm/Ioctl.h @@ -30,41 +30,25 @@ typedef struct stGPIOInfo typedef struct stUserThreadReq { - //0->Inactivate LED thread. - //1->Activate the LED thread + /* 0->Inactivate LED thread. */ + /* 1->Activate the LED thread */ UINT ThreadState; } __attribute__((packed))USER_THREAD_REQ, *PUSER_THREAD_REQ; -#define LED_THREAD_ACTIVATION_REQ 1 - -////********** ioctl codes ***********//// +#define LED_THREAD_ACTIVATION_REQ 1 #define BCM_IOCTL 'k' -//1.Control code for CONTROL MESSAGES #define IOCTL_SEND_CONTROL_MESSAGE _IOW(BCM_IOCTL, 0x801, int) -//2.Control code to write a particular value to a particular register -#define IOCTL_BCM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x802, int) // -//3. -#define IOCTL_BCM_REGISTER_READ _IOR(BCM_IOCTL, 0x803, int) // -//4.Control code to write x number of bytes to common memory -//starting from address y -#define IOCTL_BCM_COMMON_MEMORY_WRITE _IOW(BCM_IOCTL, 0x804, int)// -//5.Control code to write x number of bytes to common memory -//starting from address y -#define IOCTL_BCM_COMMON_MEMORY_READ _IOR(BCM_IOCTL, 0x805, int)// -//6.Control code for CONTROL MESSAGES -#define IOCTL_GET_CONTROL_MESSAGE _IOR(BCM_IOCTL, 0x806, int)// -//7.Control code for FIRMWARE DOWNLOAD -#define IOCTL_BCM_FIRMWARE_DOWNLOAD _IOW(BCM_IOCTL, 0x807, int)// +#define IOCTL_BCM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x802, int) +#define IOCTL_BCM_REGISTER_READ _IOR(BCM_IOCTL, 0x803, int) +#define IOCTL_BCM_COMMON_MEMORY_WRITE _IOW(BCM_IOCTL, 0x804, int) +#define IOCTL_BCM_COMMON_MEMORY_READ _IOR(BCM_IOCTL, 0x805, int) +#define IOCTL_GET_CONTROL_MESSAGE _IOR(BCM_IOCTL, 0x806, int) +#define IOCTL_BCM_FIRMWARE_DOWNLOAD _IOW(BCM_IOCTL, 0x807, int) #define IOCTL_BCM_SET_SEND_VCID _IOW(BCM_IOCTL, 0x808, int) -//9.Control code for TRANSFER MODE SWITCHING #define IOCTL_BCM_SWITCH_TRANSFER_MODE _IOW(BCM_IOCTL, 0x809, int) -//10.Control code for LINK UP #define IOCTL_LINK_REQ _IOW(BCM_IOCTL, 0x80A, int) -//11.Control code for RSSI Level Request #define IOCTL_RSSI_LEVEL_REQ _IOW(BCM_IOCTL, 0x80B, int) -//12.Control code for IDLE MODE CONTROL #define IOCTL_IDLE_REQ _IOW(BCM_IOCTL, 0x80C, int) -//13.Control code for SS/BS info #define IOCTL_SS_INFO_REQ _IOW(BCM_IOCTL, 0x80D, int) #define IOCTL_GET_STATISTICS_POINTER _IOW(BCM_IOCTL, 0x80E, int) #define IOCTL_CM_REQUEST _IOW(BCM_IOCTL, 0x80F, int) @@ -142,13 +126,9 @@ typedef struct _DEVICE_DRIVER_INFO typedef struct _NVM_READWRITE { void __user *pBuffer; -// Data to be written from|read to. Memory should be allocated by the caller. uint32_t uiOffset; -// offset at which data should be written to or read from. uint32_t uiNumBytes; -// No. of bytes to be written or read. bool bVerify; -// Applicable only for write. If set verification of written data will be done. } NVM_READWRITE, *PNVM_READWRITE; typedef struct bulkwrmbuffer @@ -159,17 +139,9 @@ typedef struct bulkwrmbuffer } BULKWRM_BUFFER, *PBULKWRM_BUFFER; -/***********Structure used for FlashMap2.x *******************************/ - -/* -* These are Sction present inside the Flash. -* There is sectional RD/WR for flash Map 2.x. -* hence these section will be used in read/write API. -*/ - typedef enum _FLASH2X_SECTION_VAL { - NO_SECTION_VAL = 0, //no section is chosen when absolute offset is given for RD/WR + NO_SECTION_VAL = 0, /* no section is chosen when absolute offset is given for RD/WR */ ISO_IMAGE1, ISO_IMAGE2, DSD0, @@ -188,32 +160,29 @@ typedef enum _FLASH2X_SECTION_VAL } FLASH2X_SECTION_VAL; /* -* Structure used for READ/WRITE Flash Map2.x -*/ + * Structure used for READ/WRITE Flash Map2.x + */ typedef struct _FLASH2X_READWRITE { - FLASH2X_SECTION_VAL Section; //which section has to be read/written - B_UINT32 offset; //Offset within Section. - B_UINT32 numOfBytes; //NOB from the offset + FLASH2X_SECTION_VAL Section; /* which section has to be read/written */ + B_UINT32 offset; /* Offset within Section. */ + B_UINT32 numOfBytes; /* NOB from the offset */ B_UINT32 bVerify; - void __user *pDataBuff; //Buffer for reading/writing + void __user *pDataBuff; /* Buffer for reading/writing */ } FLASH2X_READWRITE, *PFLASH2X_READWRITE; + /* -* This structure is used for coping one section to other. -* there are two ways to copy one section to other. -* it NOB =0, complete section will be copied on to other. -* if NOB !=0, only NOB will be copied from the given offset. -*/ + * This structure is used for coping one section to other. + * there are two ways to copy one section to other. + * it NOB =0, complete section will be copied on to other. + * if NOB !=0, only NOB will be copied from the given offset. + */ typedef struct _FLASH2X_COPY_SECTION { - //Src Section from which Data has to be copied to DstSection FLASH2X_SECTION_VAL SrcSection; - //Destination Section from where Data has to be coppied. FLASH2X_SECTION_VAL DstSection; - //Offset within Section. if NOB =0 it will be ignored and data will be coped from offset 0. B_UINT32 offset; - //NOB from the offset. if NOB = 0 complete src section will be copied to Destination section. B_UINT32 numOfBytes; } FLASH2X_COPY_SECTION, *PFLASH2X_COPY_SECTION; @@ -225,15 +194,15 @@ typedef enum _SECTION_TYPE } SECTION_TYPE, *PSECTION_TYPE; /* -* This section provide the complete bitmap of the Flash. -* using this map lib/APP will isssue read/write command. - Fields are defined as : - Bit [0] = section is present //1:present, 0: Not present -* Bit [1] = section is valid //1: valid, 0: not valid -* Bit [2] = Section is R/W //0: RW, 1: RO -* Bit [3] = Section is Active or not 1 means Active, 0->inactive -* Bit [7...3] = Reserved -*/ + * This section provide the complete bitmap of the Flash. + * using this map lib/APP will isssue read/write command. + * Fields are defined as : + * Bit [0] = section is present //1:present, 0: Not present + * Bit [1] = section is valid //1: valid, 0: not valid + * Bit [2] = Section is R/W //0: RW, 1: RO + * Bit [3] = Section is Active or not 1 means Active, 0->inactive + * Bit [7...3] = Reserved + */ typedef struct _FLASH2X_BITMAP { @@ -247,36 +216,35 @@ typedef struct _FLASH2X_BITMAP UCHAR VSA2; UCHAR SCSI; UCHAR CONTROL_SECTION; - //Reserved for future use + /* Reserved for future use */ UCHAR Reserved0; UCHAR Reserved1; UCHAR Reserved2; } FLASH2X_BITMAP, *PFLASH2X_BITMAP; -//for net entry time check typedef struct _ST_TIME_ELAPSED_ { ULONG64 ul64TimeElapsedSinceNetEntry; - UINT32 uiReserved[4]; //By chance if required for future proofing + UINT32 uiReserved[4]; } ST_TIME_ELAPSED, *PST_TIME_ELAPSED; enum { - WIMAX_IDX = 0, /*To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/ - HOST_IDX, /*To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/ + WIMAX_IDX = 0, /* To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */ + HOST_IDX, /* To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */ MAX_IDX }; typedef struct stGPIOMultiInfo { - UINT uiGPIOCommand; /* 1 for set and 0 for get*/ - UINT uiGPIOMask; /* set the correspondig bit to 1 to access GPIO*/ - UINT uiGPIOValue; /* 0 or 1; value to be set when command is 1.*/ + UINT uiGPIOCommand; /* 1 for set and 0 for get */ + UINT uiGPIOMask; /* set the correspondig bit to 1 to access GPIO */ + UINT uiGPIOValue; /* 0 or 1; value to be set when command is 1. */ } __attribute__((packed))GPIO_MULTI_INFO, *PGPIO_MULTI_INFO; typedef struct stGPIOMultiMode { - UINT uiGPIOMode; /* 1 for OUT mode, 0 for IN mode*/ - UINT uiGPIOMask; /* GPIO mask to set mode*/ + UINT uiGPIOMode; /* 1 for OUT mode, 0 for IN mode */ + UINT uiGPIOMask; /* GPIO mask to set mode */ } __attribute__((packed))GPIO_MULTI_MODE, *PGPIO_MULTI_MODE; #endif