From: Arend van Spriel Date: Fri, 25 Feb 2011 15:39:20 +0000 (+0100) Subject: staging: brcm80211: remove checks for ANTSEL related compiler definitions X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=61044c4cef8b0380e8ec4b06eff24884e4c7d9b9;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git staging: brcm80211: remove checks for ANTSEL related compiler definitions The source module antsel is always included in the current driver so any checks for it being compiled in are redundant and have been removed. Reviewed-by: Roland Vossen Reviewed-by: Brett Rudley Signed-off-by: Arend van Spriel Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c b/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c index d438d9a2a3c3..7aaa958a738d 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c +++ b/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c @@ -1178,8 +1178,7 @@ wlc_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb, wlc_send_q(wlc, wlc->active_queue); /* update rate state */ - if (WLANTSEL_ENAB(wlc)) - antselid = wlc_antsel_antsel2id(wlc->asi, mimoantsel); + antselid = wlc_antsel_antsel2id(wlc->asi, mimoantsel); wlc_txfifo_complete(wlc, queue, ampdu->txpkt_weight); } diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c b/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c index 3e453899db31..8c59898a418b 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c +++ b/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c @@ -16,8 +16,6 @@ #include -#ifdef WLANTSEL - #include #include #include @@ -327,5 +325,3 @@ static int wlc_antsel_cfgupd(struct antsel_info *asi, wlc_antselcfg_t *antsel) return 0; } - -#endif /* WLANTSEL */ diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c b/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c index 3eb7a4a659cd..1a49c6e52e41 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c +++ b/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c @@ -2582,39 +2582,39 @@ static void wlc_gpio_init(struct wlc_info *wlc) gc = gm = 0; /* Allocate GPIOs for mimo antenna diversity feature */ - if (WLANTSEL_ENAB(wlc)) { - if (wlc_hw->antsel_type == ANTSEL_2x3) { - /* Enable antenna diversity, use 2x3 mode */ - wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_EN, - MHF3_ANTSEL_EN, WLC_BAND_ALL); - wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_MODE, - MHF3_ANTSEL_MODE, WLC_BAND_ALL); - - /* init superswitch control */ - wlc_phy_antsel_init(wlc_hw->band->pi, false); - - } else if (wlc_hw->antsel_type == ANTSEL_2x4) { - ASSERT((gm & BOARD_GPIO_12) == 0); - gm |= gc |= (BOARD_GPIO_12 | BOARD_GPIO_13); - /* The board itself is powered by these GPIOs (when not sending pattern) - * So set them high - */ - OR_REG(osh, ®s->psm_gpio_oe, - (BOARD_GPIO_12 | BOARD_GPIO_13)); - OR_REG(osh, ®s->psm_gpio_out, - (BOARD_GPIO_12 | BOARD_GPIO_13)); - - /* Enable antenna diversity, use 2x4 mode */ - wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_EN, - MHF3_ANTSEL_EN, WLC_BAND_ALL); - wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_MODE, 0, - WLC_BAND_ALL); - - /* Configure the desired clock to be 4Mhz */ - wlc_bmac_write_shm(wlc_hw, M_ANTSEL_CLKDIV, - ANTSEL_CLKDIV_4MHZ); - } + if (wlc_hw->antsel_type == ANTSEL_2x3) { + /* Enable antenna diversity, use 2x3 mode */ + wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_EN, + MHF3_ANTSEL_EN, WLC_BAND_ALL); + wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_MODE, + MHF3_ANTSEL_MODE, WLC_BAND_ALL); + + /* init superswitch control */ + wlc_phy_antsel_init(wlc_hw->band->pi, false); + + } else if (wlc_hw->antsel_type == ANTSEL_2x4) { + ASSERT((gm & BOARD_GPIO_12) == 0); + gm |= gc |= (BOARD_GPIO_12 | BOARD_GPIO_13); + /* + * The board itself is powered by these GPIOs + * (when not sending pattern) so set them high + */ + OR_REG(osh, ®s->psm_gpio_oe, + (BOARD_GPIO_12 | BOARD_GPIO_13)); + OR_REG(osh, ®s->psm_gpio_out, + (BOARD_GPIO_12 | BOARD_GPIO_13)); + + /* Enable antenna diversity, use 2x4 mode */ + wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_EN, + MHF3_ANTSEL_EN, WLC_BAND_ALL); + wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_MODE, 0, + WLC_BAND_ALL); + + /* Configure the desired clock to be 4Mhz */ + wlc_bmac_write_shm(wlc_hw, M_ANTSEL_CLKDIV, + ANTSEL_CLKDIV_4MHZ); } + /* gpio 9 controls the PA. ucode is responsible for wiggling out and oe */ if (wlc_hw->boardflags & BFL_PACTRL) gm |= gc |= BOARD_GPIO_PACTRL; diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_cfg.h b/drivers/staging/brcm80211/brcmsmac/wlc_cfg.h index 3decb7d1a5e5..85fbd0635310 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_cfg.h +++ b/drivers/staging/brcm80211/brcmsmac/wlc_cfg.h @@ -69,10 +69,6 @@ #define SSLPNCONF SSLPNPHY_DEFAULT #endif -#define BAND2G -#define BAND5G -#define WLANTSEL 1 - /******************************************************************** * Phy/Core Configuration. Defines macros to to check core phy/rev * * compile-time configuration. Defines default core support. * @@ -281,6 +277,4 @@ #define WLBANDINITDATA(_data) _data #define WLBANDINITFN(_fn) _fn -#define WLANTSEL_ENAB(wlc) 1 - #endif /* _wlc_cfg_h_ */ diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_mac80211.c b/drivers/staging/brcm80211/brcmsmac/wlc_mac80211.c index fb88890d0423..628019862f58 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_mac80211.c +++ b/drivers/staging/brcm80211/brcmsmac/wlc_mac80211.c @@ -861,8 +861,7 @@ void wlc_set_chanspec(struct wlc_info *wlc, chanspec_t chanspec) /* init antenna selection */ if (CHSPEC_WLC_BW(old_chanspec) != CHSPEC_WLC_BW(chanspec)) { - if (WLANTSEL_ENAB(wlc)) - wlc_antsel_init(wlc->asi); + wlc_antsel_init(wlc->asi); /* Fix the hardware rateset based on bw. * Mainly add MCS32 for 40Mhz, remove MCS 32 for 20Mhz @@ -1308,8 +1307,7 @@ static void WLBANDINITFN(wlc_bsinit) (struct wlc_info *wlc) wlc_ucode_mac_upd(wlc); /* init antenna selection */ - if (WLANTSEL_ENAB(wlc)) - wlc_antsel_init(wlc->asi); + wlc_antsel_init(wlc->asi); } @@ -2003,15 +2001,13 @@ void *wlc_attach(void *wl, u16 vendor, u16 device, uint unit, bool piomode, /* initialize radio_mpc_disable according to wlc->mpc */ wlc_radio_mpc_upd(wlc); - if (WLANTSEL_ENAB(wlc)) { - if ((wlc->pub->sih->chip) == BCM43235_CHIP_ID) { - if ((getintvar(wlc->pub->vars, "aa2g") == 7) || - (getintvar(wlc->pub->vars, "aa5g") == 7)) { - wlc_bmac_antsel_set(wlc->hw, 1); - } - } else { - wlc_bmac_antsel_set(wlc->hw, wlc->asi->antsel_avail); + if ((wlc->pub->sih->chip) == BCM43235_CHIP_ID) { + if ((getintvar(wlc->pub->vars, "aa2g") == 7) || + (getintvar(wlc->pub->vars, "aa5g") == 7)) { + wlc_bmac_antsel_set(wlc->hw, 1); } + } else { + wlc_bmac_antsel_set(wlc->hw, wlc->asi->antsel_avail); } if (perr) @@ -5753,11 +5749,9 @@ wlc_d11hdrs_mac80211(struct wlc_info *wlc, struct ieee80211_hw *hw, u32 rate_val[2]; bool hwtkmic = false; u16 mimo_ctlchbw = PHY_TXC1_BW_20MHZ; -#ifdef WLANTSEL #define ANTCFG_NONE 0xFF u8 antcfg = ANTCFG_NONE; u8 fbantcfg = ANTCFG_NONE; -#endif uint phyctl1_stf = 0; u16 durid = 0; struct ieee80211_tx_rate *txrate[2]; @@ -5891,8 +5885,7 @@ wlc_d11hdrs_mac80211(struct wlc_info *wlc, struct ieee80211_hw *hw, ASSERT(RSPEC_ACTIVE(rspec[k])); rspec[k] = WLC_RATE_1M; } else { - if (WLANTSEL_ENAB(wlc) && - !is_multicast_ether_addr(h->addr1)) { + if (!is_multicast_ether_addr(h->addr1)) { /* set tx antenna config */ wlc_antsel_antcfg_get(wlc->asi, false, false, 0, 0, &antcfg, &fbantcfg);