From: Paul Gortmaker Date: Thu, 10 May 2012 20:17:00 +0000 (-0400) Subject: atm: remove the coupling to token ring support X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=60eea6cf2964beea6c38d9050bc3823a93db97e0;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git atm: remove the coupling to token ring support The token ring support is going away, so decouple the atm support from it in advance. Signed-off-by: Paul Gortmaker --- diff --git a/include/linux/atmlec.h b/include/linux/atmlec.h index 39c917fd1b96..302791e3ab2b 100644 --- a/include/linux/atmlec.h +++ b/include/linux/atmlec.h @@ -21,13 +21,6 @@ /* Maximum number of LEC interfaces (tweakable) */ #define MAX_LEC_ITF 48 -/* - * From the total of MAX_LEC_ITF, last NUM_TR_DEVS are reserved for Token Ring. - * E.g. if MAX_LEC_ITF = 48 and NUM_TR_DEVS = 8, then lec0-lec39 are for - * Ethernet ELANs and lec40-lec47 are for Token Ring ELANS. - */ -#define NUM_TR_DEVS 8 - typedef enum { l_set_mac_addr, l_del_mac_addr, diff --git a/net/atm/lec.c b/net/atm/lec.c index bb35cb76b3af..a7d172105c99 100644 --- a/net/atm/lec.c +++ b/net/atm/lec.c @@ -26,11 +26,6 @@ #include #include -/* TokenRing if needed */ -#ifdef CONFIG_TR -#include -#endif - /* And atm device */ #include #include @@ -162,50 +157,6 @@ static void lec_handle_bridge(struct sk_buff *skb, struct net_device *dev) } #endif /* defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE) */ -/* - * Modelled after tr_type_trans - * All multicast and ARE or STE frames go to BUS. - * Non source routed frames go by destination address. - * Last hop source routed frames go by destination address. - * Not last hop source routed frames go by _next_ route descriptor. - * Returns pointer to destination MAC address or fills in rdesc - * and returns NULL. - */ -#ifdef CONFIG_TR -static unsigned char *get_tr_dst(unsigned char *packet, unsigned char *rdesc) -{ - struct trh_hdr *trh; - unsigned int riflen, num_rdsc; - - trh = (struct trh_hdr *)packet; - if (trh->daddr[0] & (uint8_t) 0x80) - return bus_mac; /* multicast */ - - if (trh->saddr[0] & TR_RII) { - riflen = (ntohs(trh->rcf) & TR_RCF_LEN_MASK) >> 8; - if ((ntohs(trh->rcf) >> 13) != 0) - return bus_mac; /* ARE or STE */ - } else - return trh->daddr; /* not source routed */ - - if (riflen < 6) - return trh->daddr; /* last hop, source routed */ - - /* riflen is 6 or more, packet has more than one route descriptor */ - num_rdsc = (riflen / 2) - 1; - memset(rdesc, 0, ETH_ALEN); - /* offset 4 comes from LAN destination field in LE control frames */ - if (trh->rcf & htons((uint16_t) TR_RCF_DIR_BIT)) - memcpy(&rdesc[4], &trh->rseg[num_rdsc - 2], sizeof(__be16)); - else { - memcpy(&rdesc[4], &trh->rseg[1], sizeof(__be16)); - rdesc[5] = ((ntohs(trh->rseg[0]) & 0x000f) | (rdesc[5] & 0xf0)); - } - - return NULL; -} -#endif /* CONFIG_TR */ - /* * Open/initialize the netdevice. This is called (in the current kernel) * sometime after booting when the 'ifconfig' program is run. @@ -257,9 +208,6 @@ static netdev_tx_t lec_start_xmit(struct sk_buff *skb, struct lec_arp_table *entry; unsigned char *dst; int min_frame_size; -#ifdef CONFIG_TR - unsigned char rdesc[ETH_ALEN]; /* Token Ring route descriptor */ -#endif int is_rdesc; pr_debug("called\n"); @@ -290,24 +238,10 @@ static netdev_tx_t lec_start_xmit(struct sk_buff *skb, } skb_push(skb, 2); - /* Put le header to place, works for TokenRing too */ + /* Put le header to place */ lec_h = (struct lecdatahdr_8023 *)skb->data; lec_h->le_header = htons(priv->lecid); -#ifdef CONFIG_TR - /* - * Ugly. Use this to realign Token Ring packets for - * e.g. PCA-200E driver. - */ - if (priv->is_trdev) { - skb2 = skb_realloc_headroom(skb, LEC_HEADER_LEN); - kfree_skb(skb); - if (skb2 == NULL) - return NETDEV_TX_OK; - skb = skb2; - } -#endif - #if DUMP_PACKETS >= 2 #define MAX_DUMP_SKB 99 #elif DUMP_PACKETS >= 1 @@ -321,12 +255,7 @@ static netdev_tx_t lec_start_xmit(struct sk_buff *skb, #endif /* DUMP_PACKETS >= 1 */ /* Minimum ethernet-frame size */ -#ifdef CONFIG_TR - if (priv->is_trdev) - min_frame_size = LEC_MINIMUM_8025_SIZE; - else -#endif - min_frame_size = LEC_MINIMUM_8023_SIZE; + min_frame_size = LEC_MINIMUM_8023_SIZE; if (skb->len < min_frame_size) { if ((skb->len + skb_tailroom(skb)) < min_frame_size) { skb2 = skb_copy_expand(skb, 0, @@ -345,15 +274,6 @@ static netdev_tx_t lec_start_xmit(struct sk_buff *skb, /* Send to right vcc */ is_rdesc = 0; dst = lec_h->h_dest; -#ifdef CONFIG_TR - if (priv->is_trdev) { - dst = get_tr_dst(skb->data + 2, rdesc); - if (dst == NULL) { - dst = rdesc; - is_rdesc = 1; - } - } -#endif entry = NULL; vcc = lec_arp_resolve(priv, dst, is_rdesc, &entry); pr_debug("%s:vcc:%p vcc_flags:%lx, entry:%p\n", @@ -710,12 +630,7 @@ static void lec_push(struct atm_vcc *vcc, struct sk_buff *skb) dev_kfree_skb(skb); return; } -#ifdef CONFIG_TR - if (priv->is_trdev) - dst = ((struct lecdatahdr_8025 *)skb->data)->h_dest; - else -#endif - dst = ((struct lecdatahdr_8023 *)skb->data)->h_dest; + dst = ((struct lecdatahdr_8023 *)skb->data)->h_dest; /* * If this is a Data Direct VCC, and the VCC does not match @@ -723,16 +638,7 @@ static void lec_push(struct atm_vcc *vcc, struct sk_buff *skb) */ spin_lock_irqsave(&priv->lec_arp_lock, flags); if (lec_is_data_direct(vcc)) { -#ifdef CONFIG_TR - if (priv->is_trdev) - src = - ((struct lecdatahdr_8025 *)skb->data)-> - h_source; - else -#endif - src = - ((struct lecdatahdr_8023 *)skb->data)-> - h_source; + src = ((struct lecdatahdr_8023 *)skb->data)->h_source; entry = lec_arp_find(priv, src); if (entry && entry->vcc != vcc) { lec_arp_remove(priv, entry); @@ -750,12 +656,7 @@ static void lec_push(struct atm_vcc *vcc, struct sk_buff *skb) if (!hlist_empty(&priv->lec_arp_empty_ones)) lec_arp_check_empties(priv, vcc, skb); skb_pull(skb, 2); /* skip lec_id */ -#ifdef CONFIG_TR - if (priv->is_trdev) - skb->protocol = tr_type_trans(skb, dev); - else -#endif - skb->protocol = eth_type_trans(skb, dev); + skb->protocol = eth_type_trans(skb, dev); dev->stats.rx_packets++; dev->stats.rx_bytes += skb->len; memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data)); @@ -827,27 +728,13 @@ static int lecd_attach(struct atm_vcc *vcc, int arg) i = 0; else i = arg; -#ifdef CONFIG_TR if (arg >= MAX_LEC_ITF) return -EINVAL; -#else /* Reserve the top NUM_TR_DEVS for TR */ - if (arg >= (MAX_LEC_ITF - NUM_TR_DEVS)) - return -EINVAL; -#endif if (!dev_lec[i]) { - int is_trdev, size; - - is_trdev = 0; - if (i >= (MAX_LEC_ITF - NUM_TR_DEVS)) - is_trdev = 1; + int size; size = sizeof(struct lec_priv); -#ifdef CONFIG_TR - if (is_trdev) - dev_lec[i] = alloc_trdev(size); - else -#endif - dev_lec[i] = alloc_etherdev(size); + dev_lec[i] = alloc_etherdev(size); if (!dev_lec[i]) return -ENOMEM; dev_lec[i]->netdev_ops = &lec_netdev_ops; @@ -858,7 +745,6 @@ static int lecd_attach(struct atm_vcc *vcc, int arg) } priv = netdev_priv(dev_lec[i]); - priv->is_trdev = is_trdev; } else { priv = netdev_priv(dev_lec[i]); if (priv->lecd) @@ -2372,15 +2258,7 @@ lec_arp_check_empties(struct lec_priv *priv, struct hlist_node *node, *next; struct lec_arp_table *entry, *tmp; struct lecdatahdr_8023 *hdr = (struct lecdatahdr_8023 *)skb->data; - unsigned char *src; -#ifdef CONFIG_TR - struct lecdatahdr_8025 *tr_hdr = (struct lecdatahdr_8025 *)skb->data; - - if (priv->is_trdev) - src = tr_hdr->h_source; - else -#endif - src = hdr->h_source; + unsigned char *src = hdr->h_source; spin_lock_irqsave(&priv->lec_arp_lock, flags); hlist_for_each_entry_safe(entry, node, next, diff --git a/net/atm/lec.h b/net/atm/lec.h index dfc071966463..c730e57de199 100644 --- a/net/atm/lec.h +++ b/net/atm/lec.h @@ -142,7 +142,6 @@ struct lec_priv { int itfnum; /* e.g. 2 for lec2, 5 for lec5 */ struct lane2_ops *lane2_ops; /* can be NULL for LANE v1 */ int is_proxy; /* bridge between ATM and Ethernet */ - int is_trdev; /* Device type, 0 = Ethernet, 1 = TokenRing */ }; struct lec_vcc_priv {