From: Andrey Utkin Date: Sat, 22 Oct 2016 15:34:36 +0000 (-0200) Subject: [media] media: solo6x10: fix lockup by avoiding delayed register write X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=5fc4b067ec082c3127e0156f800769b7e0dce078;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git [media] media: solo6x10: fix lockup by avoiding delayed register write This fixes a lockup at device probing which happens on some solo6010 hardware samples. This is a regression introduced by commit e1ceb25a1569 ("[media] SOLO6x10: remove unneeded register locking and barriers") The observed lockup happens in solo_set_motion_threshold() called from solo_motion_config(). This extra "flushing" is not fundamentally needed for every write, but apparently the code in driver assumes such behaviour at last in some places. Actual fix was proposed by Hans Verkuil. Fixes: e1ceb25a1569 ("[media] SOLO6x10: remove unneeded register locking and barriers") Cc: stable@vger.kernel.org # 4.3 and up Signed-off-by: Andrey Utkin Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/pci/solo6x10/solo6x10.h b/drivers/media/pci/solo6x10/solo6x10.h index 5bd498735a66..3f8da5e8c430 100644 --- a/drivers/media/pci/solo6x10/solo6x10.h +++ b/drivers/media/pci/solo6x10/solo6x10.h @@ -284,7 +284,10 @@ static inline u32 solo_reg_read(struct solo_dev *solo_dev, int reg) static inline void solo_reg_write(struct solo_dev *solo_dev, int reg, u32 data) { + u16 val; + writel(data, solo_dev->reg_base + reg); + pci_read_config_word(solo_dev->pdev, PCI_STATUS, &val); } static inline void solo_irq_on(struct solo_dev *dev, u32 mask)