From: Michał Mirosław Date: Fri, 22 May 2009 18:33:59 +0000 (+0200) Subject: mmc: Driver for CB710/720 memory card reader (MMC part) X-Git-Tag: MMI-PSA29.97-13-9~27923^2~18 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=5f5bac8272be791b67c7b7b411e7c8c5847e598a;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git mmc: Driver for CB710/720 memory card reader (MMC part) The code is divided in two parts. There is a virtual 'bus' driver that handles PCI device and registers three new devices one per card reader type. The other driver handles SD/MMC part of the reader. Signed-off-by: Michał Mirosław Signed-off-by: Pierre Ossman --- diff --git a/MAINTAINERS b/MAINTAINERS index 90f81283b722..b5cebddd2849 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2105,6 +2105,15 @@ W: http://sourceforge.net/projects/lpfcxxxx S: Supported F: drivers/scsi/lpfc/ +ENE CB710 FLASH CARD READER DRIVER +P: Michał Mirosław +M: mirq-linux@rere.qmqm.pl +L: linux-kernel@vger.kernel.org +S: Maintained +F: drivers/misc/cb710/ +F: drivers/mmc/host/cb710-mmc.* +F: include/linux/cb710.h + EPSON 1355 FRAMEBUFFER DRIVER P: Christopher Hoover M: ch@murgatroid.com diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 6d1ac180f6ee..68ab39d7cb35 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -235,5 +235,6 @@ config ISL29003 source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" +source "drivers/misc/cb710/Kconfig" endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 7871f05dcb9b..36f733cd60e6 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -21,3 +21,4 @@ obj-$(CONFIG_HP_ILO) += hpilo.o obj-$(CONFIG_ISL29003) += isl29003.o obj-$(CONFIG_C2PORT) += c2port/ obj-y += eeprom/ +obj-y += cb710/ diff --git a/drivers/misc/cb710/Kconfig b/drivers/misc/cb710/Kconfig new file mode 100644 index 000000000000..0b55079774c8 --- /dev/null +++ b/drivers/misc/cb710/Kconfig @@ -0,0 +1,21 @@ +config CB710_CORE + tristate "ENE CB710/720 Flash memory card reader support" + depends on PCI + help + This option enables support for PCI ENE CB710/720 Flash memory card + reader found in some laptops (ie. some versions of HP Compaq nx9500). + + You will also have to select some flash card format drivers (MMC/SD, + MemoryStick). + + This driver can also be built as a module. If so, the module + will be called cb710. + +config CB710_DEBUG + bool "Enable driver debugging" + depends on CB710_CORE != n + default n + help + This is an option for use by developers; most people should + say N here. This adds a lot of debugging output to dmesg. + diff --git a/drivers/misc/cb710/Makefile b/drivers/misc/cb710/Makefile new file mode 100644 index 000000000000..62d51acfecaf --- /dev/null +++ b/drivers/misc/cb710/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_CB710_CORE) += cb710.o + +cb710-y := core.o sgbuf2.o +cb710-$(CONFIG_CB710_DEBUG) += debug.o diff --git a/drivers/misc/cb710/core.c b/drivers/misc/cb710/core.c new file mode 100644 index 000000000000..b14eab0f2ba5 --- /dev/null +++ b/drivers/misc/cb710/core.c @@ -0,0 +1,357 @@ +/* + * cb710/core.c + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include + +static DEFINE_IDA(cb710_ida); +static DEFINE_SPINLOCK(cb710_ida_lock); + +void cb710_pci_update_config_reg(struct pci_dev *pdev, + int reg, uint32_t mask, uint32_t xor) +{ + u32 rval; + + pci_read_config_dword(pdev, reg, &rval); + rval = (rval & mask) ^ xor; + pci_write_config_dword(pdev, reg, rval); +} +EXPORT_SYMBOL_GPL(cb710_pci_update_config_reg); + +/* Some magic writes based on Windows driver init code */ +static int __devinit cb710_pci_configure(struct pci_dev *pdev) +{ + unsigned int devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); + struct pci_dev *pdev0 = pci_get_slot(pdev->bus, devfn); + u32 val; + + cb710_pci_update_config_reg(pdev, 0x48, + ~0x000000FF, 0x0000003F); + + pci_read_config_dword(pdev, 0x48, &val); + if (val & 0x80000000) + return 0; + + if (!pdev0) + return -ENODEV; + + if (pdev0->vendor == PCI_VENDOR_ID_ENE + && pdev0->device == PCI_DEVICE_ID_ENE_720) { + cb710_pci_update_config_reg(pdev0, 0x8C, + ~0x00F00000, 0x00100000); + cb710_pci_update_config_reg(pdev0, 0xB0, + ~0x08000000, 0x08000000); + } + + cb710_pci_update_config_reg(pdev0, 0x8C, + ~0x00000F00, 0x00000200); + cb710_pci_update_config_reg(pdev0, 0x90, + ~0x00060000, 0x00040000); + + pci_dev_put(pdev0); + + return 0; +} + +static irqreturn_t cb710_irq_handler(int irq, void *data) +{ + struct cb710_chip *chip = data; + struct cb710_slot *slot = &chip->slot[0]; + irqreturn_t handled = IRQ_NONE; + unsigned nr; + + spin_lock(&chip->irq_lock); /* incl. smp_rmb() */ + + for (nr = chip->slots; nr; ++slot, --nr) { + cb710_irq_handler_t handler_func = slot->irq_handler; + if (handler_func && handler_func(slot)) + handled = IRQ_HANDLED; + } + + spin_unlock(&chip->irq_lock); + + return handled; +} + +static void cb710_release_slot(struct device *dev) +{ +#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS + struct cb710_slot *slot = cb710_pdev_to_slot(to_platform_device(dev)); + struct cb710_chip *chip = cb710_slot_to_chip(slot); + + /* slot struct can be freed now */ + atomic_dec(&chip->slot_refs_count); +#endif +} + +static int __devinit cb710_register_slot(struct cb710_chip *chip, + unsigned slot_mask, unsigned io_offset, const char *name) +{ + int nr = chip->slots; + struct cb710_slot *slot = &chip->slot[nr]; + int err; + + dev_dbg(cb710_chip_dev(chip), + "register: %s.%d; slot %d; mask %d; IO offset: 0x%02X\n", + name, chip->platform_id, nr, slot_mask, io_offset); + + /* slot->irq_handler == NULL here; this needs to be + * seen before platform_device_register() */ + ++chip->slots; + smp_wmb(); + + slot->iobase = chip->iobase + io_offset; + slot->pdev.name = name; + slot->pdev.id = chip->platform_id; + slot->pdev.dev.parent = &chip->pdev->dev; + slot->pdev.dev.release = cb710_release_slot; + + err = platform_device_register(&slot->pdev); + +#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS + atomic_inc(&chip->slot_refs_count); +#endif + + if (err) { + /* device_initialize() called from platform_device_register() + * wants this on error path */ + platform_device_put(&slot->pdev); + + /* slot->irq_handler == NULL here anyway, so no lock needed */ + --chip->slots; + return err; + } + + chip->slot_mask |= slot_mask; + + return 0; +} + +static void cb710_unregister_slot(struct cb710_chip *chip, + unsigned slot_mask) +{ + int nr = chip->slots - 1; + + if (!(chip->slot_mask & slot_mask)) + return; + + platform_device_unregister(&chip->slot[nr].pdev); + + /* complementary to spin_unlock() in cb710_set_irq_handler() */ + smp_rmb(); + BUG_ON(chip->slot[nr].irq_handler != NULL); + + /* slot->irq_handler == NULL here, so no lock needed */ + --chip->slots; + chip->slot_mask &= ~slot_mask; +} + +void cb710_set_irq_handler(struct cb710_slot *slot, + cb710_irq_handler_t handler) +{ + struct cb710_chip *chip = cb710_slot_to_chip(slot); + unsigned long flags; + + spin_lock_irqsave(&chip->irq_lock, flags); + slot->irq_handler = handler; + spin_unlock_irqrestore(&chip->irq_lock, flags); +} +EXPORT_SYMBOL_GPL(cb710_set_irq_handler); + +#ifdef CONFIG_PM + +static int cb710_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct cb710_chip *chip = pci_get_drvdata(pdev); + + free_irq(pdev->irq, chip); + pci_save_state(pdev); + pci_disable_device(pdev); + if (state.event & PM_EVENT_SLEEP) + pci_set_power_state(pdev, PCI_D3cold); + return 0; +} + +static int cb710_resume(struct pci_dev *pdev) +{ + struct cb710_chip *chip = pci_get_drvdata(pdev); + int err; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + err = pcim_enable_device(pdev); + if (err) + return err; + + return devm_request_irq(&pdev->dev, pdev->irq, + cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip); +} + +#endif /* CONFIG_PM */ + +static int __devinit cb710_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct cb710_chip *chip; + unsigned long flags; + u32 val; + int err; + int n = 0; + + err = cb710_pci_configure(pdev); + if (err) + return err; + + /* this is actually magic... */ + pci_read_config_dword(pdev, 0x48, &val); + if (!(val & 0x80000000)) { + pci_write_config_dword(pdev, 0x48, val|0x71000000); + pci_read_config_dword(pdev, 0x48, &val); + } + + dev_dbg(&pdev->dev, "PCI config[0x48] = 0x%08X\n", val); + if (!(val & 0x70000000)) + return -ENODEV; + val = (val >> 28) & 7; + if (val & CB710_SLOT_MMC) + ++n; + if (val & CB710_SLOT_MS) + ++n; + if (val & CB710_SLOT_SM) + ++n; + + chip = devm_kzalloc(&pdev->dev, + sizeof(*chip) + n * sizeof(*chip->slot), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + err = pcim_enable_device(pdev); + if (err) + return err; + + err = pcim_iomap_regions(pdev, 0x0001, KBUILD_MODNAME); + if (err) + return err; + + chip->pdev = pdev; + chip->iobase = pcim_iomap_table(pdev)[0]; + + pci_set_drvdata(pdev, chip); + + err = devm_request_irq(&pdev->dev, pdev->irq, + cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip); + if (err) + return err; + + do { + if (!ida_pre_get(&cb710_ida, GFP_KERNEL)) + return -ENOMEM; + + spin_lock_irqsave(&cb710_ida_lock, flags); + err = ida_get_new(&cb710_ida, &chip->platform_id); + spin_unlock_irqrestore(&cb710_ida_lock, flags); + + if (err && err != -EAGAIN) + return err; + } while (err); + + + dev_info(&pdev->dev, "id %d, IO 0x%p, IRQ %d\n", + chip->platform_id, chip->iobase, pdev->irq); + + if (val & CB710_SLOT_MMC) { /* MMC/SD slot */ + err = cb710_register_slot(chip, + CB710_SLOT_MMC, 0x00, "cb710-mmc"); + if (err) + return err; + } + + if (val & CB710_SLOT_MS) { /* MemoryStick slot */ + err = cb710_register_slot(chip, + CB710_SLOT_MS, 0x40, "cb710-ms"); + if (err) + goto unreg_mmc; + } + + if (val & CB710_SLOT_SM) { /* SmartMedia slot */ + err = cb710_register_slot(chip, + CB710_SLOT_SM, 0x60, "cb710-sm"); + if (err) + goto unreg_ms; + } + + return 0; +unreg_ms: + cb710_unregister_slot(chip, CB710_SLOT_MS); +unreg_mmc: + cb710_unregister_slot(chip, CB710_SLOT_MMC); + +#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS + BUG_ON(atomic_read(&chip->slot_refs_count) != 0); +#endif + return err; +} + +static void __devexit cb710_remove_one(struct pci_dev *pdev) +{ + struct cb710_chip *chip = pci_get_drvdata(pdev); + unsigned long flags; + + cb710_unregister_slot(chip, CB710_SLOT_SM); + cb710_unregister_slot(chip, CB710_SLOT_MS); + cb710_unregister_slot(chip, CB710_SLOT_MMC); +#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS + BUG_ON(atomic_read(&chip->slot_refs_count) != 0); +#endif + + spin_lock_irqsave(&cb710_ida_lock, flags); + ida_remove(&cb710_ida, chip->platform_id); + spin_unlock_irqrestore(&cb710_ida_lock, flags); +} + +static const struct pci_device_id cb710_pci_tbl[] = { + { PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_CB710_FLASH, + PCI_ANY_ID, PCI_ANY_ID, }, + { 0, } +}; + +static struct pci_driver cb710_driver = { + .name = KBUILD_MODNAME, + .id_table = cb710_pci_tbl, + .probe = cb710_probe, + .remove = __devexit_p(cb710_remove_one), +#ifdef CONFIG_PM + .suspend = cb710_suspend, + .resume = cb710_resume, +#endif +}; + +static int __init cb710_init_module(void) +{ + return pci_register_driver(&cb710_driver); +} + +static void __exit cb710_cleanup_module(void) +{ + pci_unregister_driver(&cb710_driver); + ida_destroy(&cb710_ida); +} + +module_init(cb710_init_module); +module_exit(cb710_cleanup_module); + +MODULE_AUTHOR("Michał Mirosław "); +MODULE_DESCRIPTION("ENE CB710 memory card reader driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cb710_pci_tbl); diff --git a/drivers/misc/cb710/debug.c b/drivers/misc/cb710/debug.c new file mode 100644 index 000000000000..9da11bc620af --- /dev/null +++ b/drivers/misc/cb710/debug.c @@ -0,0 +1,119 @@ +/* + * cb710/debug.c + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include + +#define CB710_REG_COUNT 0x80 + +static const u16 allow[CB710_REG_COUNT/16] = { + 0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF, + 0xFFF0, 0xFFFF, 0xFFFF, 0xFFFF, +}; +static const char *const prefix[ARRAY_SIZE(allow)] = { + "MMC", "MMC", "MMC", "MMC", + "MS?", "MS?", "SM?", "SM?" +}; + +static inline int allow_reg_read(unsigned block, unsigned offset, unsigned bits) +{ + unsigned mask = (1 << bits/8) - 1; + offset *= bits/8; + return ((allow[block] >> offset) & mask) == mask; +} + +#define CB710_READ_REGS_TEMPLATE(t) \ +static void cb710_read_regs_##t(void __iomem *iobase, \ + u##t *reg, unsigned select) \ +{ \ + unsigned i, j; \ + \ + for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) { \ + if (!select & (1 << i)) \ + continue; \ + \ + for (j = 0; j < 0x10/(t/8); ++j) { \ + if (!allow_reg_read(i, j, t)) \ + continue; \ + reg[j] = ioread##t(iobase \ + + (i << 4) + (j * (t/8))); \ + } \ + } \ +} + +static const char cb710_regf_8[] = "%02X"; +static const char cb710_regf_16[] = "%04X"; +static const char cb710_regf_32[] = "%08X"; +static const char cb710_xes[] = "xxxxxxxx"; + +#define CB710_DUMP_REGS_TEMPLATE(t) \ +static void cb710_dump_regs_##t(struct device *dev, \ + const u##t *reg, unsigned select) \ +{ \ + const char *const xp = &cb710_xes[8 - t/4]; \ + const char *const format = cb710_regf_##t; \ + \ + char msg[100], *p; \ + unsigned i, j; \ + \ + for (i = 0; i < ARRAY_SIZE(allow); ++i, reg += 16/(t/8)) { \ + if (!(select & (1 << i))) \ + continue; \ + p = msg; \ + for (j = 0; j < 0x10/(t/8); ++j) { \ + *p++ = ' '; \ + if (j == 8/(t/8)) \ + *p++ = ' '; \ + if (allow_reg_read(i, j, t)) \ + p += sprintf(p, format, reg[j]); \ + else \ + p += sprintf(p, "%s", xp); \ + } \ + dev_dbg(dev, "%s 0x%02X %s\n", prefix[i], i << 4, msg); \ + } \ +} + +#define CB710_READ_AND_DUMP_REGS_TEMPLATE(t) \ +static void cb710_read_and_dump_regs_##t(struct cb710_chip *chip, \ + unsigned select) \ +{ \ + u##t regs[CB710_REG_COUNT/sizeof(u##t)]; \ + \ + memset(®s, 0, sizeof(regs)); \ + cb710_read_regs_##t(chip->iobase, regs, select); \ + cb710_dump_regs_##t(cb710_chip_dev(chip), regs, select); \ +} + +#define CB710_REG_ACCESS_TEMPLATES(t) \ + CB710_READ_REGS_TEMPLATE(t) \ + CB710_DUMP_REGS_TEMPLATE(t) \ + CB710_READ_AND_DUMP_REGS_TEMPLATE(t) + +CB710_REG_ACCESS_TEMPLATES(8) +CB710_REG_ACCESS_TEMPLATES(16) +CB710_REG_ACCESS_TEMPLATES(32) + +void cb710_dump_regs(struct cb710_chip *chip, unsigned select) +{ + if (!(select & CB710_DUMP_REGS_MASK)) + select = CB710_DUMP_REGS_ALL; + if (!(select & CB710_DUMP_ACCESS_MASK)) + select |= CB710_DUMP_ACCESS_8; + + if (select & CB710_DUMP_ACCESS_32) + cb710_read_and_dump_regs_32(chip, select); + if (select & CB710_DUMP_ACCESS_16) + cb710_read_and_dump_regs_16(chip, select); + if (select & CB710_DUMP_ACCESS_8) + cb710_read_and_dump_regs_8(chip, select); +} +EXPORT_SYMBOL_GPL(cb710_dump_regs); + diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c new file mode 100644 index 000000000000..d38a7acdb6ec --- /dev/null +++ b/drivers/misc/cb710/sgbuf2.c @@ -0,0 +1,150 @@ +/* + * cb710/sgbuf2.c + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +static bool sg_dwiter_next(struct sg_mapping_iter *miter) +{ + if (sg_miter_next(miter)) { + miter->consumed = 0; + return true; + } else + return false; +} + +static bool sg_dwiter_is_at_end(struct sg_mapping_iter *miter) +{ + return miter->length == miter->consumed && !sg_dwiter_next(miter); +} + +static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter) +{ + size_t len, left = 4; + uint32_t data; + void *addr = &data; + + do { + len = min(miter->length - miter->consumed, left); + memcpy(addr, miter->addr + miter->consumed, len); + miter->consumed += len; + left -= len; + if (!left) + return data; + addr += len; + } while (sg_dwiter_next(miter)); + + memset(addr, 0, left); + return data; +} + +static inline bool needs_unaligned_copy(const void *ptr) +{ +#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS + return false; +#else + return ((ptr - NULL) & 3) != 0; +#endif +} + +static bool sg_dwiter_get_next_block(struct sg_mapping_iter *miter, uint32_t **ptr) +{ + size_t len; + + if (sg_dwiter_is_at_end(miter)) + return true; + + len = miter->length - miter->consumed; + + if (likely(len >= 4 && !needs_unaligned_copy( + miter->addr + miter->consumed))) { + *ptr = miter->addr + miter->consumed; + miter->consumed += 4; + return true; + } + + return false; +} + +/** + * cb710_sg_dwiter_read_next_block() - get next 32-bit word from sg buffer + * @miter: sg mapping iterator used for reading + * + * Description: + * Returns 32-bit word starting at byte pointed to by @miter@ + * handling any alignment issues. Bytes past the buffer's end + * are not accessed (read) but are returned as zeroes. @miter@ + * is advanced by 4 bytes or to the end of buffer whichever is + * closer. + * + * Context: + * Same requirements as in sg_miter_next(). + * + * Returns: + * 32-bit word just read. + */ +uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter) +{ + uint32_t *ptr = NULL; + + if (likely(sg_dwiter_get_next_block(miter, &ptr))) + return ptr ? *ptr : 0; + + return sg_dwiter_read_buffer(miter); +} +EXPORT_SYMBOL_GPL(cb710_sg_dwiter_read_next_block); + +static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data) +{ + size_t len, left = 4; + void *addr = &data; + + do { + len = min(miter->length - miter->consumed, left); + memcpy(miter->addr, addr, len); + miter->consumed += len; + left -= len; + if (!left) + return; + addr += len; + flush_kernel_dcache_page(miter->page); + } while (sg_dwiter_next(miter)); +} + +/** + * cb710_sg_dwiter_write_next_block() - write next 32-bit word to sg buffer + * @miter: sg mapping iterator used for writing + * + * Description: + * Writes 32-bit word starting at byte pointed to by @miter@ + * handling any alignment issues. Bytes which would be written + * past the buffer's end are silently discarded. @miter@ is + * advanced by 4 bytes or to the end of buffer whichever is closer. + * + * Context: + * Same requirements as in sg_miter_next(). + */ +void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data) +{ + uint32_t *ptr = NULL; + + if (likely(sg_dwiter_get_next_block(miter, &ptr))) { + if (ptr) + *ptr = data; + else + return; + } else + sg_dwiter_write_slow(miter, data); + + if (miter->length == miter->consumed) + flush_kernel_dcache_page(miter->page); +} +EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block); + diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index b4cf691f3f64..75337e442da9 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -241,3 +241,16 @@ config MMC_TMIO help This provides support for the SD/MMC cell found in TC6393XB, T7L66XB and also ipaq ASIC3 + +config MMC_CB710 + tristate "ENE CB710 MMC/SD Interface support" + depends on PCI + select CB710_CORE + help + This option enables support for MMC/SD part of ENE CB710/720 Flash + memory card reader found in some laptops (ie. some versions of + HP Compaq nx9500). + + This driver can also be built as a module. If so, the module + will be called cb710-mmc. + diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 970a997620e1..ce9c8b6f0f4b 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -29,4 +29,5 @@ endif obj-$(CONFIG_MMC_S3C) += s3cmci.o obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o +obj-$(CONFIG_MMC_CB710) += cb710-mmc.o diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c new file mode 100644 index 000000000000..bc048aae7207 --- /dev/null +++ b/drivers/mmc/host/cb710-mmc.c @@ -0,0 +1,804 @@ +/* + * cb710/mmc.c + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include "cb710-mmc.h" + +static const u8 cb710_clock_divider_log2[8] = { +/* 1, 2, 4, 8, 16, 32, 128, 512 */ + 0, 1, 2, 3, 4, 5, 7, 9 +}; +#define CB710_MAX_DIVIDER_IDX \ + (ARRAY_SIZE(cb710_clock_divider_log2) - 1) + +static const u8 cb710_src_freq_mhz[16] = { + 33, 10, 20, 25, 30, 35, 40, 45, + 50, 55, 60, 65, 70, 75, 80, 85 +}; + +static void cb710_mmc_set_clock(struct mmc_host *mmc, int hz) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev; + u32 src_freq_idx; + u32 divider_idx; + int src_hz; + + /* this is magic, unverifiable for me, unless I get + * MMC card with cables connected to bus signals */ + pci_read_config_dword(pdev, 0x48, &src_freq_idx); + src_freq_idx = (src_freq_idx >> 16) & 0xF; + src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000; + + for (divider_idx = 0; divider_idx < CB710_MAX_DIVIDER_IDX; ++divider_idx) { + if (hz >= src_hz >> cb710_clock_divider_log2[divider_idx]) + break; + } + + if (src_freq_idx) + divider_idx |= 0x8; + + cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28); + + dev_dbg(cb710_slot_dev(slot), + "clock set to %d Hz, wanted %d Hz; flag = %d\n", + src_hz >> cb710_clock_divider_log2[divider_idx & 7], + hz, (divider_idx & 8) != 0); +} + +static void __cb710_mmc_enable_irq(struct cb710_slot *slot, + unsigned short enable, unsigned short mask) +{ + /* clear global IE + * - it gets set later if any interrupt sources are enabled */ + mask |= CB710_MMC_IE_IRQ_ENABLE; + + /* look like interrupt is fired whenever + * WORD[0x0C] & WORD[0x10] != 0; + * -> bit 15 port 0x0C seems to be global interrupt enable + */ + + enable = (cb710_read_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT) + & ~mask) | enable; + + if (enable) + enable |= CB710_MMC_IE_IRQ_ENABLE; + + cb710_write_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT, enable); +} + +static void cb710_mmc_enable_irq(struct cb710_slot *slot, + unsigned short enable, unsigned short mask) +{ + struct cb710_mmc_reader *reader = mmc_priv(cb710_slot_to_mmc(slot)); + unsigned long flags; + + spin_lock_irqsave(&reader->irq_lock, flags); + /* this is the only thing irq_lock protects */ + __cb710_mmc_enable_irq(slot, enable, mask); + spin_unlock_irqrestore(&reader->irq_lock, flags); +} + +static void cb710_mmc_reset_events(struct cb710_slot *slot) +{ + cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 0xFF); + cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 0xFF); + cb710_write_port_8(slot, CB710_MMC_STATUS2_PORT, 0xFF); +} + +static int cb710_mmc_is_card_inserted(struct cb710_slot *slot) +{ + return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT) + & CB710_MMC_S3_CARD_DETECTED; +} + +static void cb710_mmc_enable_4bit_data(struct cb710_slot *slot, int enable) +{ + dev_dbg(cb710_slot_dev(slot), "configuring %d-data-line%s mode\n", + enable ? 4 : 1, enable ? "s" : ""); + if (enable) + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, + CB710_MMC_C1_4BIT_DATA_BUS, 0); + else + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, + 0, CB710_MMC_C1_4BIT_DATA_BUS); +} + +static int cb710_check_event(struct cb710_slot *slot, u8 what) +{ + u16 status; + + status = cb710_read_port_16(slot, CB710_MMC_STATUS_PORT); + + if (status & CB710_MMC_S0_FIFO_UNDERFLOW) { + /* it is just a guess, so log it */ + dev_dbg(cb710_slot_dev(slot), + "CHECK : ignoring bit 6 in status %04X\n", status); + cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, + CB710_MMC_S0_FIFO_UNDERFLOW); + status &= ~CB710_MMC_S0_FIFO_UNDERFLOW; + } + + if (status & CB710_MMC_STATUS_ERROR_EVENTS) { + dev_dbg(cb710_slot_dev(slot), + "CHECK : returning EIO on status %04X\n", status); + cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, status & 0xFF); + cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, + CB710_MMC_S1_RESET); + return -EIO; + } + + /* 'what' is a bit in MMC_STATUS1 */ + if ((status >> 8) & what) { + cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, what); + return 1; + } + + return 0; +} + +static int cb710_wait_for_event(struct cb710_slot *slot, u8 what) +{ + int err = 0; + unsigned limit = 2000000; /* FIXME: real timeout */ + +#ifdef CONFIG_CB710_DEBUG + u32 e, x; + e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); +#endif + + while (!(err = cb710_check_event(slot, what))) { + if (!--limit) { + cb710_dump_regs(cb710_slot_to_chip(slot), + CB710_DUMP_REGS_MMC); + err = -ETIMEDOUT; + break; + } + udelay(1); + } + +#ifdef CONFIG_CB710_DEBUG + x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); + + limit = 2000000 - limit; + if (limit > 100) + dev_dbg(cb710_slot_dev(slot), + "WAIT10: waited %d loops, what %d, entry val %08X, exit val %08X\n", + limit, what, e, x); +#endif + return err < 0 ? err : 0; +} + + +static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask) +{ + unsigned limit = 500000; /* FIXME: real timeout */ + int err = 0; + +#ifdef CONFIG_CB710_DEBUG + u32 e, x; + e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); +#endif + + while (cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & mask) { + if (!--limit) { + cb710_dump_regs(cb710_slot_to_chip(slot), + CB710_DUMP_REGS_MMC); + err = -ETIMEDOUT; + break; + } + udelay(1); + } + +#ifdef CONFIG_CB710_DEBUG + x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); + + limit = 500000 - limit; + if (limit > 100) + dev_dbg(cb710_slot_dev(slot), + "WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n", + limit, mask, e, x); +#endif + return 0; +} + +static void cb710_mmc_set_transfer_size(struct cb710_slot *slot, + size_t count, size_t blocksize) +{ + cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + cb710_write_port_32(slot, CB710_MMC_TRANSFER_SIZE_PORT, + ((count - 1) << 16)|(blocksize - 1)); + + dev_vdbg(cb710_slot_dev(slot), "set up for %d block%s of %d bytes\n", + count, count == 1 ? "" : "s", blocksize); +} + +static void cb710_mmc_fifo_hack(struct cb710_slot *slot) +{ + /* without this, received data is prepended with 8-bytes of zeroes */ + u32 r1, r2; + int ok = 0; + + r1 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT); + r2 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT); + if (cb710_read_port_8(slot, CB710_MMC_STATUS0_PORT) + & CB710_MMC_S0_FIFO_UNDERFLOW) { + cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, + CB710_MMC_S0_FIFO_UNDERFLOW); + ok = 1; + } + + dev_dbg(cb710_slot_dev(slot), + "FIFO-read-hack: expected STATUS0 bit was %s\n", + ok ? "set." : "NOT SET!"); + dev_dbg(cb710_slot_dev(slot), + "FIFO-read-hack: dwords ignored: %08X %08X - %s\n", + r1, r2, (r1|r2) ? "BAD (NOT ZERO)!" : "ok"); +} + +static int cb710_mmc_receive_pio(struct cb710_slot *slot, + struct sg_mapping_iter *miter, size_t dw_count) +{ + if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & CB710_MMC_S2_FIFO_READY)) { + int err = cb710_wait_for_event(slot, + CB710_MMC_S1_PIO_TRANSFER_DONE); + if (err) + return err; + } + + cb710_sg_dwiter_write_from_io(miter, + slot->iobase + CB710_MMC_DATA_PORT, dw_count); + + return 0; +} + +static bool cb710_is_transfer_size_supported(struct mmc_data *data) +{ + return !(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)); +} + +static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data) +{ + struct sg_mapping_iter miter; + size_t len, blocks = data->blocks; + int err = 0; + + /* TODO: I don't know how/if the hardware handles non-16B-boundary blocks + * except single 8B block */ + if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8))) + return -EINVAL; + + sg_miter_start(&miter, data->sg, data->sg_len, 0); + + cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, + 15, CB710_MMC_C2_READ_PIO_SIZE_MASK); + + cb710_mmc_fifo_hack(slot); + + while (blocks-- > 0) { + len = data->blksz; + + while (len >= 16) { + err = cb710_mmc_receive_pio(slot, &miter, 4); + if (err) + goto out; + len -= 16; + } + + if (!len) + continue; + + cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, + len - 1, CB710_MMC_C2_READ_PIO_SIZE_MASK); + + len = (len >= 8) ? 4 : 2; + err = cb710_mmc_receive_pio(slot, &miter, len); + if (err) + goto out; + } +out: + cb710_sg_miter_stop_writing(&miter); + return err; +} + +static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data) +{ + struct sg_mapping_iter miter; + size_t len, blocks = data->blocks; + int err = 0; + + /* TODO: I don't know how/if the hardware handles multiple + * non-16B-boundary blocks */ + if (unlikely(data->blocks > 1 && data->blksz & 15)) + return -EINVAL; + + sg_miter_start(&miter, data->sg, data->sg_len, 0); + + cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, + 0, CB710_MMC_C2_READ_PIO_SIZE_MASK); + + while (blocks-- > 0) { + len = (data->blksz + 15) >> 4; + do { + if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) + & CB710_MMC_S2_FIFO_EMPTY)) { + err = cb710_wait_for_event(slot, + CB710_MMC_S1_PIO_TRANSFER_DONE); + if (err) + goto out; + } + cb710_sg_dwiter_read_to_io(&miter, + slot->iobase + CB710_MMC_DATA_PORT, 4); + } while (--len); + } +out: + sg_miter_stop(&miter); + return err; +} + +static u16 cb710_encode_cmd_flags(struct cb710_mmc_reader *reader, + struct mmc_command *cmd) +{ + unsigned int flags = cmd->flags; + u16 cb_flags = 0; + + /* Windows driver returned 0 for commands for which no response + * is expected. It happened that there were only two such commands + * used: MMC_GO_IDLE_STATE and MMC_GO_INACTIVE_STATE so it might + * as well be a bug in that driver. + * + * Original driver set bit 14 for MMC/SD application + * commands. There's no difference 'on the wire' and + * it apparently works without it anyway. + */ + + switch (flags & MMC_CMD_MASK) { + case MMC_CMD_AC: cb_flags = CB710_MMC_CMD_AC; break; + case MMC_CMD_ADTC: cb_flags = CB710_MMC_CMD_ADTC; break; + case MMC_CMD_BC: cb_flags = CB710_MMC_CMD_BC; break; + case MMC_CMD_BCR: cb_flags = CB710_MMC_CMD_BCR; break; + } + + if (flags & MMC_RSP_BUSY) + cb_flags |= CB710_MMC_RSP_BUSY; + + cb_flags |= cmd->opcode << CB710_MMC_CMD_CODE_SHIFT; + + if (cmd->data && (cmd->data->flags & MMC_DATA_READ)) + cb_flags |= CB710_MMC_DATA_READ; + + if (flags & MMC_RSP_PRESENT) { + /* Windows driver set 01 at bits 4,3 except for + * MMC_SET_BLOCKLEN where it set 10. Maybe the + * hardware can do something special about this + * command? The original driver looks buggy/incomplete + * anyway so we ignore this for now. + * + * I assume that 00 here means no response is expected. + */ + cb_flags |= CB710_MMC_RSP_PRESENT; + + if (flags & MMC_RSP_136) + cb_flags |= CB710_MMC_RSP_136; + if (!(flags & MMC_RSP_CRC)) + cb_flags |= CB710_MMC_RSP_NO_CRC; + } + + return cb_flags; +} + +static void cb710_receive_response(struct cb710_slot *slot, + struct mmc_command *cmd) +{ + unsigned rsp_opcode, wanted_opcode; + + /* Looks like final byte with CRC is always stripped (same as SDHCI) */ + if (cmd->flags & MMC_RSP_136) { + u32 resp[4]; + + resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE3_PORT); + resp[1] = cb710_read_port_32(slot, CB710_MMC_RESPONSE2_PORT); + resp[2] = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT); + resp[3] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT); + rsp_opcode = resp[0] >> 24; + + cmd->resp[0] = (resp[0] << 8)|(resp[1] >> 24); + cmd->resp[1] = (resp[1] << 8)|(resp[2] >> 24); + cmd->resp[2] = (resp[2] << 8)|(resp[3] >> 24); + cmd->resp[3] = (resp[3] << 8); + } else { + rsp_opcode = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT) & 0x3F; + cmd->resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT); + } + + wanted_opcode = (cmd->flags & MMC_RSP_OPCODE) ? cmd->opcode : 0x3F; + if (rsp_opcode != wanted_opcode) + cmd->error = -EILSEQ; +} + +static int cb710_mmc_transfer_data(struct cb710_slot *slot, + struct mmc_data *data) +{ + int error, to; + + if (data->flags & MMC_DATA_READ) + error = cb710_mmc_receive(slot, data); + else + error = cb710_mmc_send(slot, data); + + to = cb710_wait_for_event(slot, CB710_MMC_S1_DATA_TRANSFER_DONE); + if (!error) + error = to; + + if (!error) + data->bytes_xfered = data->blksz * data->blocks; + return error; +} + +static int cb710_mmc_command(struct mmc_host *mmc, struct mmc_command *cmd) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + struct cb710_mmc_reader *reader = mmc_priv(mmc); + struct mmc_data *data = cmd->data; + + u16 cb_cmd = cb710_encode_cmd_flags(reader, cmd); + dev_dbg(cb710_slot_dev(slot), "cmd request: 0x%04X\n", cb_cmd); + + if (data) { + if (!cb710_is_transfer_size_supported(data)) { + data->error = -EINVAL; + return -1; + } + cb710_mmc_set_transfer_size(slot, data->blocks, data->blksz); + } + + cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20|CB710_MMC_S2_BUSY_10); + cb710_write_port_16(slot, CB710_MMC_CMD_TYPE_PORT, cb_cmd); + cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + cb710_write_port_32(slot, CB710_MMC_CMD_PARAM_PORT, cmd->arg); + cb710_mmc_reset_events(slot); + cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x01, 0); + + cmd->error = cb710_wait_for_event(slot, CB710_MMC_S1_COMMAND_SENT); + if (cmd->error) + return -1; + + if (cmd->flags & MMC_RSP_PRESENT) { + cb710_receive_response(slot, cmd); + if (cmd->error) + return -1; + } + + if (data) + data->error = cb710_mmc_transfer_data(slot, data); + return 0; +} + +static void cb710_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + struct cb710_mmc_reader *reader = mmc_priv(mmc); + + WARN_ON(reader->mrq != NULL); + + reader->mrq = mrq; + cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0); + + if (cb710_mmc_is_card_inserted(slot)) { + if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop) + cb710_mmc_command(mmc, mrq->stop); + mdelay(1); + } else { + mrq->cmd->error = -ENOMEDIUM; + } + + tasklet_schedule(&reader->finish_req_tasklet); +} + +static int cb710_mmc_powerup(struct cb710_slot *slot) +{ +#ifdef CONFIG_CB710_DEBUG + struct cb710_chip *chip = cb710_slot_to_chip(slot); +#endif + int err; + + /* a lot of magic; see comment in cb710_mmc_set_clock() */ + dev_dbg(cb710_slot_dev(slot), "bus powerup\n"); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + if (unlikely(err)) + return err; + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x80, 0); + cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x80, 0); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + mdelay(1); + dev_dbg(cb710_slot_dev(slot), "after delay 1\n"); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + if (unlikely(err)) + return err; + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x09, 0); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + mdelay(1); + dev_dbg(cb710_slot_dev(slot), "after delay 2\n"); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + if (unlikely(err)) + return err; + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x08); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + mdelay(2); + dev_dbg(cb710_slot_dev(slot), "after delay 3\n"); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0); + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x70, 0); + cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 0x80, 0); + cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x03, 0); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + if (unlikely(err)) + return err; + /* This port behaves weird: quick byte reads of 0x08,0x09 return + * 0xFF,0x00 after writing 0xFFFF to 0x08; it works correctly when + * read/written from userspace... What am I missing here? + * (it doesn't depend on write-to-read delay) */ + cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0xFFFF); + cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + dev_dbg(cb710_slot_dev(slot), "bus powerup finished\n"); + + return cb710_check_event(slot, 0); +} + +static void cb710_mmc_powerdown(struct cb710_slot *slot) +{ + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x81); + cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0, 0x80); +} + +static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + struct cb710_mmc_reader *reader = mmc_priv(mmc); + int err; + + cb710_mmc_set_clock(mmc, ios->clock); + + if (!cb710_mmc_is_card_inserted(slot)) { + dev_dbg(cb710_slot_dev(slot), + "no card inserted - ignoring bus powerup request\n"); + ios->power_mode = MMC_POWER_OFF; + } + + if (ios->power_mode != reader->last_power_mode) + switch (ios->power_mode) { + case MMC_POWER_ON: + err = cb710_mmc_powerup(slot); + if (err) { + dev_warn(cb710_slot_dev(slot), + "powerup failed (%d)- retrying\n", err); + cb710_mmc_powerdown(slot); + udelay(1); + err = cb710_mmc_powerup(slot); + if (err) + dev_warn(cb710_slot_dev(slot), + "powerup retry failed (%d) - expect errors\n", + err); + } + reader->last_power_mode = MMC_POWER_ON; + break; + case MMC_POWER_OFF: + cb710_mmc_powerdown(slot); + reader->last_power_mode = MMC_POWER_OFF; + break; + case MMC_POWER_UP: + default: + /* ignore */; + } + + cb710_mmc_enable_4bit_data(slot, ios->bus_width != MMC_BUS_WIDTH_1); + + cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0); +} + +static int cb710_mmc_get_ro(struct mmc_host *mmc) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + + return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT) + & CB710_MMC_S3_WRITE_PROTECTED; +} + +static int cb710_mmc_irq_handler(struct cb710_slot *slot) +{ + struct mmc_host *mmc = cb710_slot_to_mmc(slot); + struct cb710_mmc_reader *reader = mmc_priv(mmc); + u32 status, config1, config2, irqen; + + status = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); + irqen = cb710_read_port_32(slot, CB710_MMC_IRQ_ENABLE_PORT); + config2 = cb710_read_port_32(slot, CB710_MMC_CONFIGB_PORT); + config1 = cb710_read_port_32(slot, CB710_MMC_CONFIG_PORT); + + dev_dbg(cb710_slot_dev(slot), "interrupt; status: %08X, " + "ie: %08X, c2: %08X, c1: %08X\n", + status, irqen, config2, config1); + + if (status & (CB710_MMC_S1_CARD_CHANGED << 8)) { + /* ack the event */ + cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, + CB710_MMC_S1_CARD_CHANGED); + if ((irqen & CB710_MMC_IE_CISTATUS_MASK) + == CB710_MMC_IE_CISTATUS_MASK) + mmc_detect_change(mmc, HZ/5); + } else { + dev_dbg(cb710_slot_dev(slot), "unknown interrupt (test)\n"); + spin_lock(&reader->irq_lock); + __cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_TEST_MASK); + spin_unlock(&reader->irq_lock); + } + + return 1; +} + +static void cb710_mmc_finish_request_tasklet(unsigned long data) +{ + struct mmc_host *mmc = (void *)data; + struct cb710_mmc_reader *reader = mmc_priv(mmc); + struct mmc_request *mrq = reader->mrq; + + reader->mrq = NULL; + mmc_request_done(mmc, mrq); +} + +static const struct mmc_host_ops cb710_mmc_host = { + .request = cb710_mmc_request, + .set_ios = cb710_mmc_set_ios, + .get_ro = cb710_mmc_get_ro +}; + +#ifdef CONFIG_PM + +static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct cb710_slot *slot = cb710_pdev_to_slot(pdev); + struct mmc_host *mmc = cb710_slot_to_mmc(slot); + int err; + + err = mmc_suspend_host(mmc, state); + if (err) + return err; + + cb710_mmc_enable_irq(slot, 0, ~0); + return 0; +} + +static int cb710_mmc_resume(struct platform_device *pdev) +{ + struct cb710_slot *slot = cb710_pdev_to_slot(pdev); + struct mmc_host *mmc = cb710_slot_to_mmc(slot); + + cb710_mmc_enable_irq(slot, 0, ~0); + + return mmc_resume_host(mmc); +} + +#endif /* CONFIG_PM */ + +static int __devinit cb710_mmc_init(struct platform_device *pdev) +{ + struct cb710_slot *slot = cb710_pdev_to_slot(pdev); + struct cb710_chip *chip = cb710_slot_to_chip(slot); + struct mmc_host *mmc; + struct cb710_mmc_reader *reader; + int err; + u32 val; + + mmc = mmc_alloc_host(sizeof(*reader), cb710_slot_dev(slot)); + if (!mmc) + return -ENOMEM; + + dev_set_drvdata(&pdev->dev, mmc); + + /* harmless (maybe) magic */ + pci_read_config_dword(chip->pdev, 0x48, &val); + val = cb710_src_freq_mhz[(val >> 16) & 0xF]; + dev_dbg(cb710_slot_dev(slot), "source frequency: %dMHz\n", val); + val *= 1000000; + + mmc->ops = &cb710_mmc_host; + mmc->f_max = val; + mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX]; + mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34; + mmc->caps = MMC_CAP_4_BIT_DATA; + + reader = mmc_priv(mmc); + + tasklet_init(&reader->finish_req_tasklet, + cb710_mmc_finish_request_tasklet, (unsigned long)mmc); + spin_lock_init(&reader->irq_lock); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + + cb710_mmc_enable_irq(slot, 0, ~0); + cb710_set_irq_handler(slot, cb710_mmc_irq_handler); + + err = mmc_add_host(mmc); + if (unlikely(err)) + goto err_free_mmc; + + dev_dbg(cb710_slot_dev(slot), "mmc_hostname is %s\n", + mmc_hostname(mmc)); + + cb710_mmc_enable_irq(slot, CB710_MMC_IE_CARD_INSERTION_STATUS, 0); + + return 0; + +err_free_mmc: + dev_dbg(cb710_slot_dev(slot), "mmc_add_host() failed: %d\n", err); + + mmc_free_host(mmc); + return err; +} + +static int __devexit cb710_mmc_exit(struct platform_device *pdev) +{ + struct cb710_slot *slot = cb710_pdev_to_slot(pdev); + struct mmc_host *mmc = cb710_slot_to_mmc(slot); + struct cb710_mmc_reader *reader = mmc_priv(mmc); + + cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_CARD_INSERTION_STATUS); + + mmc_remove_host(mmc); + + /* IRQs should be disabled now, but let's stay on the safe side */ + cb710_mmc_enable_irq(slot, 0, ~0); + cb710_set_irq_handler(slot, NULL); + + /* clear config ports - just in case */ + cb710_write_port_32(slot, CB710_MMC_CONFIG_PORT, 0); + cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0); + + tasklet_kill(&reader->finish_req_tasklet); + + mmc_free_host(mmc); + return 0; +} + +static struct platform_driver cb710_mmc_driver = { + .driver.name = "cb710-mmc", + .probe = cb710_mmc_init, + .remove = __devexit_p(cb710_mmc_exit), +#ifdef CONFIG_PM + .suspend = cb710_mmc_suspend, + .resume = cb710_mmc_resume, +#endif +}; + +static int __init cb710_mmc_init_module(void) +{ + return platform_driver_register(&cb710_mmc_driver); +} + +static void __exit cb710_mmc_cleanup_module(void) +{ + platform_driver_unregister(&cb710_mmc_driver); +} + +module_init(cb710_mmc_init_module); +module_exit(cb710_mmc_cleanup_module); + +MODULE_AUTHOR("Michał Mirosław "); +MODULE_DESCRIPTION("ENE CB710 memory card reader driver - MMC/SD part"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:cb710-mmc"); diff --git a/drivers/mmc/host/cb710-mmc.h b/drivers/mmc/host/cb710-mmc.h new file mode 100644 index 000000000000..e845c776bdd7 --- /dev/null +++ b/drivers/mmc/host/cb710-mmc.h @@ -0,0 +1,104 @@ +/* + * cb710/cb710-mmc.h + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef LINUX_CB710_MMC_H +#define LINUX_CB710_MMC_H + +#include + +/* per-MMC-reader structure */ +struct cb710_mmc_reader { + struct tasklet_struct finish_req_tasklet; + struct mmc_request *mrq; + spinlock_t irq_lock; + unsigned char last_power_mode; +}; + +/* some device struct walking */ + +static inline struct mmc_host *cb710_slot_to_mmc(struct cb710_slot *slot) +{ + return dev_get_drvdata(&slot->pdev.dev); +} + +static inline struct cb710_slot *cb710_mmc_to_slot(struct mmc_host *mmc) +{ + struct platform_device *pdev = container_of(mmc_dev(mmc), + struct platform_device, dev); + return cb710_pdev_to_slot(pdev); +} + +/* registers (this might be all wrong ;) */ + +#define CB710_MMC_DATA_PORT 0x00 + +#define CB710_MMC_CONFIG_PORT 0x04 +#define CB710_MMC_CONFIG0_PORT 0x04 +#define CB710_MMC_CONFIG1_PORT 0x05 +#define CB710_MMC_C1_4BIT_DATA_BUS 0x40 +#define CB710_MMC_CONFIG2_PORT 0x06 +#define CB710_MMC_C2_READ_PIO_SIZE_MASK 0x0F /* N-1 */ +#define CB710_MMC_CONFIG3_PORT 0x07 + +#define CB710_MMC_CONFIGB_PORT 0x08 + +#define CB710_MMC_IRQ_ENABLE_PORT 0x0C +#define CB710_MMC_IE_TEST_MASK 0x00BF +#define CB710_MMC_IE_CARD_INSERTION_STATUS 0x1000 +#define CB710_MMC_IE_IRQ_ENABLE 0x8000 +#define CB710_MMC_IE_CISTATUS_MASK \ + (CB710_MMC_IE_CARD_INSERTION_STATUS|CB710_MMC_IE_IRQ_ENABLE) + +#define CB710_MMC_STATUS_PORT 0x10 +#define CB710_MMC_STATUS_ERROR_EVENTS 0x60FF +#define CB710_MMC_STATUS0_PORT 0x10 +#define CB710_MMC_S0_FIFO_UNDERFLOW 0x40 +#define CB710_MMC_STATUS1_PORT 0x11 +#define CB710_MMC_S1_COMMAND_SENT 0x01 +#define CB710_MMC_S1_DATA_TRANSFER_DONE 0x02 +#define CB710_MMC_S1_PIO_TRANSFER_DONE 0x04 +#define CB710_MMC_S1_CARD_CHANGED 0x10 +#define CB710_MMC_S1_RESET 0x20 +#define CB710_MMC_STATUS2_PORT 0x12 +#define CB710_MMC_S2_FIFO_READY 0x01 +#define CB710_MMC_S2_FIFO_EMPTY 0x02 +#define CB710_MMC_S2_BUSY_10 0x10 +#define CB710_MMC_S2_BUSY_20 0x20 +#define CB710_MMC_STATUS3_PORT 0x13 +#define CB710_MMC_S3_CARD_DETECTED 0x02 +#define CB710_MMC_S3_WRITE_PROTECTED 0x04 + +#define CB710_MMC_CMD_TYPE_PORT 0x14 +#define CB710_MMC_RSP_TYPE_MASK 0x0007 +#define CB710_MMC_RSP_R1 (0) +#define CB710_MMC_RSP_136 (5) +#define CB710_MMC_RSP_NO_CRC (2) +#define CB710_MMC_RSP_PRESENT_MASK 0x0018 +#define CB710_MMC_RSP_NONE (0 << 3) +#define CB710_MMC_RSP_PRESENT (1 << 3) +#define CB710_MMC_RSP_PRESENT_X (2 << 3) +#define CB710_MMC_CMD_TYPE_MASK 0x0060 +#define CB710_MMC_CMD_BC (0 << 5) +#define CB710_MMC_CMD_BCR (1 << 5) +#define CB710_MMC_CMD_AC (2 << 5) +#define CB710_MMC_CMD_ADTC (3 << 5) +#define CB710_MMC_DATA_READ 0x0080 +#define CB710_MMC_CMD_CODE_MASK 0x3F00 +#define CB710_MMC_CMD_CODE_SHIFT 8 +#define CB710_MMC_IS_APP_CMD 0x4000 +#define CB710_MMC_RSP_BUSY 0x8000 + +#define CB710_MMC_CMD_PARAM_PORT 0x18 +#define CB710_MMC_TRANSFER_SIZE_PORT 0x1C +#define CB710_MMC_RESPONSE0_PORT 0x20 +#define CB710_MMC_RESPONSE1_PORT 0x24 +#define CB710_MMC_RESPONSE2_PORT 0x28 +#define CB710_MMC_RESPONSE3_PORT 0x2C + +#endif /* LINUX_CB710_MMC_H */ diff --git a/include/linux/cb710.h b/include/linux/cb710.h new file mode 100644 index 000000000000..c3819e1ce1c6 --- /dev/null +++ b/include/linux/cb710.h @@ -0,0 +1,238 @@ +/* + * cb710/cb710.h + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef LINUX_CB710_DRIVER_H +#define LINUX_CB710_DRIVER_H + +#ifdef CONFIG_CB710_DEBUG +#define DEBUG +#endif + +/* verify assumptions on platform_device framework */ +#define CONFIG_CB710_DEBUG_ASSUMPTIONS + +#include +#include +#include +#include +#include +#include + +struct cb710_slot; + +typedef int (*cb710_irq_handler_t)(struct cb710_slot *); + +/* per-virtual-slot structure */ +struct cb710_slot { + struct platform_device pdev; + void __iomem *iobase; + cb710_irq_handler_t irq_handler; +}; + +/* per-device structure */ +struct cb710_chip { + struct pci_dev *pdev; + void __iomem *iobase; + unsigned platform_id; +#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS + atomic_t slot_refs_count; +#endif + unsigned slot_mask; + unsigned slots; + spinlock_t irq_lock; + struct cb710_slot slot[0]; +}; + +/* NOTE: cb710_chip.slots is modified only during device init/exit and + * they are all serialized wrt themselves */ + +/* cb710_chip.slot_mask values */ +#define CB710_SLOT_MMC 1 +#define CB710_SLOT_MS 2 +#define CB710_SLOT_SM 4 + +/* slot port accessors - so the logic is more clear in the code */ +#define CB710_PORT_ACCESSORS(t) \ +static inline void cb710_write_port_##t(struct cb710_slot *slot, \ + unsigned port, u##t value) \ +{ \ + iowrite##t(value, slot->iobase + port); \ +} \ + \ +static inline u##t cb710_read_port_##t(struct cb710_slot *slot, \ + unsigned port) \ +{ \ + return ioread##t(slot->iobase + port); \ +} \ + \ +static inline void cb710_modify_port_##t(struct cb710_slot *slot, \ + unsigned port, u##t set, u##t clear) \ +{ \ + iowrite##t( \ + (ioread##t(slot->iobase + port) & ~clear)|set, \ + slot->iobase + port); \ +} + +CB710_PORT_ACCESSORS(8) +CB710_PORT_ACCESSORS(16) +CB710_PORT_ACCESSORS(32) + +void cb710_pci_update_config_reg(struct pci_dev *pdev, + int reg, uint32_t and, uint32_t xor); +void cb710_set_irq_handler(struct cb710_slot *slot, + cb710_irq_handler_t handler); + +/* some device struct walking */ + +static inline struct cb710_slot *cb710_pdev_to_slot( + struct platform_device *pdev) +{ + return container_of(pdev, struct cb710_slot, pdev); +} + +static inline struct cb710_chip *cb710_slot_to_chip(struct cb710_slot *slot) +{ + return dev_get_drvdata(slot->pdev.dev.parent); +} + +static inline struct device *cb710_slot_dev(struct cb710_slot *slot) +{ + return &slot->pdev.dev; +} + +static inline struct device *cb710_chip_dev(struct cb710_chip *chip) +{ + return &chip->pdev->dev; +} + +/* debugging aids */ + +#ifdef CONFIG_CB710_DEBUG +void cb710_dump_regs(struct cb710_chip *chip, unsigned dump); +#else +#define cb710_dump_regs(c, d) do {} while (0) +#endif + +#define CB710_DUMP_REGS_MMC 0x0F +#define CB710_DUMP_REGS_MS 0x30 +#define CB710_DUMP_REGS_SM 0xC0 +#define CB710_DUMP_REGS_ALL 0xFF +#define CB710_DUMP_REGS_MASK 0xFF + +#define CB710_DUMP_ACCESS_8 0x100 +#define CB710_DUMP_ACCESS_16 0x200 +#define CB710_DUMP_ACCESS_32 0x400 +#define CB710_DUMP_ACCESS_ALL 0x700 +#define CB710_DUMP_ACCESS_MASK 0x700 + +#endif /* LINUX_CB710_DRIVER_H */ +/* + * cb710/sgbuf2.h + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef LINUX_CB710_SG_H +#define LINUX_CB710_SG_H + +#include +#include + +/** + * cb710_sg_miter_stop_writing - stop mapping iteration after writing + * @miter: sg mapping iter to be stopped + * + * Description: + * Stops mapping iterator @miter. @miter should have been started + * started using sg_miter_start(). A stopped iteration can be + * resumed by calling sg_miter_next() on it. This is useful when + * resources (kmap) need to be released during iteration. + * + * This is a convenience wrapper that will be optimized out for arches + * that don't need flush_kernel_dcache_page(). + * + * Context: + * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise. + */ +static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter) +{ + if (miter->page) + flush_kernel_dcache_page(miter->page); + sg_miter_stop(miter); +} + +/* + * 32-bit PIO mapping sg iterator + * + * Hides scatterlist access issues - fragment boundaries, alignment, page + * mapping - for drivers using 32-bit-word-at-a-time-PIO (ie. PCI devices + * without DMA support). + * + * Best-case reading (transfer from device): + * sg_miter_start(); + * cb710_sg_dwiter_write_from_io(); + * cb710_sg_miter_stop_writing(); + * + * Best-case writing (transfer to device): + * sg_miter_start(); + * cb710_sg_dwiter_read_to_io(); + * sg_miter_stop(); + */ + +uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter); +void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data); + +/** + * cb710_sg_dwiter_write_from_io - transfer data to mapped buffer from 32-bit IO port + * @miter: sg mapping iter + * @port: PIO port - IO or MMIO address + * @count: number of 32-bit words to transfer + * + * Description: + * Reads @count 32-bit words from register @port and stores it in + * buffer iterated by @miter. Data that would overflow the buffer + * is silently ignored. Iterator is advanced by 4*@count bytes + * or to the buffer's end whichever is closer. + * + * Context: + * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise. + */ +static inline void cb710_sg_dwiter_write_from_io(struct sg_mapping_iter *miter, + void __iomem *port, size_t count) +{ + while (count-- > 0) + cb710_sg_dwiter_write_next_block(miter, ioread32(port)); +} + +/** + * cb710_sg_dwiter_read_to_io - transfer data to 32-bit IO port from mapped buffer + * @miter: sg mapping iter + * @port: PIO port - IO or MMIO address + * @count: number of 32-bit words to transfer + * + * Description: + * Writes @count 32-bit words to register @port from buffer iterated + * through @miter. If buffer ends before @count words are written + * missing data is replaced by zeroes. @miter is advanced by 4*@count + * bytes or to the buffer's end whichever is closer. + * + * Context: + * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise. + */ +static inline void cb710_sg_dwiter_read_to_io(struct sg_mapping_iter *miter, + void __iomem *port, size_t count) +{ + while (count-- > 0) + iowrite32(cb710_sg_dwiter_read_next_block(miter), port); +} + +#endif /* LINUX_CB710_SG_H */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 19f8e6d1a4d2..9f36e1cdbf01 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2127,6 +2127,7 @@ #define PCI_VENDOR_ID_MAINPINE 0x1522 #define PCI_DEVICE_ID_MAINPINE_PBRIDGE 0x0100 #define PCI_VENDOR_ID_ENE 0x1524 +#define PCI_DEVICE_ID_ENE_CB710_FLASH 0x0510 #define PCI_DEVICE_ID_ENE_CB712_SD 0x0550 #define PCI_DEVICE_ID_ENE_CB712_SD_2 0x0551 #define PCI_DEVICE_ID_ENE_CB714_SD 0x0750