From: Chris Wilson Date: Sat, 11 Sep 2010 12:48:45 +0000 (+0100) Subject: drm/i915: Use macros to switch between equivalent pipe registers X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=5eddb70ba2b8cdbbdd563f5cb04e26fdc9b017f7;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git drm/i915: Use macros to switch between equivalent pipe registers The purpose is to make the code much easier to read and therefore reduce the possibility for bugs. A side effect is that it also makes it much easier for the compiler, reducing the object size by 4k -- from just a few functions! Signed-off-by: Chris Wilson --- diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 7e2b476df744..bc8438d6d843 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -191,12 +191,7 @@ static int i915_pipe_enabled(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - unsigned long pipeconf = pipe ? PIPEBCONF : PIPEACONF; - - if (I915_READ(pipeconf) & PIPEACONF_ENABLE) - return 1; - - return 0; + return I915_READ(PIPECONF(pipe)) & PIPECONF_ENABLE; } /* Called from drm generic code, passed a 'crtc', which @@ -207,10 +202,7 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long high_frame; unsigned long low_frame; - u32 high1, high2, low, count; - - high_frame = pipe ? PIPEBFRAMEHIGH : PIPEAFRAMEHIGH; - low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL; + u32 high1, high2, low; if (!i915_pipe_enabled(dev, pipe)) { DRM_DEBUG_DRIVER("trying to get vblank count for disabled " @@ -218,23 +210,23 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) return 0; } + high_frame = pipe ? PIPEBFRAMEHIGH : PIPEAFRAMEHIGH; + low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL; + /* * High & low register fields aren't synchronized, so make sure * we get a low value that's stable across two reads of the high * register. */ do { - high1 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >> - PIPE_FRAME_HIGH_SHIFT); - low = ((I915_READ(low_frame) & PIPE_FRAME_LOW_MASK) >> - PIPE_FRAME_LOW_SHIFT); - high2 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >> - PIPE_FRAME_HIGH_SHIFT); + high1 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK; + low = I915_READ(low_frame) & PIPE_FRAME_LOW_MASK; + high2 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK; } while (high1 != high2); - count = (high1 << 8) | low; - - return count; + high1 >>= PIPE_FRAME_HIGH_SHIFT; + low >>= PIPE_FRAME_LOW_SHIFT; + return (high1 << 8) | low; } u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) @@ -1207,11 +1199,8 @@ int i915_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - u32 pipeconf; - pipeconf = I915_READ(pipeconf_reg); - if (!(pipeconf & PIPEACONF_ENABLE)) + if (!i915_pipe_enabled(dev, pipe)) return -EINVAL; spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index eb8cb9440449..fd229abe0d86 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -25,6 +25,8 @@ #ifndef _I915_REG_H_ #define _I915_REG_H_ +#define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a))) + /* * The Bridge device's PCI config space has information about the * fb aperture size and the amount of pre-reserved memory. @@ -605,6 +607,7 @@ #define VGA1_PD_P1_MASK (0x1f << 8) #define DPLL_A 0x06014 #define DPLL_B 0x06018 +#define DPLL(pipe) _PIPE(pipe, DPLL_A, DPLL_B) #define DPLL_VCO_ENABLE (1 << 31) #define DPLL_DVO_HIGH_SPEED (1 << 30) #define DPLL_SYNCLOCK_ENABLE (1 << 29) @@ -738,10 +741,13 @@ #define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f #define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 #define DPLL_B_MD 0x06020 /* 965+ only */ +#define DPLL_MD(pipe) _PIPE(pipe, DPLL_A_MD, DPLL_B_MD) #define FPA0 0x06040 #define FPA1 0x06044 #define FPB0 0x06048 #define FPB1 0x0604c +#define FP0(pipe) _PIPE(pipe, FPA0, FPB0) +#define FP1(pipe) _PIPE(pipe, FPA1, FPB1) #define FP_N_DIV_MASK 0x003f0000 #define FP_N_PINEVIEW_DIV_MASK 0x00ff0000 #define FP_N_DIV_SHIFT 16 @@ -1156,6 +1162,15 @@ #define PIPEBSRC 0x6101c #define BCLRPAT_B 0x61020 +#define HTOTAL(pipe) _PIPE(pipe, HTOTAL_A, HTOTAL_B) +#define HBLANK(pipe) _PIPE(pipe, HBLANK_A, HBLANK_B) +#define HSYNC(pipe) _PIPE(pipe, HSYNC_A, HSYNC_B) +#define VTOTAL(pipe) _PIPE(pipe, VTOTAL_A, VTOTAL_B) +#define VBLANK(pipe) _PIPE(pipe, VBLANK_A, VBLANK_B) +#define VSYNC(pipe) _PIPE(pipe, VSYNC_A, VSYNC_B) +#define PIPESRC(pipe) _PIPE(pipe, PIPEASRC, PIPEBSRC) +#define BCLRPAT(pipe) _PIPE(pipe, BCLRPAT_A, BCLRPAT_B) + /* VGA port control */ #define ADPA 0x61100 #define ADPA_DAC_ENABLE (1<<31) @@ -2086,15 +2101,15 @@ #define PIPEADSL 0x70000 #define DSL_LINEMASK 0x00000fff #define PIPEACONF 0x70008 -#define PIPEACONF_ENABLE (1<<31) -#define PIPEACONF_DISABLE 0 -#define PIPEACONF_DOUBLE_WIDE (1<<30) +#define PIPECONF_ENABLE (1<<31) +#define PIPECONF_DISABLE 0 +#define PIPECONF_DOUBLE_WIDE (1<<30) #define I965_PIPECONF_ACTIVE (1<<30) -#define PIPEACONF_SINGLE_WIDE 0 -#define PIPEACONF_PIPE_UNLOCKED 0 -#define PIPEACONF_PIPE_LOCKED (1<<25) -#define PIPEACONF_PALETTE 0 -#define PIPEACONF_GAMMA (1<<24) +#define PIPECONF_SINGLE_WIDE 0 +#define PIPECONF_PIPE_UNLOCKED 0 +#define PIPECONF_PIPE_LOCKED (1<<25) +#define PIPECONF_PALETTE 0 +#define PIPECONF_GAMMA (1<<24) #define PIPECONF_FORCE_BORDER (1<<25) #define PIPECONF_PROGRESSIVE (0 << 21) #define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) @@ -2147,6 +2162,8 @@ #define PIPE_6BPC (2 << 5) #define PIPE_12BPC (3 << 5) +#define PIPECONF(pipe) _PIPE(pipe, PIPEACONF, PIPEBCONF) + #define DSPARB 0x70030 #define DSPARB_CSTART_MASK (0x7f << 7) #define DSPARB_CSTART_SHIFT 7 @@ -2346,6 +2363,14 @@ #define DSPASURF 0x7019C /* 965+ only */ #define DSPATILEOFF 0x701A4 /* 965+ only */ +#define DSPCNTR(plane) _PIPE(plane, DSPACNTR, DSPBCNTR) +#define DSPADDR(plane) _PIPE(plane, DSPAADDR, DSPBADDR) +#define DSPSTRIDE(plane) _PIPE(plane, DSPASTRIDE, DSPBSTRIDE) +#define DSPPOS(plane) _PIPE(plane, DSPAPOS, DSPBPOS) +#define DSPSIZE(plane) _PIPE(plane, DSPASIZE, DSPBSIZE) +#define DSPSURF(plane) _PIPE(plane, DSPASURF, DSPBSURF) +#define DSPTILEOFF(plane) _PIPE(plane, DSPATILEOFF, DSPBTILEOFF) + /* VBIOS flags */ #define SWF00 0x71410 #define SWF01 0x71414 @@ -2434,46 +2459,47 @@ #define PIPEA_DATA_M1 0x60030 #define TU_SIZE(x) (((x)-1) << 25) /* default size 64 */ #define TU_SIZE_MASK 0x7e000000 -#define PIPEA_DATA_M1_OFFSET 0 +#define PIPE_DATA_M1_OFFSET 0 #define PIPEA_DATA_N1 0x60034 -#define PIPEA_DATA_N1_OFFSET 0 +#define PIPE_DATA_N1_OFFSET 0 #define PIPEA_DATA_M2 0x60038 -#define PIPEA_DATA_M2_OFFSET 0 +#define PIPE_DATA_M2_OFFSET 0 #define PIPEA_DATA_N2 0x6003c -#define PIPEA_DATA_N2_OFFSET 0 +#define PIPE_DATA_N2_OFFSET 0 #define PIPEA_LINK_M1 0x60040 -#define PIPEA_LINK_M1_OFFSET 0 +#define PIPE_LINK_M1_OFFSET 0 #define PIPEA_LINK_N1 0x60044 -#define PIPEA_LINK_N1_OFFSET 0 +#define PIPE_LINK_N1_OFFSET 0 #define PIPEA_LINK_M2 0x60048 -#define PIPEA_LINK_M2_OFFSET 0 +#define PIPE_LINK_M2_OFFSET 0 #define PIPEA_LINK_N2 0x6004c -#define PIPEA_LINK_N2_OFFSET 0 +#define PIPE_LINK_N2_OFFSET 0 /* PIPEB timing regs are same start from 0x61000 */ #define PIPEB_DATA_M1 0x61030 -#define PIPEB_DATA_M1_OFFSET 0 #define PIPEB_DATA_N1 0x61034 -#define PIPEB_DATA_N1_OFFSET 0 #define PIPEB_DATA_M2 0x61038 -#define PIPEB_DATA_M2_OFFSET 0 #define PIPEB_DATA_N2 0x6103c -#define PIPEB_DATA_N2_OFFSET 0 #define PIPEB_LINK_M1 0x61040 -#define PIPEB_LINK_M1_OFFSET 0 #define PIPEB_LINK_N1 0x61044 -#define PIPEB_LINK_N1_OFFSET 0 #define PIPEB_LINK_M2 0x61048 -#define PIPEB_LINK_M2_OFFSET 0 #define PIPEB_LINK_N2 0x6104c -#define PIPEB_LINK_N2_OFFSET 0 + +#define PIPE_DATA_M1(pipe) _PIPE(pipe, PIPEA_DATA_M1, PIPEB_DATA_M1) +#define PIPE_DATA_N1(pipe) _PIPE(pipe, PIPEA_DATA_N1, PIPEB_DATA_N1) +#define PIPE_DATA_M2(pipe) _PIPE(pipe, PIPEA_DATA_M2, PIPEB_DATA_M2) +#define PIPE_DATA_N2(pipe) _PIPE(pipe, PIPEA_DATA_N2, PIPEB_DATA_N2) +#define PIPE_LINK_M1(pipe) _PIPE(pipe, PIPEA_LINK_M1, PIPEB_LINK_M1) +#define PIPE_LINK_N1(pipe) _PIPE(pipe, PIPEA_LINK_N1, PIPEB_LINK_N1) +#define PIPE_LINK_M2(pipe) _PIPE(pipe, PIPEA_LINK_M2, PIPEB_LINK_M2) +#define PIPE_LINK_N2(pipe) _PIPE(pipe, PIPEA_LINK_N2, PIPEB_LINK_N2) /* CPU panel fitter */ #define PFA_CTL_1 0x68080 @@ -2614,11 +2640,14 @@ #define PCH_DPLL_A 0xc6014 #define PCH_DPLL_B 0xc6018 +#define PCH_DPLL(pipe) _PIPE(pipe, PCH_DPLL_A, PCH_DPLL_B) #define PCH_FPA0 0xc6040 #define PCH_FPA1 0xc6044 #define PCH_FPB0 0xc6048 #define PCH_FPB1 0xc604c +#define PCH_FP0(pipe) _PIPE(pipe, PCH_FPA0, PCH_FPB0) +#define PCH_FP1(pipe) _PIPE(pipe, PCH_FPA1, PCH_FPB1) #define PCH_DPLL_TEST 0xc606c @@ -2704,6 +2733,13 @@ #define TRANS_VBLANK_B 0xe1010 #define TRANS_VSYNC_B 0xe1014 +#define TRANS_HTOTAL(pipe) _PIPE(pipe, TRANS_HTOTAL_A, TRANS_HTOTAL_B) +#define TRANS_HBLANK(pipe) _PIPE(pipe, TRANS_HBLANK_A, TRANS_HBLANK_B) +#define TRANS_HSYNC(pipe) _PIPE(pipe, TRANS_HSYNC_A, TRANS_HSYNC_B) +#define TRANS_VTOTAL(pipe) _PIPE(pipe, TRANS_VTOTAL_A, TRANS_VTOTAL_B) +#define TRANS_VBLANK(pipe) _PIPE(pipe, TRANS_VBLANK_A, TRANS_VBLANK_B) +#define TRANS_VSYNC(pipe) _PIPE(pipe, TRANS_VSYNC_A, TRANS_VSYNC_B) + #define TRANSB_DATA_M1 0xe1030 #define TRANSB_DATA_N1 0xe1034 #define TRANSB_DATA_M2 0xe1038 @@ -2715,6 +2751,7 @@ #define TRANSACONF 0xf0008 #define TRANSBCONF 0xf1008 +#define TRANSCONF(plane) _PIPE(plane, TRANSACONF, TRANSBCONF) #define TRANS_DISABLE (0<<31) #define TRANS_ENABLE (1<<31) #define TRANS_STATE_MASK (1<<30) @@ -2739,6 +2776,7 @@ /* CPU: FDI_TX */ #define FDI_TXA_CTL 0x60100 #define FDI_TXB_CTL 0x61100 +#define FDI_TX_CTL(pipe) _PIPE(pipe, FDI_TXA_CTL, FDI_TXB_CTL) #define FDI_TX_DISABLE (0<<31) #define FDI_TX_ENABLE (1<<31) #define FDI_LINK_TRAIN_PATTERN_1 (0<<28) @@ -2780,8 +2818,8 @@ /* FDI_RX, FDI_X is hard-wired to Transcoder_X */ #define FDI_RXA_CTL 0xf000c #define FDI_RXB_CTL 0xf100c +#define FDI_RX_CTL(pipe) _PIPE(pipe, FDI_RXA_CTL, FDI_RXB_CTL) #define FDI_RX_ENABLE (1<<31) -#define FDI_RX_DISABLE (0<<31) /* train, dp width same as FDI_TX */ #define FDI_DP_PORT_WIDTH_X8 (7<<19) #define FDI_8BPC (0<<16) @@ -2796,8 +2834,7 @@ #define FDI_FS_ERR_REPORT_ENABLE (1<<9) #define FDI_FE_ERR_REPORT_ENABLE (1<<8) #define FDI_RX_ENHANCE_FRAME_ENABLE (1<<6) -#define FDI_SEL_RAWCLK (0<<4) -#define FDI_SEL_PCDCLK (1<<4) +#define FDI_PCDCLK (1<<4) /* CPT */ #define FDI_AUTO_TRAINING (1<<10) #define FDI_LINK_TRAIN_PATTERN_1_CPT (0<<8) @@ -2812,6 +2849,9 @@ #define FDI_RXA_TUSIZE2 0xf0038 #define FDI_RXB_TUSIZE1 0xf1030 #define FDI_RXB_TUSIZE2 0xf1038 +#define FDI_RX_MISC(pipe) _PIPE(pipe, FDI_RXA_MISC, FDI_RXB_MISC) +#define FDI_RX_TUSIZE1(pipe) _PIPE(pipe, FDI_RXA_TUSIZE1, FDI_RXB_TUSIZE1) +#define FDI_RX_TUSIZE2(pipe) _PIPE(pipe, FDI_RXA_TUSIZE2, FDI_RXB_TUSIZE2) /* FDI_RX interrupt register format */ #define FDI_RX_INTER_LANE_ALIGN (1<<10) @@ -2830,6 +2870,8 @@ #define FDI_RXA_IMR 0xf0018 #define FDI_RXB_IIR 0xf1014 #define FDI_RXB_IMR 0xf1018 +#define FDI_RX_IIR(pipe) _PIPE(pipe, FDI_RXA_IIR, FDI_RXB_IIR) +#define FDI_RX_IMR(pipe) _PIPE(pipe, FDI_RXA_IMR, FDI_RXB_IMR) #define FDI_PLL_CTL_1 0xfe000 #define FDI_PLL_CTL_2 0xfe004 @@ -2949,6 +2991,7 @@ #define TRANS_DP_CTL_A 0xe0300 #define TRANS_DP_CTL_B 0xe1300 #define TRANS_DP_CTL_C 0xe2300 +#define TRANS_DP_CTL(pipe) (TRANS_DP_CTL_A + (pipe) * 0x01000) #define TRANS_DP_OUTPUT_ENABLE (1<<31) #define TRANS_DP_PORT_SEL_B (0<<29) #define TRANS_DP_PORT_SEL_C (1<<29) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3ef6d7ea1e0e..1e88ebbc1a1e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -959,26 +959,26 @@ static bool intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock) { - intel_clock_t clock; - if (target < 200000) { - clock.p1 = 2; - clock.p2 = 10; - clock.n = 2; - clock.m1 = 23; - clock.m2 = 8; - } else { - clock.p1 = 1; - clock.p2 = 10; - clock.n = 1; - clock.m1 = 14; - clock.m2 = 2; - } - clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); - clock.p = (clock.p1 * clock.p2); - clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; - clock.vco = 0; - memcpy(best_clock, &clock, sizeof(intel_clock_t)); - return true; + intel_clock_t clock; + if (target < 200000) { + clock.p1 = 2; + clock.p2 = 10; + clock.n = 2; + clock.m1 = 23; + clock.m2 = 8; + } else { + clock.p1 = 1; + clock.p2 = 10; + clock.n = 1; + clock.m1 = 14; + clock.m2 = 2; + } + clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); + clock.p = (clock.p1 * clock.p2); + clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; + clock.vco = 0; + memcpy(best_clock, &clock, sizeof(intel_clock_t)); + return true; } /** @@ -1099,7 +1099,7 @@ static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval) I915_WRITE(FBC_CONTROL, fbc_ctl); DRM_DEBUG_KMS("enabled FBC, pitch %ld, yoff %d, plane %d, ", - dev_priv->cfb_pitch, crtc->y, dev_priv->cfb_plane); + dev_priv->cfb_pitch, crtc->y, dev_priv->cfb_plane); } void i8xx_disable_fbc(struct drm_device *dev) @@ -1136,8 +1136,7 @@ static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval) struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_i915_gem_object *obj_priv = to_intel_bo(intel_fb->obj); struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int plane = (intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : - DPFC_CTL_PLANEB); + int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB; unsigned long stall_watermark = 200; u32 dpfc_ctl; @@ -1208,8 +1207,7 @@ static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval) struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_i915_gem_object *obj_priv = to_intel_bo(intel_fb->obj); struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int plane = (intel_crtc->plane == 0) ? DPFC_CTL_PLANEA : - DPFC_CTL_PLANEB; + int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB; unsigned long stall_watermark = 200; u32 dpfc_ctl; @@ -1374,14 +1372,14 @@ static void intel_update_fbc(struct drm_device *dev) if (intel_fb->obj->size > dev_priv->cfb_size) { DRM_DEBUG_KMS("framebuffer too large, disabling " - "compression\n"); + "compression\n"); dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL; goto out_disable; } if ((crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) || (crtc->mode.flags & DRM_MODE_FLAG_DBLSCAN)) { DRM_DEBUG_KMS("mode incompatible with compression, " - "disabling\n"); + "disabling\n"); dev_priv->no_fbc_reason = FBC_UNSUPPORTED_MODE; goto out_disable; } @@ -1479,12 +1477,8 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_gem_object *obj; int plane = intel_crtc->plane; unsigned long Start, Offset; - int dspbase = (plane == 0 ? DSPAADDR : DSPBADDR); - int dspsurf = (plane == 0 ? DSPASURF : DSPBSURF); - int dspstride = (plane == 0) ? DSPASTRIDE : DSPBSTRIDE; - int dsptileoff = (plane == 0 ? DSPATILEOFF : DSPBTILEOFF); - int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; u32 dspcntr; + u32 reg; switch (plane) { case 0: @@ -1499,7 +1493,8 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, obj = intel_fb->obj; obj_priv = to_intel_bo(obj); - dspcntr = I915_READ(dspcntr_reg); + reg = DSPCNTR(plane); + dspcntr = I915_READ(reg); /* Mask out pixel format bits in case we change it */ dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; switch (fb->bits_per_pixel) { @@ -1531,22 +1526,21 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, /* must disable */ dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE; - I915_WRITE(dspcntr_reg, dspcntr); + I915_WRITE(reg, dspcntr); Start = obj_priv->gtt_offset; Offset = y * fb->pitch + x * (fb->bits_per_pixel / 8); DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n", Start, Offset, x, y, fb->pitch); - I915_WRITE(dspstride, fb->pitch); + I915_WRITE(DSPSTRIDE(plane), fb->pitch); if (IS_I965G(dev)) { - I915_WRITE(dspsurf, Start); - I915_WRITE(dsptileoff, (y << 16) | x); - I915_WRITE(dspbase, Offset); - } else { - I915_WRITE(dspbase, Start + Offset); - } - POSTING_READ(dspbase); + I915_WRITE(DSPSURF(plane), Start); + I915_WRITE(DSPTILEOFF(plane), (y << 16) | x); + I915_WRITE(DSPADDR(plane), Offset); + } else + I915_WRITE(DSPADDR(plane), Start + Offset); + POSTING_READ(reg); intel_update_fbc(dev); intel_increase_pllclock(crtc); @@ -1634,7 +1628,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return 0; } -static void ironlake_set_pll_edp (struct drm_crtc *crtc, int clock) +static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -1666,8 +1660,8 @@ static void ironlake_set_pll_edp (struct drm_crtc *crtc, int clock) dpa_ctl |= DP_PLL_FREQ_270MHZ; } I915_WRITE(DP_A, dpa_ctl); - POSTING_READ(DP_A); + POSTING_READ(DP_A); udelay(500); } @@ -1678,85 +1672,84 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL; - int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; - int fdi_rx_iir_reg = (pipe == 0) ? FDI_RXA_IIR : FDI_RXB_IIR; - int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR; - u32 temp, tries = 0; + u32 reg, temp, tries; /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ - temp = I915_READ(fdi_rx_imr_reg); + reg = FDI_RX_IMR(pipe); + temp = I915_READ(reg); temp &= ~FDI_RX_SYMBOL_LOCK; temp &= ~FDI_RX_BIT_LOCK; - I915_WRITE(fdi_rx_imr_reg, temp); - I915_READ(fdi_rx_imr_reg); + I915_WRITE(reg, temp); + I915_READ(reg); udelay(150); /* enable CPU FDI TX and PCH FDI RX */ - temp = I915_READ(fdi_tx_reg); - temp |= FDI_TX_ENABLE; + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); temp &= ~(7 << 19); temp |= (intel_crtc->fdi_lanes - 1) << 19; temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; - I915_WRITE(fdi_tx_reg, temp); - I915_READ(fdi_tx_reg); + I915_WRITE(reg, temp | FDI_TX_ENABLE); - temp = I915_READ(fdi_rx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; - I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE); - I915_READ(fdi_rx_reg); + I915_WRITE(reg, temp | FDI_RX_ENABLE); + + POSTING_READ(reg); udelay(150); + reg = FDI_RX_IIR(pipe); for (tries = 0; tries < 5; tries++) { - temp = I915_READ(fdi_rx_iir_reg); + temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if ((temp & FDI_RX_BIT_LOCK)) { DRM_DEBUG_KMS("FDI train 1 done.\n"); - I915_WRITE(fdi_rx_iir_reg, - temp | FDI_RX_BIT_LOCK); + I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); break; } } if (tries == 5) - DRM_DEBUG_KMS("FDI train 1 fail!\n"); + DRM_ERROR("FDI train 1 fail!\n"); /* Train 2 */ - temp = I915_READ(fdi_tx_reg); + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; - I915_WRITE(fdi_tx_reg, temp); + I915_WRITE(reg, temp); - temp = I915_READ(fdi_rx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; - I915_WRITE(fdi_rx_reg, temp); - POSTING_READ(fdi_rx_reg); - udelay(150); + I915_WRITE(reg, temp); - tries = 0; + POSTING_READ(reg); + udelay(150); + reg = FDI_RX_IIR(pipe); for (tries = 0; tries < 5; tries++) { - temp = I915_READ(fdi_rx_iir_reg); + temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_SYMBOL_LOCK) { - I915_WRITE(fdi_rx_iir_reg, - temp | FDI_RX_SYMBOL_LOCK); + I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); DRM_DEBUG_KMS("FDI train 2 done.\n"); break; } } if (tries == 5) - DRM_DEBUG_KMS("FDI train 2 fail!\n"); + DRM_ERROR("FDI train 2 fail!\n"); DRM_DEBUG_KMS("FDI train done\n"); } -static int snb_b_fdi_train_param [] = { +static const int const snb_b_fdi_train_param [] = { FDI_LINK_TRAIN_400MV_0DB_SNB_B, FDI_LINK_TRAIN_400MV_6DB_SNB_B, FDI_LINK_TRAIN_600MV_3_5DB_SNB_B, @@ -1770,24 +1763,22 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL; - int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; - int fdi_rx_iir_reg = (pipe == 0) ? FDI_RXA_IIR : FDI_RXB_IIR; - int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR; - u32 temp, i; + u32 reg, temp, i; /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ - temp = I915_READ(fdi_rx_imr_reg); + reg = FDI_RX_IMR(pipe); + temp = I915_READ(reg); temp &= ~FDI_RX_SYMBOL_LOCK; temp &= ~FDI_RX_BIT_LOCK; - I915_WRITE(fdi_rx_imr_reg, temp); - I915_READ(fdi_rx_imr_reg); + I915_WRITE(reg, temp); + + POSTING_READ(reg); udelay(150); /* enable CPU FDI TX and PCH FDI RX */ - temp = I915_READ(fdi_tx_reg); - temp |= FDI_TX_ENABLE; + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); temp &= ~(7 << 19); temp |= (intel_crtc->fdi_lanes - 1) << 19; temp &= ~FDI_LINK_TRAIN_NONE; @@ -1795,10 +1786,10 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; /* SNB-B */ temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; - I915_WRITE(fdi_tx_reg, temp); - I915_READ(fdi_tx_reg); + I915_WRITE(reg, temp | FDI_TX_ENABLE); - temp = I915_READ(fdi_rx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); if (HAS_PCH_CPT(dev)) { temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; @@ -1806,33 +1797,37 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; } - I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE); - I915_READ(fdi_rx_reg); + I915_WRITE(reg, temp | FDI_RX_ENABLE); + + POSTING_READ(reg); udelay(150); for (i = 0; i < 4; i++ ) { - temp = I915_READ(fdi_tx_reg); + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= snb_b_fdi_train_param[i]; - I915_WRITE(fdi_tx_reg, temp); - POSTING_READ(fdi_tx_reg); + I915_WRITE(reg, temp); + + POSTING_READ(reg); udelay(500); - temp = I915_READ(fdi_rx_iir_reg); + reg = FDI_RX_IIR(pipe); + temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_BIT_LOCK) { - I915_WRITE(fdi_rx_iir_reg, - temp | FDI_RX_BIT_LOCK); + I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); DRM_DEBUG_KMS("FDI train 1 done.\n"); break; } } if (i == 4) - DRM_DEBUG_KMS("FDI train 1 fail!\n"); + DRM_ERROR("FDI train 1 fail!\n"); /* Train 2 */ - temp = I915_READ(fdi_tx_reg); + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; if (IS_GEN6(dev)) { @@ -1840,9 +1835,10 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) /* SNB-B */ temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; } - I915_WRITE(fdi_tx_reg, temp); + I915_WRITE(reg, temp); - temp = I915_READ(fdi_rx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); if (HAS_PCH_CPT(dev)) { temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_PATTERN_2_CPT; @@ -1850,30 +1846,33 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; } - I915_WRITE(fdi_rx_reg, temp); - POSTING_READ(fdi_rx_reg); + I915_WRITE(reg, temp); + + POSTING_READ(reg); udelay(150); for (i = 0; i < 4; i++ ) { - temp = I915_READ(fdi_tx_reg); + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= snb_b_fdi_train_param[i]; - I915_WRITE(fdi_tx_reg, temp); - POSTING_READ(fdi_tx_reg); + I915_WRITE(reg, temp); + + POSTING_READ(reg); udelay(500); - temp = I915_READ(fdi_rx_iir_reg); + reg = FDI_RX_IIR(pipe); + temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_SYMBOL_LOCK) { - I915_WRITE(fdi_rx_iir_reg, - temp | FDI_RX_SYMBOL_LOCK); + I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); DRM_DEBUG_KMS("FDI train 2 done.\n"); break; } } if (i == 4) - DRM_DEBUG_KMS("FDI train 2 fail!\n"); + DRM_ERROR("FDI train 2 fail!\n"); DRM_DEBUG_KMS("FDI train done.\n"); } @@ -1884,50 +1883,49 @@ static void ironlake_fdi_enable(struct drm_crtc *crtc) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL; - int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; - int data_m1_reg = (pipe == 0) ? PIPEA_DATA_M1 : PIPEB_DATA_M1; - u32 temp; - u32 pipe_bpc; - u32 tx_size; - - temp = I915_READ(pipeconf_reg); - pipe_bpc = temp & PIPE_BPC_MASK; + u32 reg, temp; /* Write the TU size bits so error detection works */ - tx_size = I915_READ(data_m1_reg) & TU_SIZE_MASK; - I915_WRITE(FDI_RXA_TUSIZE1, tx_size); + I915_WRITE(FDI_RX_TUSIZE1(pipe), + I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK); /* enable PCH FDI RX PLL, wait warmup plus DMI latency */ - temp = I915_READ(fdi_rx_reg); - /* - * make the BPC in FDI Rx be consistent with that in - * pipeconf reg. - */ - temp &= ~(0x7 << 16); - temp |= (pipe_bpc << 11); - temp &= ~(7 << 19); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~((0x7 << 19) | (0x7 << 16)); temp |= (intel_crtc->fdi_lanes - 1) << 19; - I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE); - I915_READ(fdi_rx_reg); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE); + + POSTING_READ(reg); udelay(200); /* Switch from Rawclk to PCDclk */ - temp = I915_READ(fdi_rx_reg); - I915_WRITE(fdi_rx_reg, temp | FDI_SEL_PCDCLK); - I915_READ(fdi_rx_reg); + temp = I915_READ(reg); + I915_WRITE(reg, temp | FDI_PCDCLK); + + POSTING_READ(reg); udelay(200); /* Enable CPU FDI TX PLL, always on for Ironlake */ - temp = I915_READ(fdi_tx_reg); + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); if ((temp & FDI_TX_PLL_ENABLE) == 0) { - I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE); - I915_READ(fdi_tx_reg); + I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE); + + POSTING_READ(reg); udelay(100); } } +static void intel_flush_display_plane(struct drm_device *dev, + int plane) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg = DSPADDR(plane); + I915_WRITE(reg, I915_READ(reg)); +} + static void ironlake_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -1935,38 +1933,12 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; - int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; - int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR; - int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL; - int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; - int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF; - int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; - int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; - int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; - int cpu_vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; - int cpu_vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; - int cpu_vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; - int trans_htot_reg = (pipe == 0) ? TRANS_HTOTAL_A : TRANS_HTOTAL_B; - int trans_hblank_reg = (pipe == 0) ? TRANS_HBLANK_A : TRANS_HBLANK_B; - int trans_hsync_reg = (pipe == 0) ? TRANS_HSYNC_A : TRANS_HSYNC_B; - int trans_vtot_reg = (pipe == 0) ? TRANS_VTOTAL_A : TRANS_VTOTAL_B; - int trans_vblank_reg = (pipe == 0) ? TRANS_VBLANK_A : TRANS_VBLANK_B; - int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B; - int trans_dpll_sel = (pipe == 0) ? 0 : 1; - u32 temp; - u32 pipe_bpc; - - temp = I915_READ(pipeconf_reg); - pipe_bpc = temp & PIPE_BPC_MASK; + u32 reg, temp; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { temp = I915_READ(PCH_LVDS); - if ((temp & LVDS_PORT_EN) == 0) { + if ((temp & LVDS_PORT_EN) == 0) I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN); - POSTING_READ(PCH_LVDS); - } } ironlake_fdi_enable(crtc); @@ -1988,19 +1960,20 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) } /* Enable CPU pipe */ - temp = I915_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) == 0) { - I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); - I915_READ(pipeconf_reg); + reg = PIPECONF(pipe); + temp = I915_READ(reg); + if ((temp & PIPECONF_ENABLE) == 0) { + I915_WRITE(reg, temp | PIPECONF_ENABLE); + POSTING_READ(reg); udelay(100); } /* configure and enable CPU plane */ - temp = I915_READ(dspcntr_reg); + reg = DSPCNTR(plane); + temp = I915_READ(reg); if ((temp & DISPLAY_PLANE_ENABLE) == 0) { - I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + I915_WRITE(reg, temp | DISPLAY_PLANE_ENABLE); + intel_flush_display_plane(dev, plane); } /* For PCH output, training FDI link */ @@ -2010,42 +1983,42 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) ironlake_fdi_link_train(crtc); /* enable PCH DPLL */ - temp = I915_READ(pch_dpll_reg); + reg = PCH_DPLL(pipe); + temp = I915_READ(reg); if ((temp & DPLL_VCO_ENABLE) == 0) { - I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE); - I915_READ(pch_dpll_reg); + I915_WRITE(reg, temp | DPLL_VCO_ENABLE); + POSTING_READ(reg); udelay(200); } if (HAS_PCH_CPT(dev)) { /* Be sure PCH DPLL SEL is set */ temp = I915_READ(PCH_DPLL_SEL); - if (trans_dpll_sel == 0 && - (temp & TRANSA_DPLL_ENABLE) == 0) + if (pipe == 0 && (temp & TRANSA_DPLL_ENABLE) == 0) temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL); - else if (trans_dpll_sel == 1 && - (temp & TRANSB_DPLL_ENABLE) == 0) + else if (pipe == 1 && (temp & TRANSB_DPLL_ENABLE) == 0) temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); I915_WRITE(PCH_DPLL_SEL, temp); - I915_READ(PCH_DPLL_SEL); } + /* set transcoder timing */ - I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg)); - I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg)); - I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg)); + I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe))); + I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe))); + I915_WRITE(TRANS_HSYNC(pipe), I915_READ(HSYNC(pipe))); - I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg)); - I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg)); - I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg)); + I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe))); + I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe))); + I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe))); /* enable normal train */ - temp = I915_READ(fdi_tx_reg); + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; - I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE | - FDI_TX_ENHANCE_FRAME_ENABLE); - I915_READ(fdi_tx_reg); + temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE; + I915_WRITE(reg, temp); - temp = I915_READ(fdi_rx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); if (HAS_PCH_CPT(dev)) { temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_NORMAL_CPT; @@ -2053,61 +2026,57 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_NONE; } - I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE); - I915_READ(fdi_rx_reg); + I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE); /* wait one idle pattern time */ + POSTING_READ(reg); udelay(100); /* For PCH DP, enable TRANS_DP_CTL */ if (HAS_PCH_CPT(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { - int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B; - int reg; - - reg = I915_READ(trans_dp_ctl); - reg &= ~(TRANS_DP_PORT_SEL_MASK | - TRANS_DP_SYNC_MASK); - reg |= (TRANS_DP_OUTPUT_ENABLE | - TRANS_DP_ENH_FRAMING); + reg = TRANS_DP_CTL(pipe); + temp = I915_READ(reg); + temp &= ~(TRANS_DP_PORT_SEL_MASK | + TRANS_DP_SYNC_MASK); + temp |= (TRANS_DP_OUTPUT_ENABLE | + TRANS_DP_ENH_FRAMING); if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) - reg |= TRANS_DP_HSYNC_ACTIVE_HIGH; + temp |= TRANS_DP_HSYNC_ACTIVE_HIGH; if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC) - reg |= TRANS_DP_VSYNC_ACTIVE_HIGH; + temp |= TRANS_DP_VSYNC_ACTIVE_HIGH; switch (intel_trans_dp_port_sel(crtc)) { case PCH_DP_B: - reg |= TRANS_DP_PORT_SEL_B; + temp |= TRANS_DP_PORT_SEL_B; break; case PCH_DP_C: - reg |= TRANS_DP_PORT_SEL_C; + temp |= TRANS_DP_PORT_SEL_C; break; case PCH_DP_D: - reg |= TRANS_DP_PORT_SEL_D; + temp |= TRANS_DP_PORT_SEL_D; break; default: DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n"); - reg |= TRANS_DP_PORT_SEL_B; + temp |= TRANS_DP_PORT_SEL_B; break; } - I915_WRITE(trans_dp_ctl, reg); - POSTING_READ(trans_dp_ctl); + I915_WRITE(reg, temp); } /* enable PCH transcoder */ - temp = I915_READ(transconf_reg); + reg = TRANSCONF(pipe); + temp = I915_READ(reg); /* * make the BPC in transcoder be consistent with * that in pipeconf reg. */ temp &= ~PIPE_BPC_MASK; - temp |= pipe_bpc; - I915_WRITE(transconf_reg, temp | TRANS_ENABLE); - I915_READ(transconf_reg); - - if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 100)) + temp |= I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK; + I915_WRITE(reg, temp | TRANS_ENABLE); + if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100)) DRM_ERROR("failed to enable transcoder\n"); intel_crtc_load_lut(crtc); @@ -2121,28 +2090,16 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; - int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; - int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR; - int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL; - int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; - int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF; - int trans_dpll_sel = (pipe == 0) ? 0 : 1; - u32 temp; - u32 pipe_bpc; - - temp = I915_READ(pipeconf_reg); - pipe_bpc = temp & PIPE_BPC_MASK; + u32 reg, temp; drm_vblank_off(dev, pipe); + /* Disable display plane */ - temp = I915_READ(dspcntr_reg); - if ((temp & DISPLAY_PLANE_ENABLE) != 0) { - I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); - I915_READ(dspbase_reg); + reg = DSPCNTR(plane); + temp = I915_READ(reg); + if (temp & DISPLAY_PLANE_ENABLE) { + I915_WRITE(reg, temp & ~DISPLAY_PLANE_ENABLE); + intel_flush_display_plane(dev, plane); } if (dev_priv->cfb_plane == plane && @@ -2150,42 +2107,43 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) dev_priv->display.disable_fbc(dev); /* disable cpu pipe, disable after all planes disabled */ - temp = I915_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) != 0) { - I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); - + reg = PIPECONF(pipe); + temp = I915_READ(reg); + if (temp & PIPECONF_ENABLE) { + I915_WRITE(reg, temp & ~PIPECONF_ENABLE); /* wait for cpu pipe off, pipe state */ - if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, 50)) + if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0, 50)) DRM_ERROR("failed to turn off cpu pipe\n"); - } else - DRM_DEBUG_KMS("crtc %d is disabled\n", pipe); + } /* Disable PF */ I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1, 0); I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ, 0); /* disable CPU FDI tx and PCH FDI rx */ - temp = I915_READ(fdi_tx_reg); - I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_ENABLE); - I915_READ(fdi_tx_reg); + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_TX_ENABLE); + POSTING_READ(reg); - temp = I915_READ(fdi_rx_reg); - /* BPC in FDI rx is consistent with that in pipeconf */ - temp &= ~(0x07 << 16); - temp |= (pipe_bpc << 11); - I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE); - I915_READ(fdi_rx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~(0x7 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp & ~FDI_RX_ENABLE); + POSTING_READ(reg); udelay(100); /* still set train pattern 1 */ - temp = I915_READ(fdi_tx_reg); + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; - I915_WRITE(fdi_tx_reg, temp); - POSTING_READ(fdi_tx_reg); + I915_WRITE(reg, temp); - temp = I915_READ(fdi_rx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); if (HAS_PCH_CPT(dev)) { temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; @@ -2193,80 +2151,73 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; } - I915_WRITE(fdi_rx_reg, temp); - POSTING_READ(fdi_rx_reg); + /* BPC in FDI rx is consistent with that in PIPECONF */ + temp &= ~(0x07 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp); + POSTING_READ(reg); udelay(100); if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { temp = I915_READ(PCH_LVDS); - I915_WRITE(PCH_LVDS, temp & ~LVDS_PORT_EN); - I915_READ(PCH_LVDS); - udelay(100); + if (temp & LVDS_PORT_EN) { + I915_WRITE(PCH_LVDS, temp & ~LVDS_PORT_EN); + POSTING_READ(PCH_LVDS); + udelay(100); + } } /* disable PCH transcoder */ - temp = I915_READ(transconf_reg); - if ((temp & TRANS_ENABLE) != 0) { - I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE); - + reg = TRANSCONF(plane); + temp = I915_READ(reg); + if (temp & TRANS_ENABLE) { + I915_WRITE(reg, temp & ~TRANS_ENABLE); /* wait for PCH transcoder off, transcoder state */ - if (wait_for((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0, 50)) + if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50)) DRM_ERROR("failed to disable transcoder\n"); } - temp = I915_READ(transconf_reg); - /* BPC in transcoder is consistent with that in pipeconf */ - temp &= ~PIPE_BPC_MASK; - temp |= pipe_bpc; - I915_WRITE(transconf_reg, temp); - I915_READ(transconf_reg); - udelay(100); - if (HAS_PCH_CPT(dev)) { /* disable TRANS_DP_CTL */ - int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B; - int reg; - - reg = I915_READ(trans_dp_ctl); - reg &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK); - I915_WRITE(trans_dp_ctl, reg); - POSTING_READ(trans_dp_ctl); + reg = TRANS_DP_CTL(pipe); + temp = I915_READ(reg); + temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK); + I915_WRITE(reg, temp); /* disable DPLL_SEL */ temp = I915_READ(PCH_DPLL_SEL); - if (trans_dpll_sel == 0) + if (pipe == 0) temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL); else temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); I915_WRITE(PCH_DPLL_SEL, temp); - I915_READ(PCH_DPLL_SEL); - } /* disable PCH DPLL */ - temp = I915_READ(pch_dpll_reg); - I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE); - I915_READ(pch_dpll_reg); + reg = PCH_DPLL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~DPLL_VCO_ENABLE); /* Switch from PCDclk to Rawclk */ - temp = I915_READ(fdi_rx_reg); - temp &= ~FDI_SEL_PCDCLK; - I915_WRITE(fdi_rx_reg, temp); - I915_READ(fdi_rx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_PCDCLK); /* Disable CPU FDI TX PLL */ - temp = I915_READ(fdi_tx_reg); - I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_PLL_ENABLE); - I915_READ(fdi_tx_reg); + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE); + + POSTING_READ(reg); udelay(100); - temp = I915_READ(fdi_rx_reg); - temp &= ~FDI_RX_PLL_ENABLE; - I915_WRITE(fdi_rx_reg, temp); - I915_READ(fdi_rx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE); /* Wait for the clocks to turn off. */ + POSTING_READ(reg); udelay(100); } @@ -2316,40 +2267,43 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc) struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; - int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; - int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; - int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - u32 temp; + u32 reg, temp; /* Enable the DPLL */ - temp = I915_READ(dpll_reg); + reg = DPLL(pipe); + temp = I915_READ(reg); if ((temp & DPLL_VCO_ENABLE) == 0) { - I915_WRITE(dpll_reg, temp); - I915_READ(dpll_reg); + I915_WRITE(reg, temp); + /* Wait for the clocks to stabilize. */ + POSTING_READ(reg); udelay(150); - I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); - I915_READ(dpll_reg); + + I915_WRITE(reg, temp | DPLL_VCO_ENABLE); + /* Wait for the clocks to stabilize. */ + POSTING_READ(reg); udelay(150); - I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); - I915_READ(dpll_reg); + + I915_WRITE(reg, temp | DPLL_VCO_ENABLE); + /* Wait for the clocks to stabilize. */ + POSTING_READ(reg); udelay(150); } /* Enable the pipe */ - temp = I915_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) == 0) - I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); + reg = PIPECONF(pipe); + temp = I915_READ(reg); + if ((temp & PIPECONF_ENABLE) == 0) + I915_WRITE(reg, temp | PIPECONF_ENABLE); /* Enable the plane */ - temp = I915_READ(dspcntr_reg); + reg = DSPCNTR(plane); + temp = I915_READ(reg); if ((temp & DISPLAY_PLANE_ENABLE) == 0) { - I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + I915_WRITE(reg, temp | DISPLAY_PLANE_ENABLE); + intel_flush_display_plane(dev, plane); } intel_crtc_load_lut(crtc); @@ -2366,11 +2320,7 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; - int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; - int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; - int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - u32 temp; + u32 reg, temp; /* Give the overlay scaler a chance to disable if it's on this pipe */ intel_crtc_dpms_overlay(intel_crtc, false); @@ -2381,42 +2331,42 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) dev_priv->display.disable_fbc(dev); /* Disable display plane */ - temp = I915_READ(dspcntr_reg); - if ((temp & DISPLAY_PLANE_ENABLE) != 0) { - I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE); + reg = DSPCNTR(plane); + temp = I915_READ(reg); + if (temp & DISPLAY_PLANE_ENABLE) { + I915_WRITE(reg, temp & ~DISPLAY_PLANE_ENABLE); /* Flush the plane changes */ - I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); - I915_READ(dspbase_reg); - } + intel_flush_display_plane(dev, plane); - if (!IS_I9XX(dev)) { /* Wait for vblank for the disable to take effect */ - intel_wait_for_vblank_off(dev, pipe); + if (!IS_I9XX(dev)) + intel_wait_for_vblank_off(dev, pipe); } /* Don't disable pipe A or pipe A PLLs if needed */ - if (pipeconf_reg == PIPEACONF && - (dev_priv->quirks & QUIRK_PIPEA_FORCE)) - goto skip_pipe_off; + if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) + return; /* Next, disable display pipes */ - temp = I915_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) != 0) { - I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); - I915_READ(pipeconf_reg); + reg = PIPECONF(pipe); + temp = I915_READ(reg); + if (temp & PIPECONF_ENABLE) { + I915_WRITE(reg, temp & ~PIPECONF_ENABLE); + + /* Wait for vblank for the disable to take effect. */ + POSTING_READ(reg); + intel_wait_for_vblank_off(dev, pipe); } - /* Wait for vblank for the disable to take effect. */ - intel_wait_for_vblank_off(dev, pipe); + reg = DPLL(pipe); + temp = I915_READ(reg); + if (temp & DPLL_VCO_ENABLE) { + I915_WRITE(reg, temp & ~DPLL_VCO_ENABLE); - temp = I915_READ(dpll_reg); - if ((temp & DPLL_VCO_ENABLE) != 0) { - I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE); - I915_READ(dpll_reg); + /* Wait for the clocks to turn off. */ + POSTING_READ(reg); + udelay(150); } -skip_pipe_off: - /* Wait for the clocks to turn off. */ - udelay(150); } static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) @@ -3030,7 +2980,7 @@ static int i9xx_get_fifo_size(struct drm_device *dev, int plane) size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size; DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, - plane ? "B" : "A", size); + plane ? "B" : "A", size); return size; } @@ -3047,7 +2997,7 @@ static int i85x_get_fifo_size(struct drm_device *dev, int plane) size >>= 1; /* Convert to cachelines */ DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, - plane ? "B" : "A", size); + plane ? "B" : "A", size); return size; } @@ -3062,8 +3012,8 @@ static int i845_get_fifo_size(struct drm_device *dev, int plane) size >>= 2; /* Convert to cachelines */ DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, - plane ? "B" : "A", - size); + plane ? "B" : "A", + size); return size; } @@ -3078,14 +3028,14 @@ static int i830_get_fifo_size(struct drm_device *dev, int plane) size >>= 1; /* Convert to cachelines */ DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, - plane ? "B" : "A", size); + plane ? "B" : "A", size); return size; } static void pineview_update_wm(struct drm_device *dev, int planea_clock, - int planeb_clock, int sr_hdisplay, int unused, - int pixel_size) + int planeb_clock, int sr_hdisplay, int unused, + int pixel_size) { struct drm_i915_private *dev_priv = dev->dev_private; const struct cxsr_latency *latency; @@ -3197,13 +3147,13 @@ static void g4x_update_wm(struct drm_device *dev, int planea_clock, /* Use ns/us then divide to preserve precision */ sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * - pixel_size * sr_hdisplay; + pixel_size * sr_hdisplay; sr_entries = DIV_ROUND_UP(sr_entries, cacheline_size); entries_required = (((sr_latency_ns / line_time_us) + 1000) / 1000) * pixel_size * 64; entries_required = DIV_ROUND_UP(entries_required, - g4x_cursor_wm_info.cacheline_size); + g4x_cursor_wm_info.cacheline_size); cursor_sr = entries_required + g4x_cursor_wm_info.guard_size; if (cursor_sr > g4x_cursor_wm_info.max_wm) @@ -3215,7 +3165,7 @@ static void g4x_update_wm(struct drm_device *dev, int planea_clock, } else { /* Turn off self refresh if both pipes are enabled */ I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) - & ~FW_BLC_SELF_EN); + & ~FW_BLC_SELF_EN); } DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n", @@ -3253,7 +3203,7 @@ static void i965_update_wm(struct drm_device *dev, int planea_clock, /* Use ns/us then divide to preserve precision */ sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * - pixel_size * sr_hdisplay; + pixel_size * sr_hdisplay; sr_entries = DIV_ROUND_UP(sr_entries, I915_FIFO_LINE_SIZE); DRM_DEBUG("self-refresh entries: %d\n", sr_entries); srwm = I965_FIFO_SIZE - sr_entries; @@ -3262,11 +3212,11 @@ static void i965_update_wm(struct drm_device *dev, int planea_clock, srwm &= 0x1ff; sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * - pixel_size * 64; + pixel_size * 64; sr_entries = DIV_ROUND_UP(sr_entries, i965_cursor_wm_info.cacheline_size); cursor_sr = i965_cursor_wm_info.fifo_size - - (sr_entries + i965_cursor_wm_info.guard_size); + (sr_entries + i965_cursor_wm_info.guard_size); if (cursor_sr > i965_cursor_wm_info.max_wm) cursor_sr = i965_cursor_wm_info.max_wm; @@ -3345,7 +3295,7 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock, /* Use ns/us then divide to preserve precision */ sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * - pixel_size * sr_hdisplay; + pixel_size * sr_hdisplay; sr_entries = DIV_ROUND_UP(sr_entries, cacheline_size); DRM_DEBUG_KMS("self-refresh entries: %d\n", sr_entries); srwm = total_size - sr_entries; @@ -3370,7 +3320,7 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock, } DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n", - planea_wm, planeb_wm, cwm, srwm); + planea_wm, planeb_wm, cwm, srwm); fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f); fwater_hi = (cwm & 0x1f); @@ -3489,7 +3439,7 @@ static void ironlake_update_wm(struct drm_device *dev, /* Use ns/us then divide to preserve precision */ line_count = ((ilk_sr_latency * 500) / line_time_us + 1000) - / 1000; + / 1000; line_size = sr_hdisplay * pixel_size; /* Use the minimum of the small and large buffer method for primary */ @@ -3559,7 +3509,7 @@ static void ironlake_update_wm(struct drm_device *dev, * * We don't use the sprite, so we can ignore that. And on Crestline we have * to set the non-SR watermarks to 8. - */ + */ static void intel_update_watermarks(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -3579,11 +3529,11 @@ static void intel_update_watermarks(struct drm_device *dev) enabled++; if (intel_crtc->plane == 0) { DRM_DEBUG_KMS("plane A (pipe %d) clock: %d\n", - intel_crtc->pipe, crtc->mode.clock); + intel_crtc->pipe, crtc->mode.clock); planea_clock = crtc->mode.clock; } else { DRM_DEBUG_KMS("plane B (pipe %d) clock: %d\n", - intel_crtc->pipe, crtc->mode.clock); + intel_crtc->pipe, crtc->mode.clock); planeb_clock = crtc->mode.clock; } sr_hdisplay = crtc->mode.hdisplay; @@ -3614,61 +3564,35 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; - int fp_reg = (pipe == 0) ? FPA0 : FPB0; - int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; - int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD; - int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; - int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; - int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; - int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; - int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; - int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; - int dspsize_reg = (plane == 0) ? DSPASIZE : DSPBSIZE; - int dsppos_reg = (plane == 0) ? DSPAPOS : DSPBPOS; - int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; + u32 fp_reg, dpll_reg; int refclk, num_connectors = 0; intel_clock_t clock, reduced_clock; - u32 dpll = 0, fp = 0, fp2 = 0, dspcntr, pipeconf; + u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf; bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false; bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; struct intel_encoder *has_edp_encoder = NULL; struct drm_mode_config *mode_config = &dev->mode_config; - struct drm_encoder *encoder; + struct intel_encoder *encoder; const intel_limit_t *limit; int ret; struct fdi_m_n m_n = {0}; - int data_m1_reg = (pipe == 0) ? PIPEA_DATA_M1 : PIPEB_DATA_M1; - int data_n1_reg = (pipe == 0) ? PIPEA_DATA_N1 : PIPEB_DATA_N1; - int link_m1_reg = (pipe == 0) ? PIPEA_LINK_M1 : PIPEB_LINK_M1; - int link_n1_reg = (pipe == 0) ? PIPEA_LINK_N1 : PIPEB_LINK_N1; - int pch_fp_reg = (pipe == 0) ? PCH_FPA0 : PCH_FPB0; - int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B; - int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; - int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL; - int trans_dpll_sel = (pipe == 0) ? 0 : 1; - int lvds_reg = LVDS; - u32 temp; + u32 reg, temp; int target_clock; drm_vblank_pre_modeset(dev, pipe); - list_for_each_entry(encoder, &mode_config->encoder_list, head) { - struct intel_encoder *intel_encoder; - - if (encoder->crtc != crtc) + list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { + if (encoder->base.crtc != crtc) continue; - intel_encoder = to_intel_encoder(encoder); - switch (intel_encoder->type) { + switch (encoder->type) { case INTEL_OUTPUT_LVDS: is_lvds = true; break; case INTEL_OUTPUT_SDVO: case INTEL_OUTPUT_HDMI: is_sdvo = true; - if (intel_encoder->needs_tv_clock) + if (encoder->needs_tv_clock) is_tv = true; break; case INTEL_OUTPUT_DVO: @@ -3684,7 +3608,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, is_dp = true; break; case INTEL_OUTPUT_EDP: - has_edp_encoder = intel_encoder; + has_edp_encoder = encoder; break; } @@ -3694,7 +3618,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, if (is_lvds && dev_priv->lvds_use_ssc && num_connectors < 2) { refclk = dev_priv->lvds_ssc_freq * 1000; DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n", - refclk / 1000); + refclk / 1000); } else if (IS_I9XX(dev)) { refclk = 96000; if (HAS_PCH_SPLIT(dev)) @@ -3702,7 +3626,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } else { refclk = 48000; } - /* * Returns a set of divisors for the desired target clock with the given @@ -3722,9 +3645,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, if (is_lvds && dev_priv->lvds_downclock_avail) { has_reduced_clock = limit->find_pll(limit, crtc, - dev_priv->lvds_downclock, - refclk, - &reduced_clock); + dev_priv->lvds_downclock, + refclk, + &reduced_clock); if (has_reduced_clock && (clock.p != reduced_clock.p)) { /* * If the different P is found, it means that we can't @@ -3733,7 +3656,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, * feature. */ DRM_DEBUG_KMS("Different P is found for " - "LVDS clock/downclock\n"); + "LVDS clock/downclock\n"); has_reduced_clock = 0; } } @@ -3741,14 +3664,14 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, this mirrors vbios setting. */ if (is_sdvo && is_tv) { if (adjusted_mode->clock >= 100000 - && adjusted_mode->clock < 140500) { + && adjusted_mode->clock < 140500) { clock.p1 = 2; clock.p2 = 10; clock.n = 3; clock.m1 = 16; clock.m2 = 8; } else if (adjusted_mode->clock >= 140500 - && adjusted_mode->clock <= 200000) { + && adjusted_mode->clock <= 200000) { clock.p1 = 1; clock.p2 = 10; clock.n = 6; @@ -3785,12 +3708,11 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } /* determine panel color depth */ - temp = I915_READ(pipeconf_reg); + temp = I915_READ(PIPECONF(pipe)); temp &= ~PIPE_BPC_MASK; if (is_lvds) { - int lvds_reg = I915_READ(PCH_LVDS); /* the BPC will be 6 if it is 18-bit LVDS panel */ - if ((lvds_reg & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) + if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) temp |= PIPE_8BPC; else temp |= PIPE_6BPC; @@ -3811,8 +3733,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } } else temp |= PIPE_8BPC; - I915_WRITE(pipeconf_reg, temp); - I915_READ(pipeconf_reg); + I915_WRITE(PIPECONF(pipe), temp); switch (temp & PIPE_BPC_MASK) { case PIPE_8BPC: @@ -3857,33 +3778,27 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* Always enable nonspread source */ temp &= ~DREF_NONSPREAD_SOURCE_MASK; temp |= DREF_NONSPREAD_SOURCE_ENABLE; - I915_WRITE(PCH_DREF_CONTROL, temp); - POSTING_READ(PCH_DREF_CONTROL); - temp &= ~DREF_SSC_SOURCE_MASK; temp |= DREF_SSC_SOURCE_ENABLE; I915_WRITE(PCH_DREF_CONTROL, temp); - POSTING_READ(PCH_DREF_CONTROL); + POSTING_READ(PCH_DREF_CONTROL); udelay(200); if (has_edp_encoder) { if (dev_priv->lvds_use_ssc) { temp |= DREF_SSC1_ENABLE; I915_WRITE(PCH_DREF_CONTROL, temp); - POSTING_READ(PCH_DREF_CONTROL); + POSTING_READ(PCH_DREF_CONTROL); udelay(200); temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; - I915_WRITE(PCH_DREF_CONTROL, temp); - POSTING_READ(PCH_DREF_CONTROL); } else { temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; - I915_WRITE(PCH_DREF_CONTROL, temp); - POSTING_READ(PCH_DREF_CONTROL); } + I915_WRITE(PCH_DREF_CONTROL, temp); } } @@ -3899,6 +3814,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, reduced_clock.m2; } + dpll = 0; if (!HAS_PCH_SPLIT(dev)) dpll = DPLL_VGA_MODE_DIS; @@ -3972,7 +3888,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, dpll |= PLL_REF_INPUT_DREFCLK; /* setup pipeconf */ - pipeconf = I915_READ(pipeconf_reg); + pipeconf = I915_READ(PIPECONF(pipe)); /* Set up the display plane register */ dspcntr = DISPPLANE_GAMMA_ENABLE; @@ -3995,16 +3911,15 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, */ if (mode->clock > dev_priv->display.get_display_clock_speed(dev) * 9 / 10) - pipeconf |= PIPEACONF_DOUBLE_WIDE; + pipeconf |= PIPECONF_DOUBLE_WIDE; else - pipeconf &= ~PIPEACONF_DOUBLE_WIDE; + pipeconf &= ~PIPECONF_DOUBLE_WIDE; } dspcntr |= DISPLAY_PLANE_ENABLE; - pipeconf |= PIPEACONF_ENABLE; + pipeconf |= PIPECONF_ENABLE; dpll |= DPLL_VCO_ENABLE; - /* Disable the panel fitter if it was on our pipe */ if (!HAS_PCH_SPLIT(dev) && intel_panel_fitter_pipe(dev) == pipe) I915_WRITE(PFIT_CONTROL, 0); @@ -4014,26 +3929,31 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* assign to Ironlake registers */ if (HAS_PCH_SPLIT(dev)) { - fp_reg = pch_fp_reg; - dpll_reg = pch_dpll_reg; + fp_reg = PCH_FP0(pipe); + dpll_reg = PCH_DPLL(pipe); + } else { + fp_reg = FP0(pipe); + dpll_reg = DPLL(pipe); } if (!has_edp_encoder) { I915_WRITE(fp_reg, fp); I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE); - I915_READ(dpll_reg); + + POSTING_READ(dpll_reg); udelay(150); } /* enable transcoder DPLL */ if (HAS_PCH_CPT(dev)) { temp = I915_READ(PCH_DPLL_SEL); - if (trans_dpll_sel == 0) - temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL); + if (pipe == 0) + temp |= TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL; else - temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); + temp |= TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL; I915_WRITE(PCH_DPLL_SEL, temp); - I915_READ(PCH_DPLL_SEL); + + POSTING_READ(PCH_DPLL_SEL); udelay(150); } @@ -4042,33 +3962,32 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, * things on. */ if (is_lvds) { - u32 lvds; - + reg = LVDS; if (HAS_PCH_SPLIT(dev)) - lvds_reg = PCH_LVDS; + reg = PCH_LVDS; - lvds = I915_READ(lvds_reg); - lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; + temp = I915_READ(reg); + temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; if (pipe == 1) { if (HAS_PCH_CPT(dev)) - lvds |= PORT_TRANS_B_SEL_CPT; + temp |= PORT_TRANS_B_SEL_CPT; else - lvds |= LVDS_PIPEB_SELECT; + temp |= LVDS_PIPEB_SELECT; } else { if (HAS_PCH_CPT(dev)) - lvds &= ~PORT_TRANS_SEL_MASK; + temp &= ~PORT_TRANS_SEL_MASK; else - lvds &= ~LVDS_PIPEB_SELECT; + temp &= ~LVDS_PIPEB_SELECT; } /* set the corresponsding LVDS_BORDER bit */ - lvds |= dev_priv->lvds_border_bits; + temp |= dev_priv->lvds_border_bits; /* Set the B0-B3 data pairs corresponding to whether we're going to * set the DPLLs for dual-channel mode or not. */ if (clock.p2 == 7) - lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; else - lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) * appropriately here, but we need to look more thoroughly into how @@ -4077,12 +3996,11 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* set the dithering flag on non-PCH LVDS as needed */ if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev)) { if (dev_priv->lvds_dither) - lvds |= LVDS_ENABLE_DITHER; + temp |= LVDS_ENABLE_DITHER; else - lvds &= ~LVDS_ENABLE_DITHER; + temp &= ~LVDS_ENABLE_DITHER; } - I915_WRITE(lvds_reg, lvds); - I915_READ(lvds_reg); + I915_WRITE(reg, temp); } /* set the dithering flag and clear for anything other than a panel. */ @@ -4115,32 +4033,32 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, if (!has_edp_encoder) { I915_WRITE(fp_reg, fp); I915_WRITE(dpll_reg, dpll); - I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + POSTING_READ(dpll_reg); udelay(150); if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev)) { + temp = 0; if (is_sdvo) { - int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); - if (pixel_multiplier > 1) - pixel_multiplier = (pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; + temp = intel_mode_get_pixel_multiplier(adjusted_mode); + if (temp > 1) + temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; else - pixel_multiplier = 0; - - I915_WRITE(dpll_md_reg, - (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | - pixel_multiplier); - } else - I915_WRITE(dpll_md_reg, 0); + temp = 0; + } + I915_WRITE(DPLL_MD(pipe), temp); } else { /* write it again -- the BIOS does, after all */ I915_WRITE(dpll_reg, dpll); } - I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + POSTING_READ(dpll_reg); udelay(150); } + intel_crtc->lowfreq_avail = false; if (is_lvds && has_reduced_clock && i915_powersave) { I915_WRITE(fp_reg + 4, fp2); intel_crtc->lowfreq_avail = true; @@ -4150,7 +4068,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } } else { I915_WRITE(fp_reg + 4, fp); - intel_crtc->lowfreq_avail = false; if (HAS_PIPE_CXSR(dev)) { DRM_DEBUG_KMS("disabling CxSR downclocking\n"); pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK; @@ -4169,58 +4086,72 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } else pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */ - I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) | + I915_WRITE(HTOTAL(pipe), + (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16)); - I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | + I915_WRITE(HBLANK(pipe), + (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); - I915_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | + I915_WRITE(HSYNC(pipe), + (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); - I915_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | + + I915_WRITE(VTOTAL(pipe), + (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); - I915_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | + I915_WRITE(VBLANK(pipe), + (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); - I915_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | + I915_WRITE(VSYNC(pipe), + (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); - /* pipesrc and dspsize control the size that is scaled from, which should - * always be the user's requested size. + + /* pipesrc and dspsize control the size that is scaled from, + * which should always be the user's requested size. */ if (!HAS_PCH_SPLIT(dev)) { - I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | - (mode->hdisplay - 1)); - I915_WRITE(dsppos_reg, 0); + I915_WRITE(DSPSIZE(plane), + ((mode->vdisplay - 1) << 16) | + (mode->hdisplay - 1)); + I915_WRITE(DSPPOS(plane), 0); } - I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); + I915_WRITE(PIPESRC(pipe), + ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); if (HAS_PCH_SPLIT(dev)) { - I915_WRITE(data_m1_reg, TU_SIZE(m_n.tu) | m_n.gmch_m); - I915_WRITE(data_n1_reg, m_n.gmch_n); - I915_WRITE(link_m1_reg, m_n.link_m); - I915_WRITE(link_n1_reg, m_n.link_n); + I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m); + I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n); + I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m); + I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n); if (has_edp_encoder) { ironlake_set_pll_edp(crtc, adjusted_mode->clock); } else { /* enable FDI RX PLL too */ - temp = I915_READ(fdi_rx_reg); - I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE); - I915_READ(fdi_rx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE); + + POSTING_READ(reg); udelay(200); /* enable FDI TX PLL too */ - temp = I915_READ(fdi_tx_reg); - I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE); - I915_READ(fdi_tx_reg); + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE); /* enable FDI RX PCDCLK */ - temp = I915_READ(fdi_rx_reg); - I915_WRITE(fdi_rx_reg, temp | FDI_SEL_PCDCLK); - I915_READ(fdi_rx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp | FDI_PCDCLK); + + POSTING_READ(reg); udelay(200); } } - I915_WRITE(pipeconf_reg, pipeconf); - I915_READ(pipeconf_reg); + I915_WRITE(PIPECONF(pipe), pipeconf); + POSTING_READ(PIPECONF(pipe)); intel_wait_for_vblank(dev, pipe); @@ -4230,9 +4161,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(DISP_ARB_CTL, temp | DISP_TILE_SURFACE_SWIZZLING); } - I915_WRITE(dspcntr_reg, dspcntr); + I915_WRITE(DSPCNTR(plane), dspcntr); - /* Flush the plane changes */ ret = intel_pipe_set_base(crtc, x, y, old_fb); intel_update_watermarks(dev); diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c index 743ced7c4ae7..9dcddfc8394c 100644 --- a/drivers/gpu/drm/i915/intel_overlay.c +++ b/drivers/gpu/drm/i915/intel_overlay.c @@ -255,7 +255,7 @@ i830_activate_pipe_a(struct drm_device *dev) return 0; /* most i8xx have pipe a forced on, so don't trust dpms mode */ - if (I915_READ(PIPEACONF) & PIPEACONF_ENABLE) + if (I915_READ(PIPEACONF) & PIPECONF_ENABLE) return 0; crtc_funcs = crtc->base.helper_private; @@ -876,15 +876,14 @@ static int check_overlay_possible_on_crtc(struct intel_overlay *overlay, { drm_i915_private_t *dev_priv = overlay->dev->dev_private; u32 pipeconf; - int pipeconf_reg = (crtc->pipe == 0) ? PIPEACONF : PIPEBCONF; if (!crtc->base.enabled || crtc->dpms_mode != DRM_MODE_DPMS_ON) return -EINVAL; - pipeconf = I915_READ(pipeconf_reg); + pipeconf = I915_READ(PIPECONF(crtc->pipe)); /* can't use the overlay with double wide pipe */ - if (!IS_I965G(overlay->dev) && pipeconf & PIPEACONF_DOUBLE_WIDE) + if (!IS_I965G(overlay->dev) && pipeconf & PIPECONF_DOUBLE_WIDE) return -EINVAL; return 0; diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 267da3289263..e819cadd5f46 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1168,7 +1168,7 @@ intel_tv_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, if (!IS_I9XX(dev)) intel_wait_for_vblank(dev, intel_crtc->pipe); - I915_WRITE(pipeconf_reg, pipeconf & ~PIPEACONF_ENABLE); + I915_WRITE(pipeconf_reg, pipeconf & ~PIPECONF_ENABLE); /* Wait for vblank for the disable to take effect. */ intel_wait_for_vblank_off(dev, intel_crtc->pipe);