From: H Hartley Sweeten Date: Tue, 11 Sep 2012 23:41:36 +0000 (-0700) Subject: staging: comedi: adl_pci9118: remove forward declarations X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=5e49e5152cf10d3e5a3c699859f220a97852c687;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git staging: comedi: adl_pci9118: remove forward declarations Move some of the functions to remove the need for the forward declarations. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c index 7c8ce2cbbbe3..f3beeb8c9ee3 100644 --- a/drivers/staging/comedi/drivers/adl_pci9118.c +++ b/drivers/staging/comedi/drivers/adl_pci9118.c @@ -346,25 +346,162 @@ struct pci9118_private { static int check_channel_list(struct comedi_device *dev, struct comedi_subdevice *s, int n_chan, - unsigned int *chanlist, int frontadd, - int backadd); + unsigned int *chanlist, int frontadd, int backadd) +{ + const struct boardtype *this_board = comedi_board(dev); + struct pci9118_private *devpriv = dev->private; + unsigned int i, differencial = 0, bipolar = 0; + + /* correct channel and range number check itself comedi/range.c */ + if (n_chan < 1) { + comedi_error(dev, "range/channel list is empty!"); + return 0; + } + if ((frontadd + n_chan + backadd) > s->len_chanlist) { + printk + ("comedi%d: range/channel list is too long for " + "actual configuration (%d>%d)!", + dev->minor, n_chan, s->len_chanlist - frontadd - backadd); + return 0; + } + + if (CR_AREF(chanlist[0]) == AREF_DIFF) + differencial = 1; /* all input must be diff */ + if (CR_RANGE(chanlist[0]) < PCI9118_BIPOLAR_RANGES) + bipolar = 1; /* all input must be bipolar */ + if (n_chan > 1) + for (i = 1; i < n_chan; i++) { /* check S.E/diff */ + if ((CR_AREF(chanlist[i]) == AREF_DIFF) != + (differencial)) { + comedi_error(dev, + "Differencial and single ended " + "inputs can't be mixtured!"); + return 0; + } + if ((CR_RANGE(chanlist[i]) < PCI9118_BIPOLAR_RANGES) != + (bipolar)) { + comedi_error(dev, + "Bipolar and unipolar ranges " + "can't be mixtured!"); + return 0; + } + if (!devpriv->usemux && differencial && + (CR_CHAN(chanlist[i]) >= this_board->n_aichand)) { + comedi_error(dev, + "If AREF_DIFF is used then is " + "available only first 8 channels!"); + return 0; + } + } + + return 1; +} + static int setup_channel_list(struct comedi_device *dev, struct comedi_subdevice *s, int n_chan, unsigned int *chanlist, int rot, int frontadd, - int backadd, int usedma, char eoshandle); -static void start_pacer(struct comedi_device *dev, int mode, - unsigned int divisor1, unsigned int divisor2); -static int pci9118_reset(struct comedi_device *dev); -static int pci9118_exttrg_add(struct comedi_device *dev, unsigned char source); -static int pci9118_exttrg_del(struct comedi_device *dev, unsigned char source); -static int pci9118_ai_cancel(struct comedi_device *dev, - struct comedi_subdevice *s); -static void pci9118_calc_divisors(char mode, struct comedi_device *dev, - struct comedi_subdevice *s, - unsigned int *tim1, unsigned int *tim2, - unsigned int flags, int chans, - unsigned int *div1, unsigned int *div2, - char usessh, unsigned int chnsshfront); + int backadd, int usedma, char useeos) +{ + struct pci9118_private *devpriv = dev->private; + unsigned int i, differencial = 0, bipolar = 0; + unsigned int scanquad, gain, ssh = 0x00; + + if (usedma == 1) { + rot = 8; + usedma = 0; + } + + if (CR_AREF(chanlist[0]) == AREF_DIFF) + differencial = 1; /* all input must be diff */ + if (CR_RANGE(chanlist[0]) < PCI9118_BIPOLAR_RANGES) + bipolar = 1; /* all input must be bipolar */ + + /* All is ok, so we can setup channel/range list */ + + if (!bipolar) { + devpriv->AdControlReg |= AdControl_UniP; + /* set unibipolar */ + } else { + devpriv->AdControlReg &= ((~AdControl_UniP) & 0xff); + /* enable bipolar */ + } + + if (differencial) { + devpriv->AdControlReg |= AdControl_Diff; + /* enable diff inputs */ + } else { + devpriv->AdControlReg &= ((~AdControl_Diff) & 0xff); + /* set single ended inputs */ + } + + outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL); + /* setup mode */ + + outl(2, dev->iobase + PCI9118_SCANMOD); + /* gods know why this sequence! */ + outl(0, dev->iobase + PCI9118_SCANMOD); + outl(1, dev->iobase + PCI9118_SCANMOD); + +#ifdef PCI9118_PARANOIDCHECK + devpriv->chanlistlen = n_chan; + for (i = 0; i < (PCI9118_CHANLEN + 1); i++) + devpriv->chanlist[i] = 0x55aa; +#endif + + if (frontadd) { /* insert channels for S&H */ + ssh = devpriv->softsshsample; + for (i = 0; i < frontadd; i++) { + /* store range list to card */ + scanquad = CR_CHAN(chanlist[0]); + /* get channel number; */ + gain = CR_RANGE(chanlist[0]); + /* get gain number */ + scanquad |= ((gain & 0x03) << 8); + outl(scanquad | ssh, dev->iobase + PCI9118_GAIN); + ssh = devpriv->softsshhold; + } + } + + for (i = 0; i < n_chan; i++) { /* store range list to card */ + scanquad = CR_CHAN(chanlist[i]); /* get channel number */ +#ifdef PCI9118_PARANOIDCHECK + devpriv->chanlist[i ^ usedma] = (scanquad & 0xf) << rot; +#endif + gain = CR_RANGE(chanlist[i]); /* get gain number */ + scanquad |= ((gain & 0x03) << 8); + outl(scanquad | ssh, dev->iobase + PCI9118_GAIN); + } + + if (backadd) { /* insert channels for fit onto 32bit DMA */ + for (i = 0; i < backadd; i++) { /* store range list to card */ + scanquad = CR_CHAN(chanlist[0]); + /* get channel number */ + gain = CR_RANGE(chanlist[0]); /* get gain number */ + scanquad |= ((gain & 0x03) << 8); + outl(scanquad | ssh, dev->iobase + PCI9118_GAIN); + } + } +#ifdef PCI9118_PARANOIDCHECK + devpriv->chanlist[n_chan ^ usedma] = devpriv->chanlist[0 ^ usedma]; + /* for 32bit operations */ + if (useeos) { + for (i = 1; i < n_chan; i++) { /* store range list to card */ + devpriv->chanlist[(n_chan + i) ^ usedma] = + (CR_CHAN(chanlist[i]) & 0xf) << rot; + } + devpriv->chanlist[(2 * n_chan) ^ usedma] = + devpriv->chanlist[0 ^ usedma]; + /* for 32bit operations */ + useeos = 2; + } else { + useeos = 1; + } +#endif + outl(0, dev->iobase + PCI9118_SCANMOD); /* close scan queue */ + /* udelay(100); important delay, or first sample will be crippled */ + + return 1; /* we can serve this with scan logic */ +} static int pci9118_insn_read_ai(struct comedi_device *dev, struct comedi_subdevice *s, @@ -540,69 +677,210 @@ static int move_block_from_dma(struct comedi_device *dev, return 0; } -static char pci9118_decode_error_status(struct comedi_device *dev, - struct comedi_subdevice *s, - unsigned char m) +static int pci9118_exttrg_add(struct comedi_device *dev, unsigned char source) { struct pci9118_private *devpriv = dev->private; - if (m & 0x100) { - comedi_error(dev, "A/D FIFO Full status (Fatal Error!)"); - devpriv->ai_maskerr &= ~0x100L; - } - if (m & 0x008) { - comedi_error(dev, - "A/D Burst Mode Overrun Status (Fatal Error!)"); - devpriv->ai_maskerr &= ~0x008L; - } - if (m & 0x004) { - comedi_error(dev, "A/D Over Speed Status (Warning!)"); - devpriv->ai_maskerr &= ~0x004L; - } - if (m & 0x002) { - comedi_error(dev, "A/D Overrun Status (Fatal Error!)"); - devpriv->ai_maskerr &= ~0x002L; - } - if (m & devpriv->ai_maskharderr) { - s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA; - pci9118_ai_cancel(dev, s); - comedi_event(dev, s); - return 1; - } - + if (source > 3) + return -1; /* incorrect source */ + devpriv->exttrg_users |= (1 << source); + devpriv->IntControlReg |= Int_DTrg; + outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL); + outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | 0x1f00, + devpriv->iobase_a + AMCC_OP_REG_INTCSR); + /* allow INT in AMCC */ return 0; } -static void pci9118_ai_munge(struct comedi_device *dev, - struct comedi_subdevice *s, void *data, - unsigned int num_bytes, - unsigned int start_chan_index) +static int pci9118_exttrg_del(struct comedi_device *dev, unsigned char source) { struct pci9118_private *devpriv = dev->private; - unsigned int i, num_samples = num_bytes / sizeof(short); - short *array = data; - - for (i = 0; i < num_samples; i++) { - if (devpriv->usedma) - array[i] = be16_to_cpu(array[i]); - if (devpriv->ai16bits) - array[i] ^= 0x8000; - else - array[i] = (array[i] >> 4) & 0x0fff; + if (source > 3) + return -1; /* incorrect source */ + devpriv->exttrg_users &= ~(1 << source); + if (!devpriv->exttrg_users) { /* shutdown ext trg intterrupts */ + devpriv->IntControlReg &= ~Int_DTrg; + if (!devpriv->IntControlReg) /* all IRQ disabled */ + outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) & + (~0x00001f00), + devpriv->iobase_a + AMCC_OP_REG_INTCSR); + /* disable int in AMCC */ + outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL); } + return 0; } -static void interrupt_pci9118_ai_onesample(struct comedi_device *dev, - struct comedi_subdevice *s, - unsigned short int_adstat, - unsigned int int_amcc, - unsigned short int_daq) +static void pci9118_calc_divisors(char mode, struct comedi_device *dev, + struct comedi_subdevice *s, + unsigned int *tim1, unsigned int *tim2, + unsigned int flags, int chans, + unsigned int *div1, unsigned int *div2, + char usessh, unsigned int chnsshfront) { + const struct boardtype *this_board = comedi_board(dev); struct pci9118_private *devpriv = dev->private; - register short sampl; - s->async->events = 0; + switch (mode) { + case 1: + case 4: + if (*tim2 < this_board->ai_ns_min) + *tim2 = this_board->ai_ns_min; + i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, div1, div2, + tim2, flags & TRIG_ROUND_NEAREST); + break; + case 2: + if (*tim2 < this_board->ai_ns_min) + *tim2 = this_board->ai_ns_min; + *div1 = *tim2 / devpriv->i8254_osc_base; + /* convert timer (burst) */ + if (*div1 < this_board->ai_pacer_min) + *div1 = this_board->ai_pacer_min; + *div2 = *tim1 / devpriv->i8254_osc_base; /* scan timer */ + *div2 = *div2 / *div1; /* major timer is c1*c2 */ + if (*div2 < chans) + *div2 = chans; + + *tim2 = *div1 * devpriv->i8254_osc_base; + /* real convert timer */ + + if (usessh & (chnsshfront == 0)) /* use BSSH signal */ + if (*div2 < (chans + 2)) + *div2 = chans + 2; + + *tim1 = *div1 * *div2 * devpriv->i8254_osc_base; + break; + } +} + +static void start_pacer(struct comedi_device *dev, int mode, + unsigned int divisor1, unsigned int divisor2) +{ + outl(0x74, dev->iobase + PCI9118_CNTCTRL); + outl(0xb4, dev->iobase + PCI9118_CNTCTRL); +/* outl(0x30, dev->iobase + PCI9118_CNTCTRL); */ + udelay(1); + + if ((mode == 1) || (mode == 2) || (mode == 4)) { + outl(divisor2 & 0xff, dev->iobase + PCI9118_CNT2); + outl((divisor2 >> 8) & 0xff, dev->iobase + PCI9118_CNT2); + outl(divisor1 & 0xff, dev->iobase + PCI9118_CNT1); + outl((divisor1 >> 8) & 0xff, dev->iobase + PCI9118_CNT1); + } +} + +static int pci9118_ai_cancel(struct comedi_device *dev, + struct comedi_subdevice *s) +{ + struct pci9118_private *devpriv = dev->private; + + if (devpriv->usedma) + outl(inl(devpriv->iobase_a + AMCC_OP_REG_MCSR) & + (~EN_A2P_TRANSFERS), + devpriv->iobase_a + AMCC_OP_REG_MCSR); /* stop DMA */ + pci9118_exttrg_del(dev, EXTTRG_AI); + start_pacer(dev, 0, 0, 0); /* stop 8254 counters */ + devpriv->AdFunctionReg = AdFunction_PDTrg | AdFunction_PETrg; + outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC); + /* + * positive triggers, no S&H, no burst, + * burst stop, no post trigger, + * no about trigger, trigger stop + */ + devpriv->AdControlReg = 0x00; + outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL); + /* + * bipolar, S.E., use 8254, stop 8354, + * internal trigger, soft trigger, + * disable INT and DMA + */ + outl(0, dev->iobase + PCI9118_BURST); + outl(1, dev->iobase + PCI9118_SCANMOD); + outl(2, dev->iobase + PCI9118_SCANMOD); /* reset scan queue */ + outl(0, dev->iobase + PCI9118_DELFIFO); /* flush FIFO */ + + devpriv->ai_do = 0; + devpriv->usedma = 0; + + devpriv->ai_act_scan = 0; + devpriv->ai_act_dmapos = 0; + s->async->cur_chan = 0; + s->async->inttrig = NULL; + devpriv->ai_buf_ptr = 0; + devpriv->ai_neverending = 0; + devpriv->dma_actbuf = 0; + + if (!devpriv->IntControlReg) + outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | 0x1f00, + devpriv->iobase_a + AMCC_OP_REG_INTCSR); + /* allow INT in AMCC */ + + return 0; +} + +static char pci9118_decode_error_status(struct comedi_device *dev, + struct comedi_subdevice *s, + unsigned char m) +{ + struct pci9118_private *devpriv = dev->private; + + if (m & 0x100) { + comedi_error(dev, "A/D FIFO Full status (Fatal Error!)"); + devpriv->ai_maskerr &= ~0x100L; + } + if (m & 0x008) { + comedi_error(dev, + "A/D Burst Mode Overrun Status (Fatal Error!)"); + devpriv->ai_maskerr &= ~0x008L; + } + if (m & 0x004) { + comedi_error(dev, "A/D Over Speed Status (Warning!)"); + devpriv->ai_maskerr &= ~0x004L; + } + if (m & 0x002) { + comedi_error(dev, "A/D Overrun Status (Fatal Error!)"); + devpriv->ai_maskerr &= ~0x002L; + } + if (m & devpriv->ai_maskharderr) { + s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA; + pci9118_ai_cancel(dev, s); + comedi_event(dev, s); + return 1; + } + + return 0; +} + +static void pci9118_ai_munge(struct comedi_device *dev, + struct comedi_subdevice *s, void *data, + unsigned int num_bytes, + unsigned int start_chan_index) +{ + struct pci9118_private *devpriv = dev->private; + unsigned int i, num_samples = num_bytes / sizeof(short); + short *array = data; + + for (i = 0; i < num_samples; i++) { + if (devpriv->usedma) + array[i] = be16_to_cpu(array[i]); + if (devpriv->ai16bits) + array[i] ^= 0x8000; + else + array[i] = (array[i] >> 4) & 0x0fff; + + } +} + +static void interrupt_pci9118_ai_onesample(struct comedi_device *dev, + struct comedi_subdevice *s, + unsigned short int_adstat, + unsigned int int_amcc, + unsigned short int_daq) +{ + struct pci9118_private *devpriv = dev->private; + register short sampl; + + s->async->events = 0; if (int_adstat & devpriv->ai_maskerr) if (pci9118_decode_error_status(dev, s, int_adstat)) @@ -1581,306 +1859,6 @@ static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) return ret; } -static int check_channel_list(struct comedi_device *dev, - struct comedi_subdevice *s, int n_chan, - unsigned int *chanlist, int frontadd, int backadd) -{ - const struct boardtype *this_board = comedi_board(dev); - struct pci9118_private *devpriv = dev->private; - unsigned int i, differencial = 0, bipolar = 0; - - /* correct channel and range number check itself comedi/range.c */ - if (n_chan < 1) { - comedi_error(dev, "range/channel list is empty!"); - return 0; - } - if ((frontadd + n_chan + backadd) > s->len_chanlist) { - printk - ("comedi%d: range/channel list is too long for " - "actual configuration (%d>%d)!", - dev->minor, n_chan, s->len_chanlist - frontadd - backadd); - return 0; - } - - if (CR_AREF(chanlist[0]) == AREF_DIFF) - differencial = 1; /* all input must be diff */ - if (CR_RANGE(chanlist[0]) < PCI9118_BIPOLAR_RANGES) - bipolar = 1; /* all input must be bipolar */ - if (n_chan > 1) - for (i = 1; i < n_chan; i++) { /* check S.E/diff */ - if ((CR_AREF(chanlist[i]) == AREF_DIFF) != - (differencial)) { - comedi_error(dev, - "Differencial and single ended " - "inputs can't be mixtured!"); - return 0; - } - if ((CR_RANGE(chanlist[i]) < PCI9118_BIPOLAR_RANGES) != - (bipolar)) { - comedi_error(dev, - "Bipolar and unipolar ranges " - "can't be mixtured!"); - return 0; - } - if (!devpriv->usemux && differencial && - (CR_CHAN(chanlist[i]) >= this_board->n_aichand)) { - comedi_error(dev, - "If AREF_DIFF is used then is " - "available only first 8 channels!"); - return 0; - } - } - - return 1; -} - -static int setup_channel_list(struct comedi_device *dev, - struct comedi_subdevice *s, int n_chan, - unsigned int *chanlist, int rot, int frontadd, - int backadd, int usedma, char useeos) -{ - struct pci9118_private *devpriv = dev->private; - unsigned int i, differencial = 0, bipolar = 0; - unsigned int scanquad, gain, ssh = 0x00; - - if (usedma == 1) { - rot = 8; - usedma = 0; - } - - if (CR_AREF(chanlist[0]) == AREF_DIFF) - differencial = 1; /* all input must be diff */ - if (CR_RANGE(chanlist[0]) < PCI9118_BIPOLAR_RANGES) - bipolar = 1; /* all input must be bipolar */ - - /* All is ok, so we can setup channel/range list */ - - if (!bipolar) { - devpriv->AdControlReg |= AdControl_UniP; - /* set unibipolar */ - } else { - devpriv->AdControlReg &= ((~AdControl_UniP) & 0xff); - /* enable bipolar */ - } - - if (differencial) { - devpriv->AdControlReg |= AdControl_Diff; - /* enable diff inputs */ - } else { - devpriv->AdControlReg &= ((~AdControl_Diff) & 0xff); - /* set single ended inputs */ - } - - outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL); - /* setup mode */ - - outl(2, dev->iobase + PCI9118_SCANMOD); - /* gods know why this sequence! */ - outl(0, dev->iobase + PCI9118_SCANMOD); - outl(1, dev->iobase + PCI9118_SCANMOD); - -#ifdef PCI9118_PARANOIDCHECK - devpriv->chanlistlen = n_chan; - for (i = 0; i < (PCI9118_CHANLEN + 1); i++) - devpriv->chanlist[i] = 0x55aa; -#endif - - if (frontadd) { /* insert channels for S&H */ - ssh = devpriv->softsshsample; - for (i = 0; i < frontadd; i++) { - /* store range list to card */ - scanquad = CR_CHAN(chanlist[0]); - /* get channel number; */ - gain = CR_RANGE(chanlist[0]); - /* get gain number */ - scanquad |= ((gain & 0x03) << 8); - outl(scanquad | ssh, dev->iobase + PCI9118_GAIN); - ssh = devpriv->softsshhold; - } - } - - for (i = 0; i < n_chan; i++) { /* store range list to card */ - scanquad = CR_CHAN(chanlist[i]); /* get channel number */ -#ifdef PCI9118_PARANOIDCHECK - devpriv->chanlist[i ^ usedma] = (scanquad & 0xf) << rot; -#endif - gain = CR_RANGE(chanlist[i]); /* get gain number */ - scanquad |= ((gain & 0x03) << 8); - outl(scanquad | ssh, dev->iobase + PCI9118_GAIN); - } - - if (backadd) { /* insert channels for fit onto 32bit DMA */ - for (i = 0; i < backadd; i++) { /* store range list to card */ - scanquad = CR_CHAN(chanlist[0]); - /* get channel number */ - gain = CR_RANGE(chanlist[0]); /* get gain number */ - scanquad |= ((gain & 0x03) << 8); - outl(scanquad | ssh, dev->iobase + PCI9118_GAIN); - } - } -#ifdef PCI9118_PARANOIDCHECK - devpriv->chanlist[n_chan ^ usedma] = devpriv->chanlist[0 ^ usedma]; - /* for 32bit operations */ - if (useeos) { - for (i = 1; i < n_chan; i++) { /* store range list to card */ - devpriv->chanlist[(n_chan + i) ^ usedma] = - (CR_CHAN(chanlist[i]) & 0xf) << rot; - } - devpriv->chanlist[(2 * n_chan) ^ usedma] = - devpriv->chanlist[0 ^ usedma]; - /* for 32bit operations */ - useeos = 2; - } else { - useeos = 1; - } -#endif - outl(0, dev->iobase + PCI9118_SCANMOD); /* close scan queue */ - /* udelay(100); important delay, or first sample will be crippled */ - - return 1; /* we can serve this with scan logic */ -} - -static void pci9118_calc_divisors(char mode, struct comedi_device *dev, - struct comedi_subdevice *s, - unsigned int *tim1, unsigned int *tim2, - unsigned int flags, int chans, - unsigned int *div1, unsigned int *div2, - char usessh, unsigned int chnsshfront) -{ - const struct boardtype *this_board = comedi_board(dev); - struct pci9118_private *devpriv = dev->private; - - switch (mode) { - case 1: - case 4: - if (*tim2 < this_board->ai_ns_min) - *tim2 = this_board->ai_ns_min; - i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, div1, div2, - tim2, flags & TRIG_ROUND_NEAREST); - break; - case 2: - if (*tim2 < this_board->ai_ns_min) - *tim2 = this_board->ai_ns_min; - *div1 = *tim2 / devpriv->i8254_osc_base; - /* convert timer (burst) */ - if (*div1 < this_board->ai_pacer_min) - *div1 = this_board->ai_pacer_min; - *div2 = *tim1 / devpriv->i8254_osc_base; /* scan timer */ - *div2 = *div2 / *div1; /* major timer is c1*c2 */ - if (*div2 < chans) - *div2 = chans; - - *tim2 = *div1 * devpriv->i8254_osc_base; - /* real convert timer */ - - if (usessh & (chnsshfront == 0)) /* use BSSH signal */ - if (*div2 < (chans + 2)) - *div2 = chans + 2; - - *tim1 = *div1 * *div2 * devpriv->i8254_osc_base; - break; - } -} - -static void start_pacer(struct comedi_device *dev, int mode, - unsigned int divisor1, unsigned int divisor2) -{ - outl(0x74, dev->iobase + PCI9118_CNTCTRL); - outl(0xb4, dev->iobase + PCI9118_CNTCTRL); -/* outl(0x30, dev->iobase + PCI9118_CNTCTRL); */ - udelay(1); - - if ((mode == 1) || (mode == 2) || (mode == 4)) { - outl(divisor2 & 0xff, dev->iobase + PCI9118_CNT2); - outl((divisor2 >> 8) & 0xff, dev->iobase + PCI9118_CNT2); - outl(divisor1 & 0xff, dev->iobase + PCI9118_CNT1); - outl((divisor1 >> 8) & 0xff, dev->iobase + PCI9118_CNT1); - } -} - -static int pci9118_exttrg_add(struct comedi_device *dev, unsigned char source) -{ - struct pci9118_private *devpriv = dev->private; - - if (source > 3) - return -1; /* incorrect source */ - devpriv->exttrg_users |= (1 << source); - devpriv->IntControlReg |= Int_DTrg; - outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL); - outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | 0x1f00, - devpriv->iobase_a + AMCC_OP_REG_INTCSR); - /* allow INT in AMCC */ - return 0; -} - -static int pci9118_exttrg_del(struct comedi_device *dev, unsigned char source) -{ - struct pci9118_private *devpriv = dev->private; - - if (source > 3) - return -1; /* incorrect source */ - devpriv->exttrg_users &= ~(1 << source); - if (!devpriv->exttrg_users) { /* shutdown ext trg intterrupts */ - devpriv->IntControlReg &= ~Int_DTrg; - if (!devpriv->IntControlReg) /* all IRQ disabled */ - outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) & - (~0x00001f00), - devpriv->iobase_a + AMCC_OP_REG_INTCSR); - /* disable int in AMCC */ - outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL); - } - return 0; -} - -static int pci9118_ai_cancel(struct comedi_device *dev, - struct comedi_subdevice *s) -{ - struct pci9118_private *devpriv = dev->private; - - if (devpriv->usedma) - outl(inl(devpriv->iobase_a + AMCC_OP_REG_MCSR) & - (~EN_A2P_TRANSFERS), - devpriv->iobase_a + AMCC_OP_REG_MCSR); /* stop DMA */ - pci9118_exttrg_del(dev, EXTTRG_AI); - start_pacer(dev, 0, 0, 0); /* stop 8254 counters */ - devpriv->AdFunctionReg = AdFunction_PDTrg | AdFunction_PETrg; - outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC); - /* - * positive triggers, no S&H, no burst, - * burst stop, no post trigger, - * no about trigger, trigger stop - */ - devpriv->AdControlReg = 0x00; - outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL); - /* - * bipolar, S.E., use 8254, stop 8354, - * internal trigger, soft trigger, - * disable INT and DMA - */ - outl(0, dev->iobase + PCI9118_BURST); - outl(1, dev->iobase + PCI9118_SCANMOD); - outl(2, dev->iobase + PCI9118_SCANMOD); /* reset scan queue */ - outl(0, dev->iobase + PCI9118_DELFIFO); /* flush FIFO */ - - devpriv->ai_do = 0; - devpriv->usedma = 0; - - devpriv->ai_act_scan = 0; - devpriv->ai_act_dmapos = 0; - s->async->cur_chan = 0; - s->async->inttrig = NULL; - devpriv->ai_buf_ptr = 0; - devpriv->ai_neverending = 0; - devpriv->dma_actbuf = 0; - - if (!devpriv->IntControlReg) - outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | 0x1f00, - devpriv->iobase_a + AMCC_OP_REG_INTCSR); - /* allow INT in AMCC */ - - return 0; -} - static int pci9118_reset(struct comedi_device *dev) { struct pci9118_private *devpriv = dev->private;