From: Mykola Kostenok Date: Thu, 3 Aug 2017 08:46:50 +0000 (+0300) Subject: Documentation: dt-bindings: aspeed-pwm-tacho cooling device. X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=5e047541c1412f22d1c0950260da337ebc9bdb49;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git Documentation: dt-bindings: aspeed-pwm-tacho cooling device. It's add support for cooling device creation to aspeed-pwm-tacho. Cooling device could be bound to a thermal zone for the thermal control. Signed-off-by: Mykola Kostenok Acked-by: Rob Herring Signed-off-by: Guenter Roeck --- diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt index cf4460564adb..367c8203213b 100644 --- a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt +++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt @@ -11,6 +11,8 @@ Required properties for pwm-tacho node: - #size-cells : should be 1. +- #cooling-cells: should be 2. + - reg : address and length of the register set for the device. - pinctrl-names : a pinctrl state named "default" must be defined. @@ -28,12 +30,17 @@ fan subnode format: Under fan subnode there can upto 8 child nodes, with each child node representing a fan. If there are 8 fans each fan can have one PWM port and one/two Fan tach inputs. +For PWM port can be configured cooling-levels to create cooling device. +Cooling device could be bound to a thermal zone for the thermal control. Required properties for each child node: - reg : should specify PWM source port. integer value in the range 0 to 7 with 0 indicating PWM port A and 7 indicating PWM port H. +- cooling-levels: PWM duty cycle values in a range from 0 to 255 + which correspond to thermal cooling states. + - aspeed,fan-tach-ch : should specify the Fan tach input channel. integer value in the range 0 through 15, with 0 indicating Fan tach channel 0 and 15 indicating Fan tach channel 15. @@ -50,6 +57,7 @@ pwm_tacho_fixed_clk: fixedclk { pwm_tacho: pwmtachocontroller@1e786000 { #address-cells = <1>; #size-cells = <1>; + #cooling-cells = <2>; reg = <0x1E786000 0x1000>; compatible = "aspeed,ast2500-pwm-tacho"; clocks = <&pwm_tacho_fixed_clk>; @@ -58,6 +66,7 @@ pwm_tacho: pwmtachocontroller@1e786000 { fan@0 { reg = <0x00>; + cooling-levels = /bits/ 8 <125 151 177 203 229 255>; aspeed,fan-tach-ch = /bits/ 8 <0x00>; };