From: Cyril Chemparathy Date: Wed, 15 Sep 2010 14:11:24 +0000 (-0400) Subject: net: davinci_emac: switch to new mdio X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=5d69e0076a726588265af040b21ac3f8266856d1;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git net: davinci_emac: switch to new mdio This patch switches the emac implementation over to the newly separated MDIO driver. With this, the mdio bus frequency defaults to a safe 2.2MHz. Boards may optionally specify a bus frequency via platform data. The phy identification scheme has been modified to use a phy bus id instead of a mask. This largely serves to eliminate the "phy search" code in emac init. Signed-off-by: Cyril Chemparathy Acked-by: David S. Miller Tested-by: Michael Williamson Tested-by: Caglar Akyuz Signed-off-by: Kevin Hilman --- diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index c5c86e0e14a1..911e7f148107 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -951,6 +951,7 @@ config NET_NETX config TI_DAVINCI_EMAC tristate "TI DaVinci EMAC Support" depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) + select TI_DAVINCI_MDIO select PHYLIB help This driver supports TI's DaVinci Ethernet . diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 7fbd052ddb0a..997f5995fce1 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -500,6 +500,7 @@ struct emac_priv { u32 phy_mask; /* mii_bus,phy members */ struct mii_bus *mii_bus; + const char *phy_id; struct phy_device *phydev; spinlock_t lock; /*platform specific members*/ @@ -686,7 +687,7 @@ static int emac_get_settings(struct net_device *ndev, struct ethtool_cmd *ecmd) { struct emac_priv *priv = netdev_priv(ndev); - if (priv->phy_mask) + if (priv->phydev) return phy_ethtool_gset(priv->phydev, ecmd); else return -EOPNOTSUPP; @@ -704,7 +705,7 @@ static int emac_get_settings(struct net_device *ndev, static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *ecmd) { struct emac_priv *priv = netdev_priv(ndev); - if (priv->phy_mask) + if (priv->phydev) return phy_ethtool_sset(priv->phydev, ecmd); else return -EOPNOTSUPP; @@ -841,7 +842,7 @@ static void emac_update_phystatus(struct emac_priv *priv) mac_control = emac_read(EMAC_MACCONTROL); cur_duplex = (mac_control & EMAC_MACCONTROL_FULLDUPLEXEN) ? DUPLEX_FULL : DUPLEX_HALF; - if (priv->phy_mask) + if (priv->phydev) new_duplex = priv->phydev->duplex; else new_duplex = DUPLEX_FULL; @@ -2485,6 +2486,11 @@ static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd) return -EOPNOTSUPP; } +static int match_first_device(struct device *dev, void *data) +{ + return 1; +} + /** * emac_dev_open: EMAC device open * @ndev: The DaVinci EMAC network adapter @@ -2499,7 +2505,6 @@ static int emac_dev_open(struct net_device *ndev) { struct device *emac_dev = &ndev->dev; u32 rc, cnt, ch; - int phy_addr; struct resource *res; int q, m; int i = 0; @@ -2560,28 +2565,26 @@ static int emac_dev_open(struct net_device *ndev) emac_set_coalesce(ndev, &coal); } - /* find the first phy */ priv->phydev = NULL; - if (priv->phy_mask) { - emac_mii_reset(priv->mii_bus); - for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { - if (priv->mii_bus->phy_map[phy_addr]) { - priv->phydev = priv->mii_bus->phy_map[phy_addr]; - break; - } - } + /* use the first phy on the bus if pdata did not give us a phy id */ + if (!priv->phy_id) { + struct device *phy; - if (!priv->phydev) { - printk(KERN_ERR "%s: no PHY found\n", ndev->name); - return -1; - } + phy = bus_find_device(&mdio_bus_type, NULL, NULL, + match_first_device); + if (phy) + priv->phy_id = dev_name(phy); + } - priv->phydev = phy_connect(ndev, dev_name(&priv->phydev->dev), - &emac_adjust_link, 0, PHY_INTERFACE_MODE_MII); + if (priv->phy_id && *priv->phy_id) { + priv->phydev = phy_connect(ndev, priv->phy_id, + &emac_adjust_link, 0, + PHY_INTERFACE_MODE_MII); if (IS_ERR(priv->phydev)) { - printk(KERN_ERR "%s: Could not attach to PHY\n", - ndev->name); + dev_err(emac_dev, "could not connect to phy %s\n", + priv->phy_id); + priv->phydev = NULL; return PTR_ERR(priv->phydev); } @@ -2589,12 +2592,13 @@ static int emac_dev_open(struct net_device *ndev) priv->speed = 0; priv->duplex = ~0; - printk(KERN_INFO "%s: attached PHY driver [%s] " - "(mii_bus:phy_addr=%s, id=%x)\n", ndev->name, + dev_info(emac_dev, "attached PHY driver [%s] " + "(mii_bus:phy_addr=%s, id=%x)\n", priv->phydev->drv->name, dev_name(&priv->phydev->dev), priv->phydev->phy_id); - } else{ + } else { /* No PHY , fix the link, speed and duplex settings */ + dev_notice(emac_dev, "no phy, defaulting to 100/full\n"); priv->link = 1; priv->speed = SPEED_100; priv->duplex = DUPLEX_FULL; @@ -2607,7 +2611,7 @@ static int emac_dev_open(struct net_device *ndev) if (netif_msg_drv(priv)) dev_notice(emac_dev, "DaVinci EMAC: Opened %s\n", ndev->name); - if (priv->phy_mask) + if (priv->phydev) phy_start(priv->phydev); return 0; @@ -2794,7 +2798,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) /* MAC addr and PHY mask , RMII enable info from platform_data */ memcpy(priv->mac_addr, pdata->mac_addr, 6); - priv->phy_mask = pdata->phy_mask; + priv->phy_id = pdata->phy_id; priv->rmii_en = pdata->rmii_en; priv->version = pdata->version; priv->int_enable = pdata->interrupt_enable; @@ -2871,32 +2875,6 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) } - /* MII/Phy intialisation, mdio bus registration */ - emac_mii = mdiobus_alloc(); - if (emac_mii == NULL) { - dev_err(emac_dev, "DaVinci EMAC: Error allocating mii_bus\n"); - rc = -ENOMEM; - goto mdio_alloc_err; - } - - priv->mii_bus = emac_mii; - emac_mii->name = "emac-mii", - emac_mii->read = emac_mii_read, - emac_mii->write = emac_mii_write, - emac_mii->reset = emac_mii_reset, - emac_mii->irq = mii_irqs, - emac_mii->phy_mask = ~(priv->phy_mask); - emac_mii->parent = &pdev->dev; - emac_mii->priv = priv->remap_addr + pdata->mdio_reg_offset; - snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", priv->pdev->id); - mdio_max_freq = pdata->mdio_max_freq; - emac_mii->reset(emac_mii); - - /* Register the MII bus */ - rc = mdiobus_register(emac_mii); - if (rc) - goto mdiobus_quit; - if (netif_msg_probe(priv)) { dev_notice(emac_dev, "DaVinci EMAC Probe found device "\ "(regs: %p, irq: %d)\n", @@ -2904,11 +2882,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) } return 0; -mdiobus_quit: - mdiobus_free(emac_mii); - netdev_reg_err: -mdio_alloc_err: clk_disable(emac_clk); no_irq_res: res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -2938,8 +2912,6 @@ static int __devexit davinci_emac_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - mdiobus_unregister(priv->mii_bus); - mdiobus_free(priv->mii_bus); release_mem_region(res->start, res->end - res->start + 1); diff --git a/include/linux/davinci_emac.h b/include/linux/davinci_emac.h index a04fd8c9fbdf..46a759f0c082 100644 --- a/include/linux/davinci_emac.h +++ b/include/linux/davinci_emac.h @@ -28,6 +28,15 @@ struct emac_platform_data { u32 ctrl_ram_size; u32 phy_mask; u32 mdio_max_freq; + + /* + * phy_id can be one of the following: + * - NULL : use the first phy on the bus, + * - "" : force to 100/full, no mdio control + * - ":" : use the specified bus and phy + */ + const char *phy_id; + u8 rmii_en; u8 version; void (*interrupt_enable) (void);