From: Huang, Xiong Date: Tue, 17 Apr 2012 19:32:36 +0000 (+0000) Subject: atl1c: restore max-read-request-size in Device Conrol Register X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=59e26eff48745287d648ed4606fe2cc66a75991f;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git atl1c: restore max-read-request-size in Device Conrol Register in some platforms, we found the max-read-request-size in Device Control Register is set to 0 by (BIOS?) during bootup, this will cause the performance(throughput) very bad. Restore it to a min-value. register definition of REG_DEVICE_CTRL is removed, using kernel API to access it as it's a standard pcie register. Signed-off-by: xiong Tested-by: Liu David Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h index a0b56efa5f64..a37c82f14bb2 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h @@ -54,11 +54,7 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw); #define DEVICE_CAP_MAX_PAYLOAD_MASK 0x7 #define DEVICE_CAP_MAX_PAYLOAD_SHIFT 0 -#define REG_DEVICE_CTRL 0x60 -#define DEVICE_CTRL_MAX_PAYLOAD_MASK 0x7 -#define DEVICE_CTRL_MAX_PAYLOAD_SHIFT 5 -#define DEVICE_CTRL_MAX_RREQ_SZ_MASK 0x7 -#define DEVICE_CTRL_MAX_RREQ_SZ_SHIFT 12 +#define DEVICE_CTRL_MAXRRS_MIN 2 #define REG_LINK_CTRL 0x68 #define LINK_CTRL_L0S_EN 0x01 diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 2458e4c8b8d9..02754ac13068 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -1045,19 +1045,23 @@ static void atl1c_configure_des_ring(struct atl1c_adapter *adapter) static void atl1c_configure_tx(struct atl1c_adapter *adapter) { struct atl1c_hw *hw = &adapter->hw; - u32 dev_ctrl_data; - u32 max_pay_load; + int max_pay_load; u16 tx_offload_thresh; u32 txq_ctrl_data; tx_offload_thresh = MAX_TX_OFFLOAD_THRESH; AT_WRITE_REG(hw, REG_TX_TSO_OFFLOAD_THRESH, (tx_offload_thresh >> 3) & TX_TSO_OFFLOAD_THRESH_MASK); - AT_READ_REG(hw, REG_DEVICE_CTRL, &dev_ctrl_data); - max_pay_load = (dev_ctrl_data >> DEVICE_CTRL_MAX_RREQ_SZ_SHIFT) & - DEVICE_CTRL_MAX_RREQ_SZ_MASK; + max_pay_load = pcie_get_readrq(adapter->pdev) >> 8; hw->dmar_block = min_t(u32, max_pay_load, hw->dmar_block); - + /* + * if BIOS had changed the dam-read-max-length to an invalid value, + * restore it to default value + */ + if (hw->dmar_block < DEVICE_CTRL_MAXRRS_MIN) { + pcie_set_readrq(adapter->pdev, 128 << DEVICE_CTRL_MAXRRS_MIN); + hw->dmar_block = DEVICE_CTRL_MAXRRS_MIN; + } txq_ctrl_data = hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2 ? L2CB_TXQ_CFGV : L1C_TXQ_CFGV;