From: Dennis Menschel <menschel-d@posteo.de>
Date: Wed, 21 Oct 2015 21:16:53 +0000 (+0200)
Subject: staging: fbtft: use MIPI DCS for ST7789V and C-Berry28
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=598af18afc6dd5753622b8e4c9a6cd185f4223a4;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git

staging: fbtft: use MIPI DCS for ST7789V and C-Berry28

This patch makes use of the standard MIPI Display Command Set to remove
redundant entries from the command enum of the ST7789V display controller
and also some of the magic constants found in the init sequence of the
C-Berry28 display.

Signed-off-by: Dennis Menschel <menschel-d@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/fbtft/fb_st7789v.c b/drivers/staging/fbtft/fb_st7789v.c
index dc7d304fccc6..22a7b5b2219f 100644
--- a/drivers/staging/fbtft/fb_st7789v.c
+++ b/drivers/staging/fbtft/fb_st7789v.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -30,14 +31,6 @@
 /**
  * enum st7789v_command - ST7789V display controller commands
  *
- * @SLPOUT: sleep out
- * @DISPOFF: display off
- * @DISPON: display on
- * @CASET: column address set
- * @RASET: row address set
- * @RAMRW: memory write
- * @MADCTL: memory data access control
- * @COLMOD: interface pixel format
  * @PORCTRL: porch setting
  * @GCTRL: gate control
  * @VCOMS: VCOM setting
@@ -54,16 +47,10 @@
  *
  * Note that the ST7789V display controller offers quite a few more commands
  * which have been omitted from this list as they are not used at the moment.
+ * Furthermore, commands that are compliant with the MIPI DCS have been left
+ * out as well to avoid duplicate entries.
  */
 enum st7789v_command {
-	SLPOUT = 0x11,
-	DISPOFF = 0x28,
-	DISPON = 0x29,
-	CASET = 0x2A,
-	RASET = 0x2B,
-	RAMRW = 0x2C,
-	MADCTL = 0x36,
-	COLMOD = 0x3A,
 	PORCTRL = 0xB2,
 	GCTRL = 0xB7,
 	VCOMS = 0xBB,
@@ -93,11 +80,11 @@ enum st7789v_command {
  */
 static int default_init_sequence[] = {
 	/* turn off sleep mode */
-	-1, SLPOUT,
+	-1, MIPI_DCS_EXIT_SLEEP_MODE,
 	-2, 120,
 
 	/* set pixel format to RGB-565 */
-	-1, COLMOD, 0x05,
+	-1, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT,
 
 	-1, PORCTRL, 0x08, 0x08, 0x00, 0x22, 0x22,
 
@@ -135,7 +122,7 @@ static int default_init_sequence[] = {
 	 */
 	-1, PWCTRL1, 0xA4, 0xA1,
 
-	-1, DISPON,
+	-1, MIPI_DCS_SET_DISPLAY_ON,
 
 	-3,
 };
@@ -151,9 +138,11 @@ static int default_init_sequence[] = {
  */
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	write_reg(par, CASET, xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
-	write_reg(par, RASET, ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
-	write_reg(par, RAMRW);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 /**
@@ -184,7 +173,7 @@ static int set_var(struct fbtft_par *par)
 	default:
 		return -EINVAL;
 	}
-	write_reg(par, MADCTL, madctl_par);
+	write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, madctl_par);
 	return 0;
 }
 
@@ -256,9 +245,9 @@ static int set_gamma(struct fbtft_par *par, unsigned long *curves)
 static int blank(struct fbtft_par *par, bool on)
 {
 	if (on)
-		write_reg(par, DISPOFF);
+		write_reg(par, MIPI_DCS_SET_DISPLAY_OFF);
 	else
-		write_reg(par, DISPON);
+		write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
 	return 0;
 }
 
diff --git a/drivers/staging/fbtft/fbtft_device.c b/drivers/staging/fbtft/fbtft_device.c
index 0e501d093251..d7475d7e8438 100644
--- a/drivers/staging/fbtft/fbtft_device.c
+++ b/drivers/staging/fbtft/fbtft_device.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -132,11 +133,11 @@ static void adafruit18_green_tab_set_addr_win(struct fbtft_par *par,
 
 static int cberry28_init_sequence[] = {
 	/* turn off sleep mode */
-	-1, 0x11,
+	-1, MIPI_DCS_EXIT_SLEEP_MODE,
 	-2, 120,
 
 	/* set pixel format to RGB-565 */
-	-1, 0x3A, 0x05,
+	-1, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT,
 
 	-1, 0xB2, 0x0C, 0x0C, 0x00, 0x33, 0x33,
 
@@ -174,7 +175,7 @@ static int cberry28_init_sequence[] = {
 	 */
 	-1, 0xD0, 0xA4, 0x61,
 
-	-1, 0x29,
+	-1, MIPI_DCS_SET_DISPLAY_ON,
 
 	-3,
 };