From: Heiko Carstens Date: Wed, 9 May 2012 14:27:38 +0000 (+0200) Subject: s390/ipl: remove builtin tape ipl code X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=58770be6cc5901bfbb908d9c6d8ca679fc55df26;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git s390/ipl: remove builtin tape ipl code Remove the builtin tape ipl code. If somebody really wants to create a tape which can be ipl'ed from, then this can be achieved by using zipl. zipl can write an ipl record to a tape device and aftwards the kernel image must be written to tape. The steps are described in the "Linux on System z - Device Drivers, Features, and Commands" book (SC33-8411). Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index eeaed9be5fda..354c0fe72ae3 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -406,33 +406,6 @@ config CHSC_SCH comment "Misc" -config IPL - def_bool y - prompt "Builtin IPL record support" - help - If you want to use the produced kernel to IPL directly from a - device, you have to merge a bootsector specific to the device - into the first bytes of the kernel. You will have to select the - IPL device. - -choice - prompt "IPL method generated into head.S" - depends on IPL - default IPL_VM - help - Select "tape" if you want to IPL the image from a Tape. - - Select "vm_reader" if you are running under VM/ESA and want - to IPL the image from the emulated card reader. - -config IPL_TAPE - bool "tape" - -config IPL_VM - bool "vm_reader" - -endchoice - source "fs/Kconfig.binfmt" config FORCE_MAX_ZONEORDER diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index adccd908ebc7..4939d15375aa 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -34,125 +34,7 @@ #endif __HEAD -#ifndef CONFIG_IPL - .org 0 - .long 0x00080000,0x80000000+startup # Just a restart PSW -#else -#ifdef CONFIG_IPL_TAPE -#define IPL_BS 1024 - .org 0 - .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded - .long 0x27000000,0x60000001 # by ipl to addresses 0-23. - .long 0x02000000,0x20000000+IPL_BS # (a PSW and two CCWs). - .long 0x00000000,0x00000000 # external old psw - .long 0x00000000,0x00000000 # svc old psw - .long 0x00000000,0x00000000 # program check old psw - .long 0x00000000,0x00000000 # machine check old psw - .long 0x00000000,0x00000000 # io old psw - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x000a0000,0x00000058 # external new psw - .long 0x000a0000,0x00000060 # svc new psw - .long 0x000a0000,0x00000068 # program check new psw - .long 0x000a0000,0x00000070 # machine check new psw - .long 0x00080000,0x80000000+.Lioint # io new psw - .org 0x100 -# -# subroutine for loading from tape -# Parameters: -# R1 = device number -# R2 = load address -.Lloader: - st %r14,.Lldret - la %r3,.Lorbread # r3 = address of orb - la %r5,.Lirb # r5 = address of irb - st %r2,.Lccwread+4 # initialize CCW data addresses - lctl %c6,%c6,.Lcr6 - slr %r2,%r2 -.Lldlp: - la %r6,3 # 3 retries -.Lssch: - ssch 0(%r3) # load chunk of IPL_BS bytes - bnz .Llderr -.Lw4end: - bas %r14,.Lwait4io - tm 8(%r5),0x82 # do we have a problem ? - bnz .Lrecov - slr %r7,%r7 - icm %r7,3,10(%r5) # get residual count - lcr %r7,%r7 - la %r7,IPL_BS(%r7) # IPL_BS-residual=#bytes read - ar %r2,%r7 # add to total size - tm 8(%r5),0x01 # found a tape mark ? - bnz .Ldone - l %r0,.Lccwread+4 # update CCW data addresses - ar %r0,%r7 - st %r0,.Lccwread+4 - b .Lldlp -.Ldone: - l %r14,.Lldret - br %r14 # r2 contains the total size -.Lrecov: - bas %r14,.Lsense # do the sensing - bct %r6,.Lssch # dec. retry count & branch - b .Llderr -# -# Sense subroutine -# -.Lsense: - st %r14,.Lsnsret - la %r7,.Lorbsense - ssch 0(%r7) # start sense command - bnz .Llderr - bas %r14,.Lwait4io - l %r14,.Lsnsret - tm 8(%r5),0x82 # do we have a problem ? - bnz .Llderr - br %r14 -# -# Wait for interrupt subroutine -# -.Lwait4io: - lpsw .Lwaitpsw -.Lioint: - c %r1,0xb8 # compare subchannel number - bne .Lwait4io - tsch 0(%r5) - slr %r0,%r0 - tm 8(%r5),0x82 # do we have a problem ? - bnz .Lwtexit - tm 8(%r5),0x04 # got device end ? - bz .Lwait4io -.Lwtexit: - br %r14 -.Llderr: - lpsw .Lcrash - - .align 8 -.Lorbread: - .long 0x00000000,0x0080ff00,.Lccwread - .align 8 -.Lorbsense: - .long 0x00000000,0x0080ff00,.Lccwsense - .align 8 -.Lccwread: - .long 0x02200000+IPL_BS,0x00000000 -.Lccwsense: - .long 0x04200001,0x00000000 -.Lwaitpsw: - .long 0x020a0000,0x80000000+.Lioint - -.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -.Lcr6: .long 0xff000000 - .align 8 -.Lcrash:.long 0x000a0000,0x00000000 -.Lldret:.long 0 -.Lsnsret: .long 0 -#endif /* CONFIG_IPL_TAPE */ - -#ifdef CONFIG_IPL_VM #define IPL_BS 0x730 .org 0 .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded @@ -256,7 +138,6 @@ __HEAD .long 0x02600050,0x00000000 .endr .long 0x02200050,0x00000000 -#endif /* CONFIG_IPL_VM */ iplstart: lh %r1,0xb8 # test if subchannel number @@ -325,7 +206,6 @@ iplstart: clc 0(3,%r2),.L_eof bz .Lagain2 -#ifdef CONFIG_IPL_VM # # reset files in VM reader # @@ -358,7 +238,6 @@ iplstart: .long 0x00080000,0x80000000+.Lrdrint .Lrdrwaitpsw: .long 0x020a0000,0x80000000+.Lrdrint -#endif # # everything loaded, go for it @@ -376,8 +255,6 @@ iplstart: .L_eof: .long 0xc5d6c600 /* C'EOF' */ .L_hdr: .long 0xc8c4d900 /* C'HDR' */ -#endif /* CONFIG_IPL */ - # # SALIPL loader support. Based on a patch by Rob van der Heij. # This entry point is called directly from the SALIPL loader and