From: Gábor Stefanik Date: Tue, 18 Aug 2009 20:08:31 +0000 (+0200) Subject: b43: LP-PHY: Two small spec updates X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=5791ce18aa660df7d1dafebf6bd89d5aa05bd742;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git b43: LP-PHY: Two small spec updates The specs are beginning to support rev3 LP-PHYs - implement one of the changes needed for rev3 support. Also, in the new MIPS driver, the "Japan TX filter" was renamed to "analog TX filter init" - however, calling it "init" is confusing, so name it "set analog filter", with a comment for easier future identification. Signed-off-by: Gábor Stefanik Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c index 940238385680..37ba1777667f 100644 --- a/drivers/net/wireless/b43/phy_lp.c +++ b/drivers/net/wireless/b43/phy_lp.c @@ -609,9 +609,14 @@ static void lpphy_2063_init(struct b43_wldev *dev) b43_radio_write(dev, B2063_PA_SP7, 0); b43_radio_write(dev, B2063_TX_RF_SP6, 0x20); b43_radio_write(dev, B2063_TX_RF_SP9, 0x40); - b43_radio_write(dev, B2063_PA_SP3, 0xa0); - b43_radio_write(dev, B2063_PA_SP4, 0xa0); - b43_radio_write(dev, B2063_PA_SP2, 0x18); + if (dev->phy.rev == 2) { + b43_radio_write(dev, B2063_PA_SP3, 0xa0); + b43_radio_write(dev, B2063_PA_SP4, 0xa0); + b43_radio_write(dev, B2063_PA_SP2, 0x18); + } else { + b43_radio_write(dev, B2063_PA_SP3, 0x20); + b43_radio_write(dev, B2063_PA_SP2, 0x20); + } } struct lpphy_stx_table_entry { @@ -1972,7 +1977,9 @@ static int lpphy_b2062_tune(struct b43_wldev *dev, return err; } -static void lpphy_japan_filter(struct b43_wldev *dev, int channel) + +/* This was previously called lpphy_japan_filter */ +static void lpphy_set_analog_filter(struct b43_wldev *dev, int channel) { struct b43_phy_lp *lpphy = dev->phy.lp; u16 tmp = (channel == 14); //SPEC FIXME check japanwidefilter! @@ -2141,7 +2148,7 @@ static int b43_lpphy_op_switch_channel(struct b43_wldev *dev, err = lpphy_b2062_tune(dev, new_channel); if (err) return err; - lpphy_japan_filter(dev, new_channel); + lpphy_set_analog_filter(dev, new_channel); lpphy_adjust_gain_table(dev, channel2freq_lp(new_channel)); }