From: Dean Luick Date: Sat, 5 Mar 2016 16:50:01 +0000 (-0800) Subject: IB/hfi1: Change SBus handling to use resource reservation X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=576531fde8473333322905ea09fd5cfd14ce91ef;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git IB/hfi1: Change SBus handling to use resource reservation The SBus resource includes SBUS, PCIE, and THERM registers. Change SBus handling to use the new ASIC resource reservation system. Reviewed-by: Mitko Haralanov Reviewed-by: Easwar Hariharan Signed-off-by: Dean Luick Signed-off-by: Jubin John Signed-off-by: Doug Ledford --- diff --git a/drivers/staging/rdma/hfi1/chip.c b/drivers/staging/rdma/hfi1/chip.c index 98ebee4aac22..269c9775f7c6 100644 --- a/drivers/staging/rdma/hfi1/chip.c +++ b/drivers/staging/rdma/hfi1/chip.c @@ -14324,7 +14324,12 @@ static int thermal_init(struct hfi1_devdata *dd) !(dd->flags & HFI1_DO_INIT_ASIC)) return ret; - acquire_hw_mutex(dd); + ret = acquire_chip_resource(dd, CR_SBUS, SBUS_TIMEOUT); + if (ret) { + THERM_FAILURE(dd, ret, "Acquire SBus"); + return ret; + } + dd_dev_info(dd, "Initializing thermal sensor\n"); /* Disable polling of thermal readings */ write_csr(dd, ASIC_CFG_THERM_POLL_EN, 0x0); @@ -14372,7 +14377,7 @@ static int thermal_init(struct hfi1_devdata *dd) /* Enable polling of thermal readings */ write_csr(dd, ASIC_CFG_THERM_POLL_EN, 0x1); done: - release_hw_mutex(dd); + release_chip_resource(dd, CR_SBUS); return ret; } diff --git a/drivers/staging/rdma/hfi1/chip.h b/drivers/staging/rdma/hfi1/chip.h index dc684bc11d27..311e6e843399 100644 --- a/drivers/staging/rdma/hfi1/chip.h +++ b/drivers/staging/rdma/hfi1/chip.h @@ -669,6 +669,9 @@ bool check_chip_resource(struct hfi1_devdata *dd, u32 resource, void init_chip_resources(struct hfi1_devdata *dd); void finish_chip_resources(struct hfi1_devdata *dd); +/* ms wait time for access to an SBus resoure */ +#define SBUS_TIMEOUT 4000 /* long enough for a FW download and SBR */ + void fabric_serdes_reset(struct hfi1_devdata *dd); int read_8051_data(struct hfi1_devdata *dd, u32 addr, u32 len, u64 *result); diff --git a/drivers/staging/rdma/hfi1/firmware.c b/drivers/staging/rdma/hfi1/firmware.c index 140dd8646cd0..1ea1ad84c784 100644 --- a/drivers/staging/rdma/hfi1/firmware.c +++ b/drivers/staging/rdma/hfi1/firmware.c @@ -1125,15 +1125,23 @@ static void turn_off_spicos(struct hfi1_devdata *dd, int flags) */ void fabric_serdes_reset(struct hfi1_devdata *dd) { + int ret; + if (!fw_fabric_serdes_load) return; + ret = acquire_chip_resource(dd, CR_SBUS, SBUS_TIMEOUT); + if (ret) { + dd_dev_err(dd, + "Cannot acquire SBus resource to reset fabric SerDes - perhaps you should reboot\n"); + return; + } + set_sbus_fast_mode(dd); + if (is_ax(dd)) { /* A0 serdes do not work with a re-download */ u8 ra = fabric_serdes_broadcast[dd->hfi1_id]; - acquire_hw_mutex(dd); - set_sbus_fast_mode(dd); /* place SerDes in reset and disable SPICO */ sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000011); /* wait 100 refclk cycles @ 156.25MHz => 640ns */ @@ -1142,26 +1150,20 @@ void fabric_serdes_reset(struct hfi1_devdata *dd) sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000010); /* turn SPICO enable on */ sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000002); - clear_sbus_fast_mode(dd); - release_hw_mutex(dd); - return; + } else { + turn_off_spicos(dd, SPICO_FABRIC); + /* + * No need for firmware retry - what to download has already + * been decided. + * No need to pay attention to the load return - the only + * failure is a validation failure, which has already been + * checked by the initial download. + */ + (void)load_fabric_serdes_firmware(dd, &fw_fabric); } - acquire_hw_mutex(dd); - set_sbus_fast_mode(dd); - - turn_off_spicos(dd, SPICO_FABRIC); - /* - * No need for firmware retry - what to download has already been - * decided. - * No need to pay attention to the load return - the only failure - * is a validation failure, which has already been checked by the - * initial download. - */ - (void)load_fabric_serdes_firmware(dd, &fw_fabric); - clear_sbus_fast_mode(dd); - release_hw_mutex(dd); + release_chip_resource(dd, CR_SBUS); } /* Access to the SBus in this routine should probably be serialized */ @@ -1598,7 +1600,7 @@ int load_firmware(struct hfi1_devdata *dd) int ret; if (fw_fabric_serdes_load) { - ret = acquire_hw_mutex(dd); + ret = acquire_chip_resource(dd, CR_SBUS, SBUS_TIMEOUT); if (ret) return ret; @@ -1614,7 +1616,7 @@ int load_firmware(struct hfi1_devdata *dd) } while (retry_firmware(dd, ret)); clear_sbus_fast_mode(dd); - release_hw_mutex(dd); + release_chip_resource(dd, CR_SBUS); if (ret) return ret; } @@ -1995,7 +1997,7 @@ int get_platform_config_field(struct hfi1_devdata *dd, * Download the firmware needed for the Gen3 PCIe SerDes. An update * to the SBus firmware is needed before updating the PCIe firmware. * - * Note: caller must be holding the HW mutex. + * Note: caller must be holding the SBus resource. */ int load_pcie_firmware(struct hfi1_devdata *dd) { diff --git a/drivers/staging/rdma/hfi1/pcie.c b/drivers/staging/rdma/hfi1/pcie.c index 1adfa8bfaf2b..42a409f16449 100644 --- a/drivers/staging/rdma/hfi1/pcie.c +++ b/drivers/staging/rdma/hfi1/pcie.c @@ -773,7 +773,7 @@ static int load_eq_table(struct hfi1_devdata *dd, const u8 eq[11][3], u8 fs, /* * Steps to be done after the PCIe firmware is downloaded and * before the SBR for the Pcie Gen3. - * The hardware mutex is already being held. + * The SBus resource is already being held. */ static void pcie_post_steps(struct hfi1_devdata *dd) { @@ -1012,10 +1012,13 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd) goto done_no_mutex; } - /* hold the HW mutex across the firmware download and SBR */ - ret = acquire_hw_mutex(dd); - if (ret) + /* hold the SBus resource across the firmware download and SBR */ + ret = acquire_chip_resource(dd, CR_SBUS, SBUS_TIMEOUT); + if (ret) { + dd_dev_err(dd, "%s: unable to acquire SBus resource\n", + __func__); return ret; + } /* make sure thermal polling is not causing interrupts */ therm = read_csr(dd, ASIC_CFG_THERM_POLL_EN); @@ -1324,7 +1327,7 @@ done: dd_dev_info(dd, "%s: Re-enable therm polling\n", __func__); } - release_hw_mutex(dd); + release_chip_resource(dd, CR_SBUS); done_no_mutex: /* return no error if it is OK to be at current speed */ if (ret && !return_error) {