From: Florian Fainelli Date: Wed, 28 Dec 2016 02:23:06 +0000 (-0800) Subject: net: stmmac: Fix race between stmmac_drv_probe and stmmac_open X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=5701659004d68085182d2fd4199c79172165fa65;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git net: stmmac: Fix race between stmmac_drv_probe and stmmac_open There is currently a small window during which the network device registered by stmmac can be made visible, yet all resources, including and clock and MDIO bus have not had a chance to be set up, this can lead to the following error to occur: [ 473.919358] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): stmmac_dvr_probe: warning: cannot get CSR clock [ 473.919382] stmmaceth 0000:01:00.0: no reset control found [ 473.919412] stmmac - user ID: 0x10, Synopsys ID: 0x42 [ 473.919429] stmmaceth 0000:01:00.0: DMA HW capability register supported [ 473.919436] stmmaceth 0000:01:00.0: RX Checksum Offload Engine supported [ 473.919443] stmmaceth 0000:01:00.0: TX Checksum insertion supported [ 473.919451] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer [ 473.921395] libphy: PHY stmmac-1:00 not found [ 473.921417] stmmaceth 0000:01:00.0 eth0: Could not attach to PHY [ 473.921427] stmmaceth 0000:01:00.0 eth0: stmmac_open: Cannot attach to PHY (error: -19) [ 473.959710] libphy: stmmac: probed [ 473.959724] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 0 IRQ POLL (stmmac-1:00) active [ 473.959728] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 1 IRQ POLL (stmmac-1:01) [ 473.959731] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 2 IRQ POLL (stmmac-1:02) [ 473.959734] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 3 IRQ POLL (stmmac-1:03) Fix this by making sure that register_netdev() is the last thing being done, which guarantees that the clock and the MDIO bus are available. Fixes: 4bfcbd7abce2 ("stmmac: Move the mdio_register/_unregister in probe/remove") Reported-by: Kweh, Hock Leong Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index bb40382e205d..5910ea51f8f6 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3339,13 +3339,6 @@ int stmmac_dvr_probe(struct device *device, spin_lock_init(&priv->lock); - ret = register_netdev(ndev); - if (ret) { - netdev_err(priv->dev, "%s: ERROR %i registering the device\n", - __func__, ret); - goto error_netdev_register; - } - /* If a specific clk_csr value is passed from the platform * this means that the CSR Clock Range selection cannot be * changed at run-time and it is fixed. Viceversa the driver'll try to @@ -3372,11 +3365,14 @@ int stmmac_dvr_probe(struct device *device, } } - return 0; + ret = register_netdev(ndev); + if (ret) + netdev_err(priv->dev, "%s: ERROR %i registering the device\n", + __func__, ret); + + return ret; error_mdio_register: - unregister_netdev(ndev); -error_netdev_register: netif_napi_del(&priv->napi); error_hw_init: clk_disable_unprepare(priv->pclk);