From: Chanwoo Choi Date: Wed, 3 Sep 2014 03:09:02 +0000 (+0900) Subject: thermal: exynos: Add support for many TRIMINFO_CTRL registers X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=56c64da7aa31c7e0422ec54e5d0ed60a98f28712;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git thermal: exynos: Add support for many TRIMINFO_CTRL registers This patch support many TRIMINFO_CTRL registers if specific Exynos SoC has one more TRIMINFO_CTRL registers. Also this patch uses proper 'RELOAD' shift/mask bit operation to set RELOAD feature instead of static value. Signed-off-by: Chanwoo Choi Acked-by: Kyungmin Park Cc: Zhang Rui Cc: Eduardo Valentin Cc: Amit Daniel Kachhap Reviewed-by: Amit Daniel Kachhap Signed-off-by: Eduardo Valentin --- diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h index cd4471925cdd..158f5aa8dc5d 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.h +++ b/drivers/thermal/samsung/exynos_thermal_common.h @@ -27,6 +27,7 @@ #define SENSOR_NAME_LEN 16 #define MAX_TRIP_COUNT 8 #define MAX_COOLING_DEVICE 4 +#define MAX_TRIMINFO_CTRL_REG 2 #define ACTIVE_INTERVAL 500 #define IDLE_INTERVAL 10000 diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 35437dffaecc..092ab69d6282 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -127,7 +127,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev) struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct exynos_tmu_platform_data *pdata = data->pdata; const struct exynos_tmu_registers *reg = pdata->registers; - unsigned int status, trim_info = 0, con; + unsigned int status, trim_info = 0, con, ctrl; unsigned int rising_threshold = 0, falling_threshold = 0; int ret = 0, threshold_code, i; @@ -144,8 +144,17 @@ static int exynos_tmu_initialize(struct platform_device *pdev) } } - if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) - __raw_writel(1, data->base + reg->triminfo_ctrl); + if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) { + for (i = 0; i < reg->triminfo_ctrl_count; i++) { + if (pdata->triminfo_reload[i]) { + ctrl = readl(data->base + + reg->triminfo_ctrl[i]); + ctrl |= pdata->triminfo_reload[i]; + writel(ctrl, data->base + + reg->triminfo_ctrl[i]); + } + } + } /* Save trimming info in order to perform calibration */ if (data->soc == SOC_ARCH_EXYNOS5440) { diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index d503f35e3cd9..f67203bfd83c 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -78,6 +78,7 @@ enum soc_type { * slightly across different exynos SOC's. * @triminfo_data: register containing 2 pont trimming data * @triminfo_ctrl: trim info controller register. + * @triminfo_ctrl_count: the number of trim info controller register. * @tmu_ctrl: TMU main controller register. * @test_mux_addr_shift: shift bits of test mux address. * @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register. @@ -112,8 +113,8 @@ enum soc_type { struct exynos_tmu_registers { u32 triminfo_data; - u32 triminfo_ctrl; - u32 triminfo_ctrl1; + u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG]; + u32 triminfo_ctrl_count; u32 tmu_ctrl; u32 test_mux_addr_shift; @@ -200,6 +201,7 @@ struct exynos_tmu_registers { * @second_point_trim: temp value of the second point trimming * @default_temp_offset: default temperature offset in case of no trimming * @test_mux; information if SoC supports test MUX + * @triminfo_reload: reload value to read TRIMINFO register * @cal_type: calibration type for temperature * @freq_clip_table: Table representing frequency reduction percentage. * @freq_tab_count: Count of the above table as frequency reduction may @@ -230,6 +232,7 @@ struct exynos_tmu_platform_data { u8 second_point_trim; u8 default_temp_offset; u8 test_mux; + u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG]; enum calibration_type cal_type; enum soc_type type; diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c index 177ada5846cd..362a1e148551 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -169,7 +169,8 @@ struct exynos_tmu_init_data const exynos3250_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) static const struct exynos_tmu_registers exynos4412_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON, + .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON, + .triminfo_ctrl_count = 1, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, @@ -231,6 +232,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = { .temp_level = 95, \ }, \ .freq_tab_count = 2, \ + .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ .registers = &exynos4412_tmu_registers, \ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h index ac03b76c51cc..6b47a174c8fa 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.h +++ b/drivers/thermal/samsung/exynos_tmu_data.h @@ -51,6 +51,7 @@ #define EXYNOS_THD_TEMP_FALL 0x54 #define EXYNOS_EMUL_CON 0x80 +#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1 #define EXYNOS_TRIMINFO_25_SHIFT 0 #define EXYNOS_TRIMINFO_85_SHIFT 8 #define EXYNOS_TMU_RISE_INT_MASK 0x111