From: Tobias Klauser Date: Tue, 11 Apr 2006 05:54:21 +0000 (-0700) Subject: [PATCH] Last DMA_xBIT_MASK cleanups X-Git-Tag: MMI-PSA29.97-13-9~50272 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=56b146d36db933844011d5026c6f55593037c7b8;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git [PATCH] Last DMA_xBIT_MASK cleanups These are the last conversions of pci_set_dma_mask(), pci_set_consistent_dma_mask() and pci_dma_supported() to use DMA_xBIT_MASK constants from linux/dma-mapping.h Signed-off-by: Tobias Klauser Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt index ee4bb73683cd..10bf4deb96aa 100644 --- a/Documentation/DMA-mapping.txt +++ b/Documentation/DMA-mapping.txt @@ -194,7 +194,7 @@ document for how to handle this case. Finally, if your device can only drive the low 24-bits of address during PCI bus mastering you might do something like: - if (pci_set_dma_mask(pdev, 0x00ffffff)) { + if (pci_set_dma_mask(pdev, DMA_24BIT_MASK)) { printk(KERN_WARNING "mydev: 24-bit DMA addressing not available.\n"); goto ignore_this_device; @@ -212,7 +212,7 @@ functions (for example a sound card provides playback and record functions) and the various different functions have _different_ DMA addressing limitations, you may wish to probe each mask and only provide the functionality which the machine can handle. It -is important that the last call to pci_set_dma_mask() be for the +is important that the last call to pci_set_dma_mask() be for the most specific mask. Here is pseudo-code showing how this might be done: diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index 6feef9e82b63..68eeebc17ff4 100644 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -1123,8 +1123,8 @@ if ((err = pci_enable_device(pci)) < 0) return err; /* check PCI availability (28bit DMA) */ - if (pci_set_dma_mask(pci, 0x0fffffff) < 0 || - pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) { + if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 || + pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) { printk(KERN_ERR "error to set 28bit mask DMA\n"); pci_disable_device(pci); return -ENXIO; @@ -1216,7 +1216,7 @@ The allocation of PCI resources is done in the probe() function, and usually an extra xxx_create() function is written for this - purpose. + purpose. @@ -1225,7 +1225,7 @@ allocating resources. Also, you need to set the proper PCI DMA mask to limit the accessed i/o range. In some cases, you might need to call pci_set_master() function, - too. + too. @@ -1236,8 +1236,8 @@ Now assume that this PCI device has an I/O port with 8 bytes and an interrupt. Then struct mychip will have the - following fields: + following fields: diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index c98571c9d5a6..13de05532e0a 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -32,6 +32,7 @@ #include #include #include +#include #include "saa7134-reg.h" #include "saa7134.h" @@ -870,7 +871,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, pci_name(pci_dev), dev->pci_rev, pci_dev->irq, dev->pci_lat,pci_resource_start(pci_dev,0)); pci_set_master(pci_dev); - if (!pci_dma_supported(pci_dev,0xffffffff)) { + if (!pci_dma_supported(pci_dev, DMA_32BIT_MASK)) { printk("%s: Oops: no 32bit PCI DMA ???\n",dev->name); err = -EIO; goto fail1; diff --git a/drivers/sn/ioc3.c b/drivers/sn/ioc3.c index 93449a1a0065..0b49ff78efc1 100644 --- a/drivers/sn/ioc3.c +++ b/drivers/sn/ioc3.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -619,9 +620,9 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) pci_set_master(pdev); #ifdef USE_64BIT_DMA - ret = pci_set_dma_mask(pdev, 0xffffffffffffffffULL); + ret = pci_set_dma_mask(pdev, DMA_64BIT_MASK); if (!ret) { - ret = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL); + ret = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); if (ret < 0) { printk(KERN_WARNING "%s: Unable to obtain 64 bit DMA " "for consistent allocations\n", diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index 9b4751aecc23..ff61817082fa 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -21,7 +21,7 @@ enum dma_data_direction { #define DMA_30BIT_MASK 0x000000003fffffffULL #define DMA_29BIT_MASK 0x000000001fffffffULL #define DMA_28BIT_MASK 0x000000000fffffffULL -#define DMA_24BIT_MASK 0x0000000000ffffffULL +#define DMA_24BIT_MASK 0x0000000000ffffffULL #include diff --git a/sound/oss/emu10k1/main.c b/sound/oss/emu10k1/main.c index 0cd44a6f7ac0..3721c5857b90 100644 --- a/sound/oss/emu10k1/main.c +++ b/sound/oss/emu10k1/main.c @@ -94,6 +94,7 @@ #include #include #include +#include #include "hwaccess.h" #include "8010.h" @@ -119,7 +120,7 @@ /* the emu10k1 _seems_ to only supports 29 bit (512MiB) bit bus master */ -#define EMU10K1_DMA_MASK 0x1fffffff /* DMA buffer mask for pci_alloc_consist */ +#define EMU10K1_DMA_MASK DMA_29BIT_MASK /* DMA buffer mask for pci_alloc_consist */ #ifndef PCI_VENDOR_ID_CREATIVE #define PCI_VENDOR_ID_CREATIVE 0x1102 diff --git a/sound/pci/als300.c b/sound/pci/als300.c index 37b80570a5c6..91899f87f037 100644 --- a/sound/pci/als300.c +++ b/sound/pci/als300.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -691,8 +692,8 @@ static int __devinit snd_als300_create(snd_card_t *card, if ((err = pci_enable_device(pci)) < 0) return err; - if (pci_set_dma_mask(pci, 0x0fffffff) < 0 || - pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) { + if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 || + pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) { printk(KERN_ERR "error setting 28bit DMA mask\n"); pci_disable_device(pci); return -ENXIO;