From: Andrew Duggan Date: Thu, 10 Mar 2016 23:56:58 +0000 (-0800) Subject: Input: synaptics-rmi4 - add support for F30 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=562b42d3ee305472e1b2ea31574c59925e95fd7e;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git Input: synaptics-rmi4 - add support for F30 RMI4 F30 supports input from clickpad buttons and controls LEDs located on the touchpad PCB. This patch adds support of the clickpad buttons and defers supporting LEDs for the future. Signed-off-by: Andrew Duggan Signed-off-by: Benjamin Tissoires Tested-by: Benjamin Tissoires Tested-by: Linus Walleij Tested-by: Bjorn Andersson Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig index aabb8542a55d..284faec30a7a 100644 --- a/drivers/input/rmi4/Kconfig +++ b/drivers/input/rmi4/Kconfig @@ -43,3 +43,12 @@ config RMI4_F12 Function 12 provides 2D multifinger pointing for touchscreens and touchpads. For sensors that support relative pointing, F12 also provides mouse input. + +config RMI4_F30 + bool "RMI4 Function 30 (GPIO LED)" + depends on RMI4_CORE + help + Say Y here if you want to add support for RMI4 function 30. + + Function 30 provides GPIO and LED support for RMI4 devices. This + includes support for buttons on TouchPads and ClickPads. diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile index d01e703304c3..ad7156d8252c 100644 --- a/drivers/input/rmi4/Makefile +++ b/drivers/input/rmi4/Makefile @@ -6,6 +6,7 @@ rmi_core-$(CONFIG_RMI4_2D_SENSOR) += rmi_2d_sensor.o # Function drivers rmi_core-$(CONFIG_RMI4_F11) += rmi_f11.o rmi_core-$(CONFIG_RMI4_F12) += rmi_f12.o +rmi_core-$(CONFIG_RMI4_F30) += rmi_f30.o # Transports obj-$(CONFIG_RMI4_I2C) += rmi_i2c.o diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c index a3d766118b61..b368b0515c5a 100644 --- a/drivers/input/rmi4/rmi_bus.c +++ b/drivers/input/rmi4/rmi_bus.c @@ -312,6 +312,9 @@ static struct rmi_function_handler *fn_handlers[] = { #ifdef CONFIG_RMI4_F12 &rmi_f12_handler, #endif +#ifdef CONFIG_RMI4_F30 + &rmi_f30_handler, +#endif }; static void __rmi_unregister_function_handlers(int start_idx) diff --git a/drivers/input/rmi4/rmi_driver.h b/drivers/input/rmi4/rmi_driver.h index ed9127daf5a2..6e140fa3cce1 100644 --- a/drivers/input/rmi4/rmi_driver.h +++ b/drivers/input/rmi4/rmi_driver.h @@ -101,4 +101,5 @@ char *rmi_f01_get_product_ID(struct rmi_function *fn); extern struct rmi_function_handler rmi_f01_handler; extern struct rmi_function_handler rmi_f11_handler; extern struct rmi_function_handler rmi_f12_handler; +extern struct rmi_function_handler rmi_f30_handler; #endif diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c new file mode 100644 index 000000000000..760aff1bc420 --- /dev/null +++ b/drivers/input/rmi4/rmi_f30.c @@ -0,0 +1,407 @@ +/* + * Copyright (c) 2012-2016 Synaptics Incorporated + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include +#include +#include +#include +#include "rmi_driver.h" + +#define RMI_F30_QUERY_SIZE 2 + +/* Defs for Query 0 */ +#define RMI_F30_EXTENDED_PATTERNS 0x01 +#define RMI_F30_HAS_MAPPABLE_BUTTONS (1 << 1) +#define RMI_F30_HAS_LED (1 << 2) +#define RMI_F30_HAS_GPIO (1 << 3) +#define RMI_F30_HAS_HAPTIC (1 << 4) +#define RMI_F30_HAS_GPIO_DRV_CTL (1 << 5) +#define RMI_F30_HAS_MECH_MOUSE_BTNS (1 << 6) + +/* Defs for Query 1 */ +#define RMI_F30_GPIO_LED_COUNT 0x1F + +/* Defs for Control Registers */ +#define RMI_F30_CTRL_1_GPIO_DEBOUNCE 0x01 +#define RMI_F30_CTRL_1_HALT (1 << 4) +#define RMI_F30_CTRL_1_HALTED (1 << 5) +#define RMI_F30_CTRL_10_NUM_MECH_MOUSE_BTNS 0x03 + +struct rmi_f30_ctrl_data { + int address; + int length; + u8 *regs; +}; + +#define RMI_F30_CTRL_MAX_REGS 32 +#define RMI_F30_CTRL_MAX_BYTES ((RMI_F30_CTRL_MAX_REGS + 7) >> 3) +#define RMI_F30_CTRL_MAX_REG_BLOCKS 11 + +#define RMI_F30_CTRL_REGS_MAX_SIZE (RMI_F30_CTRL_MAX_BYTES \ + + 1 \ + + RMI_F30_CTRL_MAX_BYTES \ + + RMI_F30_CTRL_MAX_BYTES \ + + RMI_F30_CTRL_MAX_BYTES \ + + 6 \ + + RMI_F30_CTRL_MAX_REGS \ + + RMI_F30_CTRL_MAX_REGS \ + + RMI_F30_CTRL_MAX_BYTES \ + + 1 \ + + 1) + +struct f30_data { + /* Query Data */ + bool has_extended_pattern; + bool has_mappable_buttons; + bool has_led; + bool has_gpio; + bool has_haptic; + bool has_gpio_driver_control; + bool has_mech_mouse_btns; + u8 gpioled_count; + + u8 register_count; + + /* Control Register Data */ + struct rmi_f30_ctrl_data ctrl[RMI_F30_CTRL_MAX_REG_BLOCKS]; + u8 ctrl_regs[RMI_F30_CTRL_REGS_MAX_SIZE]; + u32 ctrl_regs_size; + + u8 data_regs[RMI_F30_CTRL_MAX_BYTES]; + u16 *gpioled_key_map; + + struct input_dev *input; +}; + +static int rmi_f30_read_control_parameters(struct rmi_function *fn, + struct f30_data *f30) +{ + struct rmi_device *rmi_dev = fn->rmi_dev; + int error = 0; + + error = rmi_read_block(rmi_dev, fn->fd.control_base_addr, + f30->ctrl_regs, f30->ctrl_regs_size); + if (error) { + dev_err(&rmi_dev->dev, "%s : Could not read control registers at 0x%x error (%d)\n", + __func__, fn->fd.control_base_addr, error); + return error; + } + + return 0; +} + +static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) +{ + struct f30_data *f30 = dev_get_drvdata(&fn->dev); + struct rmi_device *rmi_dev = fn->rmi_dev; + int retval; + int gpiled = 0; + int value = 0; + int i; + int reg_num; + + if (!f30->input) + return 0; + + /* Read the gpi led data. */ + if (rmi_dev->xport->attn_data) { + memcpy(f30->data_regs, rmi_dev->xport->attn_data, + f30->register_count); + rmi_dev->xport->attn_data += f30->register_count; + rmi_dev->xport->attn_size -= f30->register_count; + } else { + retval = rmi_read_block(rmi_dev, fn->fd.data_base_addr, + f30->data_regs, f30->register_count); + + if (retval) { + dev_err(&fn->dev, "%s: Failed to read F30 data registers.\n", + __func__); + return retval; + } + } + + for (reg_num = 0; reg_num < f30->register_count; ++reg_num) { + for (i = 0; gpiled < f30->gpioled_count && i < 8; ++i, + ++gpiled) { + if (f30->gpioled_key_map[gpiled] != 0) { + /* buttons have pull up resistors */ + value = (((f30->data_regs[reg_num] >> i) & 0x01) + == 0); + + rmi_dbg(RMI_DEBUG_FN, &fn->dev, + "%s: call input report key (0x%04x) value (0x%02x)", + __func__, + f30->gpioled_key_map[gpiled], value); + input_report_key(f30->input, + f30->gpioled_key_map[gpiled], + value); + } + + } + } + + return 0; +} + +static int rmi_f30_register_device(struct rmi_function *fn) +{ + int i; + struct rmi_device *rmi_dev = fn->rmi_dev; + struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev); + struct f30_data *f30 = dev_get_drvdata(&fn->dev); + struct input_dev *input_dev; + int button_count = 0; + + input_dev = drv_data->input; + if (!input_dev) { + dev_info(&fn->dev, "F30: no input device found, ignoring.\n"); + return -EINVAL; + } + + f30->input = input_dev; + + set_bit(EV_KEY, input_dev->evbit); + + input_dev->keycode = f30->gpioled_key_map; + input_dev->keycodesize = sizeof(u16); + input_dev->keycodemax = f30->gpioled_count; + + for (i = 0; i < f30->gpioled_count; i++) { + if (f30->gpioled_key_map[i] != 0) { + input_set_capability(input_dev, EV_KEY, + f30->gpioled_key_map[i]); + button_count++; + } + } + + if (button_count == 1) + __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit); + return 0; +} + +static int rmi_f30_config(struct rmi_function *fn) +{ + struct f30_data *f30 = dev_get_drvdata(&fn->dev); + struct rmi_driver *drv = fn->rmi_dev->driver; + const struct rmi_device_platform_data *pdata = + rmi_get_platform_data(fn->rmi_dev); + int error; + + if (pdata->f30_data && pdata->f30_data->disable) { + drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask); + } else { + /* Write Control Register values back to device */ + error = rmi_write_block(fn->rmi_dev, fn->fd.control_base_addr, + f30->ctrl_regs, f30->ctrl_regs_size); + if (error) { + dev_err(&fn->rmi_dev->dev, + "%s : Could not write control registers at 0x%x error (%d)\n", + __func__, fn->fd.control_base_addr, error); + return error; + } + + drv->set_irq_bits(fn->rmi_dev, fn->irq_mask); + } + return 0; +} + +static inline void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl, + int *ctrl_addr, int len, u8 **reg) +{ + ctrl->address = *ctrl_addr; + ctrl->length = len; + ctrl->regs = *reg; + *ctrl_addr += len; + *reg += len; +} + +static inline bool rmi_f30_is_valid_button(int button, + struct rmi_f30_ctrl_data *ctrl) +{ + int byte_position = button >> 3; + int bit_position = button & 0x07; + + /* + * ctrl2 -> dir == 0 -> input mode + * ctrl3 -> data == 1 -> actual button + */ + return !(ctrl[2].regs[byte_position] & BIT(bit_position)) && + (ctrl[3].regs[byte_position] & BIT(bit_position)); +} + +static inline int rmi_f30_initialize(struct rmi_function *fn) +{ + struct f30_data *f30; + struct rmi_device *rmi_dev = fn->rmi_dev; + const struct rmi_device_platform_data *pdata; + int retval = 0; + int control_address; + int i; + int button; + u8 buf[RMI_F30_QUERY_SIZE]; + u8 *ctrl_reg; + u8 *map_memory; + + f30 = devm_kzalloc(&fn->dev, sizeof(struct f30_data), + GFP_KERNEL); + if (!f30) + return -ENOMEM; + + dev_set_drvdata(&fn->dev, f30); + + retval = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr, buf, + RMI_F30_QUERY_SIZE); + + if (retval) { + dev_err(&fn->dev, "Failed to read query register.\n"); + return retval; + } + + f30->has_extended_pattern = buf[0] & RMI_F30_EXTENDED_PATTERNS; + f30->has_mappable_buttons = buf[0] & RMI_F30_HAS_MAPPABLE_BUTTONS; + f30->has_led = buf[0] & RMI_F30_HAS_LED; + f30->has_gpio = buf[0] & RMI_F30_HAS_GPIO; + f30->has_haptic = buf[0] & RMI_F30_HAS_HAPTIC; + f30->has_gpio_driver_control = buf[0] & RMI_F30_HAS_GPIO_DRV_CTL; + f30->has_mech_mouse_btns = buf[0] & RMI_F30_HAS_MECH_MOUSE_BTNS; + f30->gpioled_count = buf[1] & RMI_F30_GPIO_LED_COUNT; + + f30->register_count = (f30->gpioled_count + 7) >> 3; + + control_address = fn->fd.control_base_addr; + ctrl_reg = f30->ctrl_regs; + + if (f30->has_gpio && f30->has_led) + rmi_f30_set_ctrl_data(&f30->ctrl[0], &control_address, + f30->register_count, &ctrl_reg); + + rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address, sizeof(u8), + &ctrl_reg); + + if (f30->has_gpio) { + rmi_f30_set_ctrl_data(&f30->ctrl[2], &control_address, + f30->register_count, &ctrl_reg); + + rmi_f30_set_ctrl_data(&f30->ctrl[3], &control_address, + f30->register_count, &ctrl_reg); + } + + if (f30->has_led) { + int ctrl5_len; + + rmi_f30_set_ctrl_data(&f30->ctrl[4], &control_address, + f30->register_count, &ctrl_reg); + + if (f30->has_extended_pattern) + ctrl5_len = 6; + else + ctrl5_len = 2; + + rmi_f30_set_ctrl_data(&f30->ctrl[5], &control_address, + ctrl5_len, &ctrl_reg); + } + + if (f30->has_led || f30->has_gpio_driver_control) { + /* control 6 uses a byte per gpio/led */ + rmi_f30_set_ctrl_data(&f30->ctrl[6], &control_address, + f30->gpioled_count, &ctrl_reg); + } + + if (f30->has_mappable_buttons) { + /* control 7 uses a byte per gpio/led */ + rmi_f30_set_ctrl_data(&f30->ctrl[7], &control_address, + f30->gpioled_count, &ctrl_reg); + } + + if (f30->has_haptic) { + rmi_f30_set_ctrl_data(&f30->ctrl[8], &control_address, + f30->register_count, &ctrl_reg); + + rmi_f30_set_ctrl_data(&f30->ctrl[9], &control_address, + sizeof(u8), &ctrl_reg); + } + + if (f30->has_mech_mouse_btns) + rmi_f30_set_ctrl_data(&f30->ctrl[10], &control_address, + sizeof(u8), &ctrl_reg); + + f30->ctrl_regs_size = ctrl_reg - f30->ctrl_regs + ?: RMI_F30_CTRL_REGS_MAX_SIZE; + + retval = rmi_f30_read_control_parameters(fn, f30); + if (retval < 0) { + dev_err(&fn->dev, + "Failed to initialize F19 control params.\n"); + return retval; + } + + map_memory = devm_kzalloc(&fn->dev, + (f30->gpioled_count * (sizeof(u16))), + GFP_KERNEL); + if (!map_memory) { + dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n"); + return -ENOMEM; + } + + f30->gpioled_key_map = (u16 *)map_memory; + + pdata = rmi_get_platform_data(rmi_dev); + if (pdata && f30->has_gpio) { + button = BTN_LEFT; + for (i = 0; i < f30->gpioled_count; i++) { + if (rmi_f30_is_valid_button(i, f30->ctrl)) { + f30->gpioled_key_map[i] = button++; + + /* + * buttonpad might be given by + * f30->has_mech_mouse_btns, but I am + * not sure, so use only the pdata info + */ + if (pdata->f30_data && + pdata->f30_data->buttonpad) + break; + } + } + } + + return 0; +} + +static int rmi_f30_probe(struct rmi_function *fn) +{ + int rc; + const struct rmi_device_platform_data *pdata = + rmi_get_platform_data(fn->rmi_dev); + + if (pdata->f30_data && pdata->f30_data->disable) + return 0; + + rc = rmi_f30_initialize(fn); + if (rc < 0) + goto error_exit; + + rc = rmi_f30_register_device(fn); + if (rc < 0) + goto error_exit; + + return 0; + +error_exit: + return rc; + +} + +struct rmi_function_handler rmi_f30_handler = { + .driver = { + .name = "rmi4_f30", + }, + .func = 0x30, + .probe = rmi_f30_probe, + .config = rmi_f30_config, + .attention = rmi_f30_attention, +}; diff --git a/include/linux/rmi.h b/include/linux/rmi.h index b527064bac47..ac89d1e731dc 100644 --- a/include/linux/rmi.h +++ b/include/linux/rmi.h @@ -101,6 +101,21 @@ struct rmi_2d_sensor_platform_data { int dmax; }; +/** + * struct rmi_f30_data - overrides defaults for a single F30 GPIOs/LED chip. + * @buttonpad - the touchpad is a buttonpad, so enable only the first actual + * button that is found. + * @trackstick_buttons - Set when the function 30 is handling the physical + * buttons of the trackstick (as a PD/2 passthrough device. + * @disable - the touchpad incorrectly reports F30 and it should be ignored. + * This is a special case which is due to misconfigured firmware. + */ +struct rmi_f30_data { + bool buttonpad; + bool trackstick_buttons; + bool disable; +}; + /** * struct rmi_f01_power - override default power management settings. * @@ -147,6 +162,7 @@ struct rmi_device_platform_data { /* function handler pdata */ struct rmi_2d_sensor_platform_data *sensor_pdata; struct rmi_f01_power_management power_management; + struct rmi_f30_data *f30_data; }; /**