From: Guillaume Nault Date: Sat, 27 Aug 2016 20:22:32 +0000 (+0200) Subject: ppp: avoid dealock on recursive xmit X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=55454a565836e1cb002d433e901804dea4406a32;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git ppp: avoid dealock on recursive xmit In case of misconfiguration, a virtual PPP channel might send packets back to their parent PPP interface. This typically happens in misconfigured L2TP setups, where PPP's peer IP address is set with the IP of the L2TP peer. When that happens the system hangs due to PPP trying to recursively lock its xmit path. [ 243.332155] BUG: spinlock recursion on CPU#1, accel-pppd/926 [ 243.333272] lock: 0xffff880033d90f18, .magic: dead4ead, .owner: accel-pppd/926, .owner_cpu: 1 [ 243.334859] CPU: 1 PID: 926 Comm: accel-pppd Not tainted 4.8.0-rc2 #1 [ 243.336010] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 243.336018] ffff7fffffffffff ffff8800319a77a0 ffffffff8128de85 ffff880033d90f18 [ 243.336018] ffff880033ad8000 ffff8800319a77d8 ffffffff810ad7c0 ffffffff0000039e [ 243.336018] ffff880033d90f18 ffff880033d90f60 ffff880033d90f18 ffff880033d90f28 [ 243.336018] Call Trace: [ 243.336018] [] dump_stack+0x4f/0x65 [ 243.336018] [] spin_dump+0xe1/0xeb [ 243.336018] [] spin_bug+0x26/0x28 [ 243.336018] [] do_raw_spin_lock+0x5c/0x160 [ 243.336018] [] _raw_spin_lock_bh+0x35/0x3c [ 243.336018] [] ? ppp_push+0xa7/0x82d [ppp_generic] [ 243.336018] [] ppp_push+0xa7/0x82d [ppp_generic] [ 243.336018] [] ? do_raw_spin_unlock+0xc2/0xcc [ 243.336018] [] ? preempt_count_sub+0x13/0xc7 [ 243.336018] [] ? _raw_spin_unlock_irqrestore+0x34/0x49 [ 243.336018] [] ppp_xmit_process+0x48/0x877 [ppp_generic] [ 243.336018] [] ? preempt_count_sub+0x13/0xc7 [ 243.336018] [] ? skb_queue_tail+0x71/0x7c [ 243.336018] [] ppp_start_xmit+0x21b/0x22a [ppp_generic] [ 243.336018] [] dev_hard_start_xmit+0x15e/0x32c [ 243.336018] [] sch_direct_xmit+0xd6/0x221 [ 243.336018] [] __dev_queue_xmit+0x52a/0x820 [ 243.336018] [] dev_queue_xmit+0xb/0xd [ 243.336018] [] neigh_direct_output+0xc/0xe [ 243.336018] [] ip_finish_output2+0x4d2/0x548 [ 243.336018] [] ? dst_mtu+0x29/0x2e [ 243.336018] [] ip_finish_output+0x152/0x15e [ 243.336018] [] ? ip_output+0x74/0x96 [ 243.336018] [] ip_output+0x8c/0x96 [ 243.336018] [] ip_local_out+0x41/0x4a [ 243.336018] [] ip_queue_xmit+0x531/0x5c5 [ 243.336018] [] ? udp_set_csum+0x207/0x21e [ 243.336018] [] l2tp_xmit_skb+0x582/0x5d7 [l2tp_core] [ 243.336018] [] pppol2tp_xmit+0x1eb/0x257 [l2tp_ppp] [ 243.336018] [] ppp_channel_push+0x91/0x102 [ppp_generic] [ 243.336018] [] ppp_write+0x104/0x11c [ppp_generic] [ 243.336018] [] __vfs_write+0x56/0x120 [ 243.336018] [] ? fsnotify_perm+0x27/0x95 [ 243.336018] [] ? security_file_permission+0x4d/0x54 [ 243.336018] [] vfs_write+0xbd/0x11b [ 243.336018] [] SyS_write+0x5e/0x96 [ 243.336018] [] entry_SYSCALL_64_fastpath+0x13/0x94 The main entry points for sending packets over a PPP unit are the .write() and .ndo_start_xmit() callbacks (simplified view): .write(unit fd) or .ndo_start_xmit() \ CALL ppp_xmit_process() \ LOCK unit's xmit path (ppp->wlock) | CALL ppp_push() \ LOCK channel's xmit path (chan->downl) | CALL lower layer's .start_xmit() callback \ ... might recursively call .ndo_start_xmit() ... / RETURN from .start_xmit() | UNLOCK channel's xmit path / RETURN from ppp_push() | UNLOCK unit's xmit path / RETURN from ppp_xmit_process() Packets can also be directly sent on channels (e.g. LCP packets): .write(channel fd) or ppp_output_wakeup() \ CALL ppp_channel_push() \ LOCK channel's xmit path (chan->downl) | CALL lower layer's .start_xmit() callback \ ... might call .ndo_start_xmit() ... / RETURN from .start_xmit() | UNLOCK channel's xmit path / RETURN from ppp_channel_push() Key points about the lower layer's .start_xmit() callback: * It can be called directly by a channel fd .write() or by ppp_output_wakeup() or indirectly by a unit fd .write() or by .ndo_start_xmit(). * In any case, it's always called with chan->downl held. * It might route the packet back to its parent unit using .ndo_start_xmit() as entry point. This patch detects and breaks recursion in ppp_xmit_process(). This function is a good candidate for the task because it's called early enough after .ndo_start_xmit(), it's always part of the recursion loop and it's on the path of whatever entry point is used to send a packet on a PPP unit. Recursion detection is done using the per-cpu ppp_xmit_recursion variable. Since ppp_channel_push() too locks the channel's xmit path and calls the lower layer's .start_xmit() callback, we need to also increment ppp_xmit_recursion there. However there's no need to check for recursion, as it's out of the recursion loop. Reported-by: Feng Gao Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller --- diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index 70cfa06ccd40..57fc550aa14b 100644 --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -1376,12 +1376,8 @@ static void ppp_setup(struct net_device *dev) * Transmit-side routines. */ -/* - * Called to do any work queued up on the transmit side - * that can now be done. - */ -static void -ppp_xmit_process(struct ppp *ppp) +/* Called to do any work queued up on the transmit side that can now be done */ +static void __ppp_xmit_process(struct ppp *ppp) { struct sk_buff *skb; @@ -1401,6 +1397,30 @@ ppp_xmit_process(struct ppp *ppp) ppp_xmit_unlock(ppp); } +static DEFINE_PER_CPU(int, ppp_xmit_recursion); + +static void ppp_xmit_process(struct ppp *ppp) +{ + local_bh_disable(); + + if (unlikely(__this_cpu_read(ppp_xmit_recursion))) + goto err; + + __this_cpu_inc(ppp_xmit_recursion); + __ppp_xmit_process(ppp); + __this_cpu_dec(ppp_xmit_recursion); + + local_bh_enable(); + + return; + +err: + local_bh_enable(); + + if (net_ratelimit()) + netdev_err(ppp->dev, "recursion detected\n"); +} + static inline struct sk_buff * pad_compress_skb(struct ppp *ppp, struct sk_buff *skb) { @@ -1856,11 +1876,8 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) } #endif /* CONFIG_PPP_MULTILINK */ -/* - * Try to send data out on a channel. - */ -static void -ppp_channel_push(struct channel *pch) +/* Try to send data out on a channel */ +static void __ppp_channel_push(struct channel *pch) { struct sk_buff *skb; struct ppp *ppp; @@ -1885,11 +1902,22 @@ ppp_channel_push(struct channel *pch) read_lock_bh(&pch->upl); ppp = pch->ppp; if (ppp) - ppp_xmit_process(ppp); + __ppp_xmit_process(ppp); read_unlock_bh(&pch->upl); } } +static void ppp_channel_push(struct channel *pch) +{ + local_bh_disable(); + + __this_cpu_inc(ppp_xmit_recursion); + __ppp_channel_push(pch); + __this_cpu_dec(ppp_xmit_recursion); + + local_bh_enable(); +} + /* * Receive-side routines. */