From: Benjamin Herrenschmidt Date: Thu, 20 Dec 2007 04:10:02 +0000 (+1100) Subject: [POWERPC] Fix PCI IRQ fallback code to not map IRQ 0 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=54a24cbbd0184faffc37c39cd3a896f4ddac3e03;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git [POWERPC] Fix PCI IRQ fallback code to not map IRQ 0 The PCI IRQ code has a fallback when the device-tree parsing fails, that tries to map the interrupt indicated by PCI_INTERRUPT_LINE if the firmware set something in there. This is a bit fragile but has proven useful in some cases so far. However, it's causing us to incorrectly try to map interrupt 0 on various setups, so let's prevent that case, as none of the cases where the fallback is legit should have an IRQ 0. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 88838b0f8b90..571854f2906c 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -225,10 +225,11 @@ int pci_read_irq_line(struct pci_dev *pci_dev) if (pin == 0) return -1; if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) || - line == 0xff) { + line == 0xff || line == 0) { return -1; } - DBG(" -> no map ! Using irq line %d from PCI config\n", line); + DBG(" -> no map ! Using line %d (pin %d) from PCI config\n", + line, pin); virq = irq_create_mapping(NULL, line); if (virq != NO_IRQ)