From: Sujith Date: Tue, 3 Mar 2009 04:46:54 +0000 (+0530) Subject: ath9k: Split beacon configuration into mode specific routines X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=5379c8a26686e12058e23322615df68f9123bccd;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git ath9k: Split beacon configuration into mode specific routines This makes the code easier to understand. Signed-off-by: Sujith Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h index f5d099f0ab4c..0769a252dfe1 100644 --- a/drivers/net/wireless/ath9k/ath9k.h +++ b/drivers/net/wireless/ath9k/ath9k.h @@ -458,7 +458,6 @@ void ath_beacon_config(struct ath_softc *sc, int if_id); int ath_beaconq_setup(struct ath_hw *ah); int ath_beacon_alloc(struct ath_softc *sc, int if_id); void ath_beacon_return(struct ath_softc *sc, struct ath_vif *avp); -void ath_beacon_sync(struct ath_softc *sc, int if_id); /*******/ /* ANI */ diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index 349904c761e4..74916431f575 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -16,6 +16,8 @@ #include "ath9k.h" +#define FUDGE 2 + /* * This function will modify certain transmit queue properties depending on * the operating mode of the station (AP or AdHoc). Parameters are AIFS @@ -498,235 +500,231 @@ void ath_beacon_tasklet(unsigned long data) } /* - * Configure the beacon and sleep timers. - * - * When operating as an AP this resets the TSF and sets - * up the hardware to notify us when we need to issue beacons. - * - * When operating in station mode this sets up the beacon - * timers according to the timestamp of the last received - * beacon and the current TSF, configures PCF and DTIM - * handling, programs the sleep registers so the hardware - * will wakeup in time to receive beacons, and configures - * the beacon miss handling so we'll receive a BMISS - * interrupt when we stop seeing beacons from the AP - * we've associated with. + * For multi-bss ap support beacons are either staggered evenly over N slots or + * burst together. For the former arrange for the SWBA to be delivered for each + * slot. Slots that are not occupied will generate nothing. */ -void ath_beacon_config(struct ath_softc *sc, int if_id) +static void ath_beacon_config_ap(struct ath_softc *sc, + struct ath_beacon_config *conf, + struct ath_vif *avp) { - struct ieee80211_vif *vif; - struct ath_hw *ah = sc->sc_ah; - struct ath_beacon_config conf; - struct ath_vif *avp; - enum nl80211_iftype opmode; u32 nexttbtt, intval; - if (if_id != ATH_IF_ID_ANY) { - vif = sc->vifs[if_id]; - avp = (void *)vif->drv_priv; - opmode = avp->av_opmode; - } else { - opmode = sc->sc_ah->opmode; - } + /* NB: the beacon interval is kept internally in TU's */ + intval = conf->beacon_interval & ATH9K_BEACON_PERIOD; + intval /= ATH_BCBUF; /* for staggered beacons */ + nexttbtt = intval; + intval |= ATH9K_BEACON_RESET_TSF; - memset(&conf, 0, sizeof(struct ath_beacon_config)); + /* + * In AP mode we enable the beacon timers and SWBA interrupts to + * prepare beacon frames. + */ + intval |= ATH9K_BEACON_ENA; + sc->imask |= ATH9K_INT_SWBA; + ath_beaconq_config(sc); - conf.beacon_interval = sc->hw->conf.beacon_int ? - sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; - conf.listen_interval = 1; - conf.dtim_period = conf.beacon_interval; - conf.dtim_count = 1; - conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval; + /* Set the computed AP beacon timers */ - /* extract tstamp from last beacon and convert to TU */ - nexttbtt = TSF_TO_TU(sc->beacon.bc_tstamp >> 32, sc->beacon.bc_tstamp); + ath9k_hw_set_interrupts(sc->sc_ah, 0); + ath9k_hw_beaconinit(sc->sc_ah, nexttbtt, intval); + sc->beacon.bmisscnt = 0; + ath9k_hw_set_interrupts(sc->sc_ah, sc->imask); +} - /* XXX conditionalize multi-bss support? */ - if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) { - /* - * For multi-bss ap support beacons are either staggered - * evenly over N slots or burst together. For the former - * arrange for the SWBA to be delivered for each slot. - * Slots that are not occupied will generate nothing. - */ - /* NB: the beacon interval is kept internally in TU's */ - intval = conf.beacon_interval & ATH9K_BEACON_PERIOD; - intval /= ATH_BCBUF; /* for staggered beacons */ +/* + * This sets up the beacon timers according to the timestamp of the last + * received beacon and the current TSF, configures PCF and DTIM + * handling, programs the sleep registers so the hardware will wakeup in + * time to receive beacons, and configures the beacon miss handling so + * we'll receive a BMISS interrupt when we stop seeing beacons from the AP + * we've associated with. + */ +static void ath_beacon_config_sta(struct ath_softc *sc, + struct ath_beacon_config *conf, + struct ath_vif *avp) +{ + struct ath9k_beacon_state bs; + int dtimperiod, dtimcount, sleepduration; + int cfpperiod, cfpcount; + u32 nexttbtt = 0, intval, tsftu; + u64 tsf; + + memset(&bs, 0, sizeof(bs)); + intval = conf->beacon_interval & ATH9K_BEACON_PERIOD; + + /* + * Setup dtim and cfp parameters according to + * last beacon we received (which may be none). + */ + dtimperiod = conf->dtim_period; + if (dtimperiod <= 0) /* NB: 0 if not known */ + dtimperiod = 1; + dtimcount = conf->dtim_count; + if (dtimcount >= dtimperiod) /* NB: sanity check */ + dtimcount = 0; + cfpperiod = 1; /* NB: no PCF support yet */ + cfpcount = 0; + + sleepduration = conf->listen_interval * intval; + if (sleepduration <= 0) + sleepduration = intval; + + /* + * Pull nexttbtt forward to reflect the current + * TSF and calculate dtim+cfp state for the result. + */ + tsf = ath9k_hw_gettsf64(sc->sc_ah); + tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE; + do { + nexttbtt += intval; + if (--dtimcount < 0) { + dtimcount = dtimperiod - 1; + if (--cfpcount < 0) + cfpcount = cfpperiod - 1; + } + } while (nexttbtt < tsftu); + + bs.bs_intval = intval; + bs.bs_nexttbtt = nexttbtt; + bs.bs_dtimperiod = dtimperiod*intval; + bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval; + bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod; + bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod; + bs.bs_cfpmaxduration = 0; + + /* + * Calculate the number of consecutive beacons to miss* before taking + * a BMISS interrupt. The configuration is specified in TU so we only + * need calculate based on the beacon interval. Note that we clamp the + * result to at most 15 beacons. + */ + if (sleepduration > intval) { + bs.bs_bmissthreshold = conf->listen_interval * + ATH_DEFAULT_BMISS_LIMIT / 2; } else { - intval = conf.beacon_interval & ATH9K_BEACON_PERIOD; + bs.bs_bmissthreshold = DIV_ROUND_UP(conf->bmiss_timeout, intval); + if (bs.bs_bmissthreshold > 15) + bs.bs_bmissthreshold = 15; + else if (bs.bs_bmissthreshold <= 0) + bs.bs_bmissthreshold = 1; } - if (nexttbtt == 0) /* e.g. for ap mode */ - nexttbtt = intval; - else if (intval) /* NB: can be 0 for monitor mode */ - nexttbtt = roundup(nexttbtt, intval); + /* + * Calculate sleep duration. The configuration is given in ms. + * We ensure a multiple of the beacon period is used. Also, if the sleep + * duration is greater than the DTIM period then it makes senses + * to make it a multiple of that. + * + * XXX fixed at 100ms + */ - DPRINTF(sc, ATH_DBG_BEACON, "nexttbtt %u intval %u (%u)\n", - nexttbtt, intval, conf.beacon_interval); + bs.bs_sleepduration = roundup(IEEE80211_MS_TO_TU(100), sleepduration); + if (bs.bs_sleepduration > bs.bs_dtimperiod) + bs.bs_sleepduration = bs.bs_dtimperiod; - /* Check for NL80211_IFTYPE_AP and sc_nostabeacons for WDS client */ - if (sc->sc_ah->opmode == NL80211_IFTYPE_STATION) { - struct ath9k_beacon_state bs; - u64 tsf; - u32 tsftu; - int dtimperiod, dtimcount, sleepduration; - int cfpperiod, cfpcount; + /* TSF out of range threshold fixed at 1 second */ + bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD; - /* - * Setup dtim and cfp parameters according to - * last beacon we received (which may be none). - */ - dtimperiod = conf.dtim_period; - if (dtimperiod <= 0) /* NB: 0 if not known */ - dtimperiod = 1; - dtimcount = conf.dtim_count; - if (dtimcount >= dtimperiod) /* NB: sanity check */ - dtimcount = 0; - cfpperiod = 1; /* NB: no PCF support yet */ - cfpcount = 0; - - sleepduration = conf.listen_interval * intval; - if (sleepduration <= 0) - sleepduration = intval; + DPRINTF(sc, ATH_DBG_BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu); + DPRINTF(sc, ATH_DBG_BEACON, + "bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n", + bs.bs_bmissthreshold, bs.bs_sleepduration, + bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext); -#define FUDGE 2 - /* - * Pull nexttbtt forward to reflect the current - * TSF and calculate dtim+cfp state for the result. - */ - tsf = ath9k_hw_gettsf64(ah); - tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE; - do { - nexttbtt += intval; - if (--dtimcount < 0) { - dtimcount = dtimperiod - 1; - if (--cfpcount < 0) - cfpcount = cfpperiod - 1; - } - } while (nexttbtt < tsftu); -#undef FUDGE - memset(&bs, 0, sizeof(bs)); - bs.bs_intval = intval; - bs.bs_nexttbtt = nexttbtt; - bs.bs_dtimperiod = dtimperiod*intval; - bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval; - bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod; - bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod; - bs.bs_cfpmaxduration = 0; + /* Set the computed STA beacon timers */ - /* - * Calculate the number of consecutive beacons to miss - * before taking a BMISS interrupt. The configuration - * is specified in TU so we only need calculate based - * on the beacon interval. Note that we clamp the - * result to at most 15 beacons. - */ - if (sleepduration > intval) { - bs.bs_bmissthreshold = conf.listen_interval * - ATH_DEFAULT_BMISS_LIMIT / 2; - } else { - bs.bs_bmissthreshold = - DIV_ROUND_UP(conf.bmiss_timeout, intval); - if (bs.bs_bmissthreshold > 15) - bs.bs_bmissthreshold = 15; - else if (bs.bs_bmissthreshold <= 0) - bs.bs_bmissthreshold = 1; - } + ath9k_hw_set_interrupts(sc->sc_ah, 0); + ath9k_hw_set_sta_beacon_timers(sc->sc_ah, &bs); + sc->imask |= ATH9K_INT_BMISS; + ath9k_hw_set_interrupts(sc->sc_ah, sc->imask); +} - /* - * Calculate sleep duration. The configuration is - * given in ms. We insure a multiple of the beacon - * period is used. Also, if the sleep duration is - * greater than the DTIM period then it makes senses - * to make it a multiple of that. - * - * XXX fixed at 100ms - */ +static void ath_beacon_config_adhoc(struct ath_softc *sc, + struct ath_beacon_config *conf, + struct ath_vif *avp) +{ + u64 tsf; + u32 tsftu, intval, nexttbtt; - bs.bs_sleepduration = roundup(IEEE80211_MS_TO_TU(100), - sleepduration); - if (bs.bs_sleepduration > bs.bs_dtimperiod) - bs.bs_sleepduration = bs.bs_dtimperiod; + intval = conf->beacon_interval & ATH9K_BEACON_PERIOD; - /* TSF out of range threshold fixed at 1 second */ - bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD; + /* Pull nexttbtt forward to reflect the current TSF */ - DPRINTF(sc, ATH_DBG_BEACON, - "tsf: %llu tsftu: %u\n", tsf, tsftu); - DPRINTF(sc, ATH_DBG_BEACON, - "bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n", - bs.bs_bmissthreshold, bs.bs_sleepduration, - bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext); - - ath9k_hw_set_interrupts(ah, 0); - ath9k_hw_set_sta_beacon_timers(ah, &bs); - sc->imask |= ATH9K_INT_BMISS; - ath9k_hw_set_interrupts(ah, sc->imask); - } else { - u64 tsf; - u32 tsftu; + nexttbtt = TSF_TO_TU(sc->beacon.bc_tstamp >> 32, sc->beacon.bc_tstamp); + if (nexttbtt == 0) + nexttbtt = intval; + else if (intval) + nexttbtt = roundup(nexttbtt, intval); - ath9k_hw_set_interrupts(ah, 0); - if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) { - /* Pull nexttbtt forward to reflect the current TSF */ -#define FUDGE 2 - if (!(intval & ATH9K_BEACON_RESET_TSF)) { - tsf = ath9k_hw_gettsf64(ah); - tsftu = TSF_TO_TU((u32)(tsf>>32), - (u32)tsf) + FUDGE; - do { - nexttbtt += intval; - } while (nexttbtt < tsftu); - } -#undef FUDGE - DPRINTF(sc, ATH_DBG_BEACON, - "IBSS nexttbtt %u intval %u (%u)\n", - nexttbtt, intval & ~ATH9K_BEACON_RESET_TSF, - conf.beacon_interval); + tsf = ath9k_hw_gettsf64(sc->sc_ah); + tsftu = TSF_TO_TU((u32)(tsf>>32), (u32)tsf) + FUDGE; + do { + nexttbtt += intval; + } while (nexttbtt < tsftu); - /* - * In IBSS mode enable the beacon timers but only - * enable SWBA interrupts if we need to manually - * prepare beacon frames. Otherwise we use a - * self-linked tx descriptor and let the hardware - * deal with things. - */ - intval |= ATH9K_BEACON_ENA; - if (!(ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)) - sc->imask |= ATH9K_INT_SWBA; - ath_beaconq_config(sc); - } else if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) { - if (nexttbtt == intval) - intval |= ATH9K_BEACON_RESET_TSF; - /* - * In AP mode we enable the beacon timers and - * SWBA interrupts to prepare beacon frames. - */ - intval |= ATH9K_BEACON_ENA; - sc->imask |= ATH9K_INT_SWBA; - ath_beaconq_config(sc); - } + DPRINTF(sc, ATH_DBG_BEACON, + "IBSS nexttbtt %u intval %u (%u)\n", + nexttbtt, intval, conf->beacon_interval); - ath9k_hw_beaconinit(ah, nexttbtt, intval); - sc->beacon.bmisscnt = 0; - ath9k_hw_set_interrupts(ah, sc->imask); + /* + * In IBSS mode enable the beacon timers but only enable SWBA interrupts + * if we need to manually prepare beacon frames. Otherwise we use a + * self-linked tx descriptor and let the hardware deal with things. + */ + intval |= ATH9K_BEACON_ENA; + if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)) + sc->imask |= ATH9K_INT_SWBA; - /* - * When using a self-linked beacon descriptor in - * ibss mode load it once here. - */ - if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC && - (ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)) - ath_beacon_start_adhoc(sc, 0); - } + ath_beaconq_config(sc); + + /* Set the computed ADHOC beacon timers */ + + ath9k_hw_set_interrupts(sc->sc_ah, 0); + ath9k_hw_beaconinit(sc->sc_ah, nexttbtt, intval); + sc->beacon.bmisscnt = 0; + ath9k_hw_set_interrupts(sc->sc_ah, sc->imask); + + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL) + ath_beacon_start_adhoc(sc, 0); } -void ath_beacon_sync(struct ath_softc *sc, int if_id) +void ath_beacon_config(struct ath_softc *sc, int if_id) { - /* - * Resync beacon timers using the tsf of the - * beacon frame we just received. - */ - ath_beacon_config(sc, if_id); - sc->sc_flags |= SC_OP_BEACONS; + struct ath_beacon_config conf; + struct ath_vif *avp; + struct ieee80211_vif *vif; + + /* Setup the beacon configuration parameters */ + + memset(&conf, 0, sizeof(struct ath_beacon_config)); + conf.beacon_interval = sc->hw->conf.beacon_int ? + sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; + conf.listen_interval = 1; + conf.dtim_period = conf.beacon_interval; + conf.dtim_count = 1; + conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval; + + if (if_id != ATH_IF_ID_ANY) { + vif = sc->vifs[if_id]; + avp = (struct ath_vif *)vif->drv_priv; + + switch(avp->av_opmode) { + case NL80211_IFTYPE_AP: + ath_beacon_config_ap(sc, &conf, avp); + break; + case NL80211_IFTYPE_ADHOC: + ath_beacon_config_adhoc(sc, &conf, avp); + break; + case NL80211_IFTYPE_STATION: + ath_beacon_config_sta(sc, &conf, avp); + break; + default: + DPRINTF(sc, ATH_DBG_CONFIG, + "Unsupported beaconing mode\n"); + return; + } + + sc->sc_flags |= SC_OP_BEACONS; + } } diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 94297b6d69fb..9e8f954877c9 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -926,7 +926,6 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc, /* Configure the beacon */ ath_beacon_config(sc, 0); - sc->sc_flags |= SC_OP_BEACONS; /* Reset rssi stats */ sc->nodestats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER; @@ -2365,7 +2364,7 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, if (error != 0) return error; - ath_beacon_sync(sc, 0); + ath_beacon_config(sc, 0); } }