From: Bill Pemberton Date: Tue, 17 Mar 2009 02:07:46 +0000 (-0400) Subject: Staging: comedi: Remove C99 style comments in adl_pci9111.c X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=52f8ac983079ad6bba3c055152a39ccc5e76350a;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git Staging: comedi: Remove C99 style comments in adl_pci9111.c Signed-off-by: Bill Pemberton Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c index 1e040827fd18..b4a61c560c5b 100644 --- a/drivers/staging/comedi/drivers/adl_pci9111.c +++ b/drivers/staging/comedi/drivers/adl_pci9111.c @@ -85,7 +85,7 @@ TODO: #define PCI9111_DRIVER_NAME "adl_pci9111" #define PCI9111_HR_DEVICE_ID 0x9111 -// TODO: Add other pci9111 board id +/* TODO: Add other pci9111 board id */ #define PCI9111_IO_RANGE 0x0100 @@ -133,11 +133,11 @@ TODO: /* IO address map */ -#define PCI9111_REGISTER_AD_FIFO_VALUE 0x00 // AD Data stored in FIFO +#define PCI9111_REGISTER_AD_FIFO_VALUE 0x00 /* AD Data stored in FIFO */ #define PCI9111_REGISTER_DA_OUTPUT 0x00 #define PCI9111_REGISTER_DIGITAL_IO 0x02 #define PCI9111_REGISTER_EXTENDED_IO_PORTS 0x04 -#define PCI9111_REGISTER_AD_CHANNEL_CONTROL 0x06 // Channel selection +#define PCI9111_REGISTER_AD_CHANNEL_CONTROL 0x06 /* Channel selection */ #define PCI9111_REGISTER_AD_CHANNEL_READBACK 0x06 #define PCI9111_REGISTER_INPUT_SIGNAL_RANGE 0x08 #define PCI9111_REGISTER_RANGE_STATUS_READBACK 0x08 @@ -261,9 +261,7 @@ TODO: outb(data & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_2); \ outb( (data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_2) -// -// Function prototypes -// +/* Function prototypes */ static int pci9111_attach(struct comedi_device * dev, struct comedi_devconfig * it); static int pci9111_detach(struct comedi_device * dev); @@ -284,27 +282,27 @@ static const struct comedi_lrange pci9111_hr_ai_range = { static DEFINE_PCI_DEVICE_TABLE(pci9111_pci_table) = { {PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - //{ PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + /* { PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */ {0} }; MODULE_DEVICE_TABLE(pci, pci9111_pci_table); -// -// Board specification structure -// +/* */ +/* Board specification structure */ +/* */ struct pci9111_board { - const char *name; // driver name + const char *name; /* driver name */ int device_id; - int ai_channel_nbr; // num of A/D chans - int ao_channel_nbr; // num of D/A chans - int ai_resolution; // resolution of A/D + int ai_channel_nbr; /* num of A/D chans */ + int ao_channel_nbr; /* num of D/A chans */ + int ai_resolution; /* resolution of A/D */ int ai_resolution_mask; - int ao_resolution; // resolution of D/A + int ao_resolution; /* resolution of D/A */ int ao_resolution_mask; - const struct comedi_lrange *ai_range_list; // rangelist for A/D - const struct comedi_lrange *ao_range_list; // rangelist for D/A + const struct comedi_lrange *ai_range_list; /* rangelist for A/D */ + const struct comedi_lrange *ao_range_list; /* rangelist for D/A */ unsigned int ai_acquisition_period_min_ns; }; @@ -335,15 +333,13 @@ static struct comedi_driver pci9111_driver = { COMEDI_PCI_INITCLEANUP(pci9111_driver, pci9111_pci_table); -// -// Private data structure -// +/* Private data structure */ struct pci9111_private_data { struct pci_dev *pci_device; - unsigned long io_range; // PCI6503 io range + unsigned long io_range; /* PCI6503 io range */ - unsigned long lcr_io_base; // Local configuration register base address + unsigned long lcr_io_base; /* Local configuration register base address */ unsigned long lcr_io_range; int stop_counter; @@ -354,23 +350,21 @@ struct pci9111_private_data { unsigned int chunk_counter; unsigned int chunk_num_samples; - int ao_readback; // Last written analog output data + int ao_readback; /* Last written analog output data */ - int timer_divisor_1; // Divisor values for the 8254 timer pacer + int timer_divisor_1; /* Divisor values for the 8254 timer pacer */ int timer_divisor_2; - int is_valid; // Is device valid + int is_valid; /* Is device valid */ short ai_bounce_buffer[2 * PCI9111_FIFO_HALF_SIZE]; }; #define dev_private ((struct pci9111_private_data *)dev->private) -// ------------------------------------------------------------------ -// -// PLX9050 SECTION -// -// ------------------------------------------------------------------ +/* ------------------------------------------------------------------ */ +/* PLX9050 SECTION */ +/* ------------------------------------------------------------------ */ #define PLX9050_REGISTER_INTERRUPT_CONTROL 0x4c @@ -405,15 +399,11 @@ static void plx9050_interrupt_control(unsigned long io_base, outb(flags, io_base + PLX9050_REGISTER_INTERRUPT_CONTROL); } -// ------------------------------------------------------------------ -// -// MISCELLANEOUS SECTION -// -// ------------------------------------------------------------------ +/* ------------------------------------------------------------------ */ +/* MISCELLANEOUS SECTION */ +/* ------------------------------------------------------------------ */ -// -// 8254 timer -// +/* 8254 timer */ static void pci9111_timer_set(struct comedi_device * dev) { @@ -494,13 +484,13 @@ enum pci9111_ISC0_sources { irq_on_fifo_half_full }; -typedef enum { +enum pci9111_ISC1_sources { irq_on_timer_tick, irq_on_external_trigger -} pci9111_ISC1_sources; +}; static void pci9111_interrupt_source_set(struct comedi_device * dev, - enum pci9111_ISC0_sources irq_0_source, pci9111_ISC1_sources irq_1_source) + enum pci9111_ISC0_sources irq_0_source, enum pci9111_ISC1_sources irq_1_source) { int flags; @@ -515,21 +505,17 @@ static void pci9111_interrupt_source_set(struct comedi_device * dev, pci9111_interrupt_and_fifo_set(flags); } -// ------------------------------------------------------------------ -// -// HARDWARE TRIGGERED ANALOG INPUT SECTION -// -// ------------------------------------------------------------------ +/* ------------------------------------------------------------------ */ +/* HARDWARE TRIGGERED ANALOG INPUT SECTION */ +/* ------------------------------------------------------------------ */ -// -// Cancel analog input autoscan -// +/* Cancel analog input autoscan */ #undef AI_DO_CMD_DEBUG static int pci9111_ai_cancel(struct comedi_device * dev, struct comedi_subdevice * s) { - // Disable interrupts + /* Disable interrupts */ plx9050_interrupt_control(dev_private->lcr_io_base, true, true, true, true, false); @@ -547,9 +533,7 @@ static int pci9111_ai_cancel(struct comedi_device * dev, struct comedi_subdevice return 0; } -// -// Test analog input command -// +/* Test analog input command */ #define pci9111_check_trigger_src(src,flags) \ tmp = src; \ @@ -566,7 +550,7 @@ pci9111_ai_do_cmd_test(struct comedi_device * dev, int i; struct pci9111_board *board = (struct pci9111_board *) dev->board_ptr; - // Step 1 : check if trigger are trivialy valid + /* Step 1 : check if trigger are trivialy valid */ pci9111_check_trigger_src(cmd->start_src, TRIG_NOW); pci9111_check_trigger_src(cmd->scan_begin_src, @@ -578,7 +562,7 @@ pci9111_ai_do_cmd_test(struct comedi_device * dev, if (error) return 1; - // step 2 : make sure trigger sources are unique and mutually compatible + /* step 2 : make sure trigger sources are unique and mutually compatible */ if (cmd->start_src != TRIG_NOW) error++; @@ -610,7 +594,7 @@ pci9111_ai_do_cmd_test(struct comedi_device * dev, if (error) return 2; - // Step 3 : make sure arguments are trivialy compatible + /* Step 3 : make sure arguments are trivialy compatible */ if (cmd->chanlist_len < 1) { cmd->chanlist_len = 1; @@ -669,7 +653,7 @@ pci9111_ai_do_cmd_test(struct comedi_device * dev, if (error) return 3; - // Step 4 : fix up any arguments + /* Step 4 : fix up any arguments */ if (cmd->convert_src == TRIG_TIMER) { tmp = cmd->convert_arg; @@ -680,8 +664,8 @@ pci9111_ai_do_cmd_test(struct comedi_device * dev, if (tmp != cmd->convert_arg) error++; } - // There's only one timer on this card, so the scan_begin timer must - // be a multiple of chanlist_len*convert_arg + /* There's only one timer on this card, so the scan_begin timer must */ + /* be a multiple of chanlist_len*convert_arg */ if (cmd->scan_begin_src == TRIG_TIMER) { @@ -710,7 +694,7 @@ pci9111_ai_do_cmd_test(struct comedi_device * dev, if (error) return 4; - // Step 5 : check channel list + /* Step 5 : check channel list */ if (cmd->chanlist) { @@ -754,9 +738,7 @@ pci9111_ai_do_cmd_test(struct comedi_device * dev, } -// -// Analog input command -// +/* Analog input command */ static int pci9111_ai_do_cmd(struct comedi_device * dev, struct comedi_subdevice * subdevice) { @@ -767,12 +749,9 @@ static int pci9111_ai_do_cmd(struct comedi_device * dev, struct comedi_subdevice "no irq assigned for PCI9111, cannot do hardware conversion"); return -1; } - // Set channel scan limit - // - // PCI9111 allows only scanning from channel 0 to channel n - // - // TODO: handle the case of an external multiplexer - // + /* Set channel scan limit */ + /* PCI9111 allows only scanning from channel 0 to channel n */ + /* TODO: handle the case of an external multiplexer */ if (async_cmd->chanlist_len > 1) { pci9111_ai_channel_set((async_cmd->chanlist_len) - 1); @@ -782,10 +761,8 @@ static int pci9111_ai_do_cmd(struct comedi_device * dev, struct comedi_subdevice pci9111_autoscan_set(dev, false); } - // Set gain - // - // This is the same gain on every channel - // + /* Set gain */ + /* This is the same gain on every channel */ pci9111_ai_range_set(CR_RANGE(async_cmd->chanlist[0])); @@ -808,7 +785,7 @@ static int pci9111_ai_do_cmd(struct comedi_device * dev, struct comedi_subdevice return -1; } - // Set timer pacer + /* Set timer pacer */ dev_private->scan_delay = 0; switch (async_cmd->convert_src) { @@ -901,11 +878,9 @@ static void pci9111_ai_munge(struct comedi_device * dev, struct comedi_subdevice } } -// ------------------------------------------------------------------ -// -// INTERRUPT SECTION -// -// ------------------------------------------------------------------ +/* ------------------------------------------------------------------ */ +/* INTERRUPT SECTION */ +/* ------------------------------------------------------------------ */ #undef INTERRUPT_DEBUG @@ -918,8 +893,8 @@ static irqreturn_t pci9111_interrupt(int irq, void *p_device PT_REGS_ARG) unsigned char intcsr; if (!dev->attached) { - // Ignore interrupt before device fully attached. - // Might not even have allocated subdevices yet! + /* Ignore interrupt before device fully attached. */ + /* Might not even have allocated subdevices yet! */ return IRQ_NONE; } @@ -927,7 +902,7 @@ static irqreturn_t pci9111_interrupt(int irq, void *p_device PT_REGS_ARG) comedi_spin_lock_irqsave(&dev->spinlock, irq_flags); - // Check if we are source of interrupt + /* Check if we are source of interrupt */ intcsr = inb(dev_private->lcr_io_base + PLX9050_REGISTER_INTERRUPT_CONTROL); if (!(((intcsr & PLX9050_PCI_INTERRUPT_ENABLE) != 0) @@ -941,15 +916,15 @@ static irqreturn_t pci9111_interrupt(int irq, void *p_device PT_REGS_ARG) == (PLX9050_LINTI2_ENABLE | PLX9050_LINTI2_STATUS))))) { - // Not the source of the interrupt. - // (N.B. not using PLX9050_SOFTWARE_INTERRUPT) + /* Not the source of the interrupt. */ + /* (N.B. not using PLX9050_SOFTWARE_INTERRUPT) */ comedi_spin_unlock_irqrestore(&dev->spinlock, irq_flags); return IRQ_NONE; } if ((intcsr & (PLX9050_LINTI1_ENABLE | PLX9050_LINTI1_STATUS)) == (PLX9050_LINTI1_ENABLE | PLX9050_LINTI1_STATUS)) { - // Interrupt comes from fifo_half-full signal + /* Interrupt comes from fifo_half-full signal */ if (pci9111_is_fifo_full()) { comedi_spin_unlock_irqrestore(&dev->spinlock, @@ -1059,15 +1034,11 @@ static irqreturn_t pci9111_interrupt(int irq, void *p_device PT_REGS_ARG) return IRQ_HANDLED; } -// ------------------------------------------------------------------ -// -// INSTANT ANALOG INPUT OUTPUT SECTION -// -// ------------------------------------------------------------------ +/* ------------------------------------------------------------------ */ +/* INSTANT ANALOG INPUT OUTPUT SECTION */ +/* ------------------------------------------------------------------ */ -// -// analog instant input -// +/* analog instant input */ #undef AI_INSN_DEBUG @@ -1126,9 +1097,7 @@ static int pci9111_ai_insn_read(struct comedi_device * dev, return i; } -// -// Analog instant output -// +/* Analog instant output */ static int pci9111_ao_insn_write(struct comedi_device * dev, @@ -1144,9 +1113,7 @@ pci9111_ao_insn_write(struct comedi_device * dev, return i; } -// -// Analog output readback -// +/* Analog output readback */ static int pci9111_ao_insn_read(struct comedi_device * dev, struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data) @@ -1160,15 +1127,11 @@ static int pci9111_ao_insn_read(struct comedi_device * dev, return i; } -// ------------------------------------------------------------------ -// -// DIGITAL INPUT OUTPUT SECTION -// -// ------------------------------------------------------------------ +/* ------------------------------------------------------------------ */ +/* DIGITAL INPUT OUTPUT SECTION */ +/* ------------------------------------------------------------------ */ -// -// Digital inputs -// +/* Digital inputs */ static int pci9111_di_insn_bits(struct comedi_device * dev, struct comedi_subdevice * subdevice, struct comedi_insn * insn, unsigned int * data) @@ -1181,18 +1144,16 @@ static int pci9111_di_insn_bits(struct comedi_device * dev, return 2; } -// -// Digital outputs -// +/* Digital outputs */ static int pci9111_do_insn_bits(struct comedi_device * dev, struct comedi_subdevice * subdevice, struct comedi_insn * insn, unsigned int * data) { unsigned int bits; - // Only set bits that have been masked - // data[0] = mask - // data[1] = bit state + /* Only set bits that have been masked */ + /* data[0] = mask */ + /* data[1] = bit state */ data[0] &= PCI9111_DO_MASK; @@ -1208,19 +1169,15 @@ static int pci9111_do_insn_bits(struct comedi_device * dev, return 2; } -// ------------------------------------------------------------------ -// -// INITIALISATION SECTION -// -// ------------------------------------------------------------------ +/* ------------------------------------------------------------------ */ +/* INITIALISATION SECTION */ +/* ------------------------------------------------------------------ */ -// -// Reset device -// +/* Reset device */ static int pci9111_reset(struct comedi_device * dev) { - // Set trigger source to software + /* Set trigger source to software */ plx9050_interrupt_control(dev_private->lcr_io_base, true, true, true, true, false); @@ -1229,7 +1186,7 @@ static int pci9111_reset(struct comedi_device * dev) pci9111_pretrigger_set(dev, false); pci9111_autoscan_set(dev, false); - // Reset 8254 chip + /* Reset 8254 chip */ dev_private->timer_divisor_1 = 0; dev_private->timer_divisor_2 = 0; @@ -1239,12 +1196,9 @@ static int pci9111_reset(struct comedi_device * dev) return 0; } -// -// Attach -// -// - Register PCI device -// - Declare device driver capability -// +/* Attach */ +/* - Register PCI device */ +/* - Declare device driver capability */ static int pci9111_attach(struct comedi_device * dev, struct comedi_devconfig * it) { @@ -1257,9 +1211,7 @@ static int pci9111_attach(struct comedi_device * dev, struct comedi_devconfig * if (alloc_private(dev, sizeof(struct pci9111_private_data)) < 0) { return -ENOMEM; } - // - // Probe the device to determine what device in the series it is. - // + /* Probe the device to determine what device in the series it is. */ printk("comedi%d: " PCI9111_DRIVER_NAME " driver\n", dev->minor); @@ -1271,10 +1223,10 @@ static int pci9111_attach(struct comedi_device * dev, struct comedi_devconfig * for (i = 0; i < pci9111_board_nbr; i++) { if (pci9111_boards[i].device_id == pci_device->device) { - // was a particular bus/slot requested? + /* was a particular bus/slot requested? */ if ((it->options[0] != 0) || (it->options[1] != 0)) { - // are we on the wrong bus/slot? + /* are we on the wrong bus/slot? */ if (pci_device->bus->number != it->options[0] || PCI_SLOT(pci_device-> @@ -1307,24 +1259,24 @@ static int pci9111_attach(struct comedi_device * dev, struct comedi_devconfig * PCI_SLOT(pci_device->devfn), PCI_FUNC(pci_device->devfn), pci_device->irq); - // TODO: Warn about non-tested boards. + /* TODO: Warn about non-tested boards. */ switch (board->device_id) { }; - // Read local configuration register base address [PCI_BASE_ADDRESS #1]. + /* Read local configuration register base address [PCI_BASE_ADDRESS #1]. */ lcr_io_base = pci_resource_start(pci_device, 1); lcr_io_range = pci_resource_len(pci_device, 1); printk("comedi%d: local configuration registers at address 0x%4lx [0x%4lx]\n", dev->minor, lcr_io_base, lcr_io_range); - // Enable PCI device and request regions + /* Enable PCI device and request regions */ if (comedi_pci_enable(pci_device, PCI9111_DRIVER_NAME) < 0) { printk("comedi%d: Failed to enable PCI device and request regions\n", dev->minor); return -EIO; } - // Read PCI6308 register base address [PCI_BASE_ADDRESS #2]. + /* Read PCI6308 register base address [PCI_BASE_ADDRESS #2]. */ io_base = pci_resource_start(pci_device, 2); io_range = pci_resource_len(pci_device, 2); @@ -1341,7 +1293,7 @@ static int pci9111_attach(struct comedi_device * dev, struct comedi_devconfig * pci9111_reset(dev); - // Irq setup + /* Irq setup */ dev->irq = 0; if (pci_device->irq > 0) { @@ -1355,9 +1307,7 @@ static int pci9111_attach(struct comedi_device * dev, struct comedi_devconfig * } dev->irq = pci_device->irq; - // - // TODO: Add external multiplexer setup (according to option[2]). - // + /* TODO: Add external multiplexer setup (according to option[2]). */ if ((error = alloc_subdevices(dev, 4)) < 0) return error; @@ -1368,12 +1318,9 @@ static int pci9111_attach(struct comedi_device * dev, struct comedi_devconfig * subdevice->type = COMEDI_SUBD_AI; subdevice->subdev_flags = SDF_READABLE | SDF_COMMON | SDF_CMD_READ; - // - // TODO: Add external multiplexer data - // - // if (devpriv->usemux) { subdevice->n_chan = devpriv->usemux; } - // else { subdevice->n_chan = this_board->n_aichan; } - // + /* TODO: Add external multiplexer data */ + /* if (devpriv->usemux) { subdevice->n_chan = devpriv->usemux; } */ + /* else { subdevice->n_chan = this_board->n_aichan; } */ subdevice->n_chan = board->ai_channel_nbr; subdevice->maxdata = board->ai_resolution_mask; @@ -1416,20 +1363,18 @@ static int pci9111_attach(struct comedi_device * dev, struct comedi_devconfig * return 0; } -// -// Detach -// +/* Detach */ static int pci9111_detach(struct comedi_device * dev) { - // Reset device + /* Reset device */ if (dev->private != 0) { if (dev_private->is_valid) pci9111_reset(dev); } - // Release previously allocated irq + /* Release previously allocated irq */ if (dev->irq != 0) { comedi_free_irq(dev->irq, dev);