From: Chris Wilson Date: Sun, 8 Aug 2010 09:15:59 +0000 (+0100) Subject: drm/i915: Fix offset page-flips on i965+ X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=52e68630d13f9668f8f4dd6978fa41039bacfaf6;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git drm/i915: Fix offset page-flips on i965+ i965 uses the Display Registers to compute the offset from the display base so the new base does not need adjusting when flipping. The older chipsets use a fence to access the display and so do perceive the surface as linear and have a single base register which is reprogrammed using the flip. Signed-off-by: Chris Wilson Cc: Jesse Barnes Reported-by: Marty Jack Reviewed-by: Jesse Barnes --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3fc767bcbaa0..334665cbe7df 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5042,9 +5042,9 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_unpin_work *work; unsigned long flags, offset; - int pipesrc_reg = (intel_crtc->pipe == 0) ? PIPEASRC : PIPEBSRC; - int ret, pipesrc; - u32 flip_mask; + int pipe = intel_crtc->pipe; + u32 pf, pipesrc; + int ret; work = kzalloc(sizeof *work, GFP_KERNEL); if (work == NULL) @@ -5093,12 +5093,14 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, atomic_inc(&obj_priv->pending_flip); work->pending_flip_obj = obj; - if (intel_crtc->plane) - flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; - else - flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; - if (IS_GEN3(dev) || IS_GEN2(dev)) { + u32 flip_mask; + + if (intel_crtc->plane) + flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; + else + flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; + BEGIN_LP_RING(2); OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); OUT_RING(0); @@ -5106,29 +5108,56 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, } /* Offset into the new buffer for cases of shared fbs between CRTCs */ - offset = obj_priv->gtt_offset; - offset += (crtc->y * fb->pitch) + (crtc->x * (fb->bits_per_pixel) / 8); + offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8; BEGIN_LP_RING(4); - if (IS_I965G(dev)) { + switch(INTEL_INFO(dev)->gen) { + case 2: OUT_RING(MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitch); - OUT_RING(offset | obj_priv->tiling_mode); - pipesrc = I915_READ(pipesrc_reg); - OUT_RING(pipesrc & 0x0fff0fff); - } else if (IS_GEN3(dev)) { + OUT_RING(obj_priv->gtt_offset + offset); + OUT_RING(MI_NOOP); + break; + + case 3: OUT_RING(MI_DISPLAY_FLIP_I915 | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitch); - OUT_RING(offset); + OUT_RING(obj_priv->gtt_offset + offset); OUT_RING(MI_NOOP); - } else { + break; + + case 4: + case 5: + /* i965+ uses the linear or tiled offsets from the + * Display Registers (which do not change across a page-flip) + * so we need only reprogram the base address. + */ OUT_RING(MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitch); - OUT_RING(offset); - OUT_RING(MI_NOOP); + OUT_RING(obj_priv->gtt_offset | obj_priv->tiling_mode); + + /* XXX Enabling the panel-fitter across page-flip is so far + * untested on non-native modes, so ignore it for now. + * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; + */ + pf = 0; + pipesrc = I915_READ(pipe == 0 ? PIPEASRC : PIPEBSRC) & 0x0fff0fff; + OUT_RING(pf | pipesrc); + break; + + case 6: + OUT_RING(MI_DISPLAY_FLIP | + MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); + OUT_RING(fb->pitch | obj_priv->tiling_mode); + OUT_RING(obj_priv->gtt_offset); + + pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; + pipesrc = I915_READ(pipe == 0 ? PIPEASRC : PIPEBSRC) & 0x0fff0fff; + OUT_RING(pf | pipesrc); + break; } ADVANCE_LP_RING();