From: James Smart Date: Tue, 24 May 2011 15:42:45 +0000 (-0400) Subject: [SCSI] lpfc 8.3.24: Add request-firmware support X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=52d5244096017bbd11164479116baceaede342b0;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git [SCSI] lpfc 8.3.24: Add request-firmware support Add request-firmware support: - Add support for request_firmware interface for INTF2 SLI4 ports. - Add ability to reset SLI4 INTF2 ports. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 6ecd6daffc15..135a53baa735 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -755,18 +755,18 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr, } /** - * lpfc_sli4_fw_dump_request - Request firmware to perform a firmware dump + * lpfc_sli4_pdev_reg_request - Request physical dev to perform a register acc * @phba: lpfc_hba pointer. * * Description: - * Request SLI4 interface type-2 device to perform a dump of firmware dump - * object into it's /dbg directory of the flash file system. + * Request SLI4 interface type-2 device to perform a physical register set + * access. * * Returns: * zero for success **/ static ssize_t -lpfc_sli4_fw_dump_request(struct lpfc_hba *phba) +lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) { struct completion online_compl; uint32_t reg_val; @@ -776,6 +776,11 @@ lpfc_sli4_fw_dump_request(struct lpfc_hba *phba) if (!phba->cfg_enable_hba_reset) return -EIO; + if ((phba->sli_rev < LPFC_SLI_REV4) || + (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2)) + return -EPERM; + status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); if (status != 0) @@ -786,7 +791,14 @@ lpfc_sli4_fw_dump_request(struct lpfc_hba *phba) reg_val = readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET); - reg_val |= LPFC_FW_DUMP_REQUEST; + + if (opcode == LPFC_FW_DUMP) + reg_val |= LPFC_FW_DUMP_REQUEST; + else if (opcode == LPFC_FW_RESET) + reg_val |= LPFC_CTL_PDEV_CTL_FRST; + else if (opcode == LPFC_DV_RESET) + reg_val |= LPFC_CTL_PDEV_CTL_DRST; + writel(reg_val, phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET); /* flush */ @@ -904,12 +916,11 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, else status = lpfc_do_offline(phba, LPFC_EVT_KILL); else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0) - if ((phba->sli_rev < LPFC_SLI_REV4) || - (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != - LPFC_SLI_INTF_IF_TYPE_2)) - return -EPERM; - else - status = lpfc_sli4_fw_dump_request(phba); + status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_DUMP); + else if (strncmp(buf, "fw_reset", sizeof("fw_reset") - 1) == 0) + status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_RESET); + else if (strncmp(buf, "dv_reset", sizeof("dv_reset") - 1) == 0) + status = lpfc_sli4_pdev_reg_request(phba, LPFC_DV_RESET); else return -EINVAL; diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 3b9a6152b7f9..0b63cb2610d0 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -430,5 +430,6 @@ void lpfc_cleanup_wt_rrqs(struct lpfc_hba *); void lpfc_cleanup_vports_rrqs(struct lpfc_vport *, struct lpfc_nodelist *); struct lpfc_node_rrq *lpfc_get_active_rrq(struct lpfc_vport *, uint16_t, uint32_t); +int lpfc_wr_object(struct lpfc_hba *, struct list_head *, uint32_t, uint32_t *); /* functions to support SR-IOV */ int lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *, int); diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 115915d4a60a..61a40fd1ad18 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -821,6 +821,7 @@ struct mbox_header { #define LPFC_MBOX_OPCODE_MQ_CREATE_EXT 0x5A #define LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG 0xA0 #define LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG 0xA4 +#define LPFC_MBOX_OPCODE_WRITE_OBJECT 0xAC #define LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS 0xB5 /* FCoE Opcodes */ @@ -2372,6 +2373,29 @@ struct lpfc_mbx_get_prof_cfg { #define MB_CEQ_STATUS_QUEUE_FLUSHING 0x4 #define MB_CQE_STATUS_DMA_FAILED 0x5 +#define LPFC_MBX_WR_CONFIG_MAX_BDE 8 +struct lpfc_mbx_wr_object { + struct mbox_header header; + union { + struct { + uint32_t word4; +#define lpfc_wr_object_eof_SHIFT 31 +#define lpfc_wr_object_eof_MASK 0x00000001 +#define lpfc_wr_object_eof_WORD word4 +#define lpfc_wr_object_write_length_SHIFT 0 +#define lpfc_wr_object_write_length_MASK 0x00FFFFFF +#define lpfc_wr_object_write_length_WORD word4 + uint32_t write_offset; + uint32_t object_name[26]; + uint32_t bde_count; + struct ulp_bde64 bde[LPFC_MBX_WR_CONFIG_MAX_BDE]; + } request; + struct { + uint32_t actual_write_length; + } response; + } u; +}; + /* mailbox queue entry structure */ struct lpfc_mqe { uint32_t word0; @@ -2421,6 +2445,7 @@ struct lpfc_mqe { struct lpfc_mbx_get_func_cfg get_func_cfg; struct lpfc_mbx_get_prof_cfg get_prof_cfg; struct lpfc_mbx_nop nop; + struct lpfc_mbx_wr_object wr_object; } un; }; @@ -2966,9 +2991,28 @@ union lpfc_wqe { struct gen_req64_wqe gen_req; }; +#define LPFC_GROUP_OJECT_MAGIC_NUM 0xfeaa0001 +#define LPFC_FILE_TYPE_GROUP 0xf7 +#define LPFC_FILE_ID_GROUP 0xa2 +struct lpfc_grp_hdr { + uint32_t size; + uint32_t magic_number; + uint32_t word2; +#define lpfc_grp_hdr_file_type_SHIFT 24 +#define lpfc_grp_hdr_file_type_MASK 0x000000FF +#define lpfc_grp_hdr_file_type_WORD word2 +#define lpfc_grp_hdr_id_SHIFT 16 +#define lpfc_grp_hdr_id_MASK 0x000000FF +#define lpfc_grp_hdr_id_WORD word2 + uint8_t rev_name[128]; +}; + #define FCP_COMMAND 0x0 #define FCP_COMMAND_DATA_OUT 0x1 #define ELS_COMMAND_NON_FIP 0xC #define ELS_COMMAND_FIP 0xD #define OTHER_COMMAND 0x8 +#define LPFC_FW_DUMP 1 +#define LPFC_FW_RESET 2 +#define LPFC_DV_RESET 3 diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index e81912cd257e..2b535cff4b2a 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -8774,6 +8775,97 @@ lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba) return 0; } +/** + * lpfc_write_firmware - attempt to write a firmware image to the port + * @phba: pointer to lpfc hba data structure. + * @fw: pointer to firmware image returned from request_firmware. + * + * returns the number of bytes written if write is successful. + * returns a negative error value if there were errors. + * returns 0 if firmware matches currently active firmware on port. + **/ +int +lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw) +{ + char fwrev[32]; + struct lpfc_grp_hdr *image = (struct lpfc_grp_hdr *)fw->data; + struct list_head dma_buffer_list; + int i, rc = 0; + struct lpfc_dmabuf *dmabuf, *next; + uint32_t offset = 0, temp_offset = 0; + + INIT_LIST_HEAD(&dma_buffer_list); + if ((image->magic_number != LPFC_GROUP_OJECT_MAGIC_NUM) || + (bf_get(lpfc_grp_hdr_file_type, image) != LPFC_FILE_TYPE_GROUP) || + (bf_get(lpfc_grp_hdr_id, image) != LPFC_FILE_ID_GROUP) || + (image->size != fw->size)) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3022 Invalid FW image found. " + "Magic:%d Type:%x ID:%x\n", + image->magic_number, + bf_get(lpfc_grp_hdr_file_type, image), + bf_get(lpfc_grp_hdr_id, image)); + return -EINVAL; + } + lpfc_decode_firmware_rev(phba, fwrev, 1); + if (strncmp(fwrev, image->rev_name, strnlen(fwrev, 16))) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3023 Updating Firmware. Current Version:%s " + "New Version:%s\n", + fwrev, image->rev_name); + for (i = 0; i < LPFC_MBX_WR_CONFIG_MAX_BDE; i++) { + dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), + GFP_KERNEL); + if (!dmabuf) { + rc = -ENOMEM; + goto out; + } + dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev, + SLI4_PAGE_SIZE, + &dmabuf->phys, + GFP_KERNEL); + if (!dmabuf->virt) { + kfree(dmabuf); + rc = -ENOMEM; + goto out; + } + list_add_tail(&dmabuf->list, &dma_buffer_list); + } + while (offset < fw->size) { + temp_offset = offset; + list_for_each_entry(dmabuf, &dma_buffer_list, list) { + if (offset + SLI4_PAGE_SIZE > fw->size) { + temp_offset += fw->size - offset; + memcpy(dmabuf->virt, + fw->data + temp_offset, + fw->size - offset); + break; + } + temp_offset += SLI4_PAGE_SIZE; + memcpy(dmabuf->virt, fw->data + temp_offset, + SLI4_PAGE_SIZE); + } + rc = lpfc_wr_object(phba, &dma_buffer_list, + (fw->size - offset), &offset); + if (rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3024 Firmware update failed. " + "%d\n", rc); + goto out; + } + } + rc = offset; + } +out: + list_for_each_entry_safe(dmabuf, next, &dma_buffer_list, list) { + list_del(&dmabuf->list); + dma_free_coherent(&phba->pcidev->dev, SLI4_PAGE_SIZE, + dmabuf->virt, dmabuf->phys); + kfree(dmabuf); + } + return rc; +} + /** * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys * @pdev: pointer to PCI device @@ -8803,6 +8895,8 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) int mcnt; int adjusted_fcp_eq_count; int fcp_qidx; + const struct firmware *fw; + uint8_t file_name[16]; /* Allocate memory for HBA structure */ phba = lpfc_hba_alloc(pdev); @@ -8957,6 +9051,14 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) /* Perform post initialization setup */ lpfc_post_init_setup(phba); + /* check for firmware upgrade or downgrade */ + snprintf(file_name, 16, "%s.grp", phba->ModelName); + error = request_firmware(&fw, file_name, &phba->pcidev->dev); + if (!error) { + lpfc_write_firmware(phba, fw); + release_firmware(fw); + } + /* Check if there are static vports to be created. */ lpfc_create_static_vport(phba); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index dd911d6d0ee5..fcfa8c8cfb67 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -13499,6 +13499,96 @@ out: return; } +/** + * lpfc_wr_object - write an object to the firmware + * @phba: HBA structure that indicates port to create a queue on. + * @dmabuf_list: list of dmabufs to write to the port. + * @size: the total byte value of the objects to write to the port. + * @offset: the current offset to be used to start the transfer. + * + * This routine will create a wr_object mailbox command to send to the port. + * the mailbox command will be constructed using the dma buffers described in + * @dmabuf_list to create a list of BDEs. This routine will fill in as many + * BDEs that the imbedded mailbox can support. The @offset variable will be + * used to indicate the starting offset of the transfer and will also return + * the offset after the write object mailbox has completed. @size is used to + * determine the end of the object and whether the eof bit should be set. + * + * Return 0 is successful and offset will contain the the new offset to use + * for the next write. + * Return negative value for error cases. + **/ +int +lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list, + uint32_t size, uint32_t *offset) +{ + struct lpfc_mbx_wr_object *wr_object; + LPFC_MBOXQ_t *mbox; + int rc = 0, i = 0; + uint32_t shdr_status, shdr_add_status; + uint32_t mbox_tmo; + union lpfc_sli4_cfg_shdr *shdr; + struct lpfc_dmabuf *dmabuf; + uint32_t written = 0; + + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + + lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_WRITE_OBJECT, + sizeof(struct lpfc_mbx_wr_object) - + sizeof(struct lpfc_sli4_cfg_mhdr), LPFC_SLI4_MBX_EMBED); + + wr_object = (struct lpfc_mbx_wr_object *)&mbox->u.mqe.un.wr_object; + wr_object->u.request.write_offset = *offset; + sprintf((uint8_t *)wr_object->u.request.object_name, "/"); + wr_object->u.request.object_name[0] = + cpu_to_le32(wr_object->u.request.object_name[0]); + bf_set(lpfc_wr_object_eof, &wr_object->u.request, 0); + list_for_each_entry(dmabuf, dmabuf_list, list) { + if (i >= LPFC_MBX_WR_CONFIG_MAX_BDE || written >= size) + break; + wr_object->u.request.bde[i].addrLow = putPaddrLow(dmabuf->phys); + wr_object->u.request.bde[i].addrHigh = + putPaddrHigh(dmabuf->phys); + if (written + SLI4_PAGE_SIZE >= size) { + wr_object->u.request.bde[i].tus.f.bdeSize = + (size - written); + written += (size - written); + bf_set(lpfc_wr_object_eof, &wr_object->u.request, 1); + } else { + wr_object->u.request.bde[i].tus.f.bdeSize = + SLI4_PAGE_SIZE; + written += SLI4_PAGE_SIZE; + } + i++; + } + wr_object->u.request.bde_count = i; + bf_set(lpfc_wr_object_write_length, &wr_object->u.request, written); + if (!phba->sli4_hba.intr_enable) + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + else { + mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG); + rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); + } + /* The IOCTL status is embedded in the mailbox subheader. */ + shdr = (union lpfc_sli4_cfg_shdr *) &wr_object->header.cfg_shdr; + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); + if (rc != MBX_TIMEOUT) + mempool_free(mbox, phba->mbox_mem_pool); + if (shdr_status || shdr_add_status || rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3025 Write Object mailbox failed with " + "status x%x add_status x%x, mbx status x%x\n", + shdr_status, shdr_add_status, rc); + rc = -ENXIO; + } else + *offset += wr_object->u.response.actual_write_length; + return rc; +} + /** * lpfc_cleanup_pending_mbox - Free up vport discovery mailbox commands. * @vport: pointer to vport data structure.