From: Dean Luick Date: Thu, 8 Dec 2016 03:33:13 +0000 (-0800) Subject: IB/hfi1: Add special setting for low power AOC X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=5213006ade47153f5f2c2e5a42e84312afccabfd;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git IB/hfi1: Add special setting for low power AOC Low power QSFP AOC cables require a different SerDes Tx PLL bandwidth setting than the default. The 8051 firmware does not know the details, so the driver needs to tell the firmware through a special setting. Reviewed-by: Easwar Hariharan Signed-off-by: Dean Luick Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- diff --git a/drivers/infiniband/hw/hfi1/platform.c b/drivers/infiniband/hw/hfi1/platform.c index 0e7043801bb1..838fe84e285a 100644 --- a/drivers/infiniband/hw/hfi1/platform.c +++ b/drivers/infiniband/hw/hfi1/platform.c @@ -637,6 +637,38 @@ static void apply_tx_lanes(struct hfi1_pportdata *ppd, u8 field_id, } } +/* + * Return a special SerDes setting for low power AOC cables. The power class + * threshold and setting being used were all found by empirical testing. + * + * Summary of the logic: + * + * if (QSFP and QSFP_TYPE == AOC and QSFP_POWER_CLASS < 4) + * return 0xe + * return 0; // leave at default + */ +static u8 aoc_low_power_setting(struct hfi1_pportdata *ppd) +{ + u8 *cache = ppd->qsfp_info.cache; + int power_class; + + /* QSFP only */ + if (ppd->port_type != PORT_TYPE_QSFP) + return 0; /* leave at default */ + + /* active optical cables only */ + switch ((cache[QSFP_MOD_TECH_OFFS] & 0xF0) >> 4) { + case 0x0 ... 0x9: /* fallthrough */ + case 0xC: /* fallthrough */ + case 0xE: + /* active AOC */ + power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]); + if (power_class < QSFP_POWER_CLASS_4) + return 0xe; + } + return 0; /* leave at default */ +} + static void apply_tunings( struct hfi1_pportdata *ppd, u32 tx_preset_index, u8 tuning_method, u32 total_atten, u8 limiting_active) @@ -705,7 +737,17 @@ static void apply_tunings( tx_preset_index, TX_PRESET_TABLE_POSTCUR, &tx_preset, 4); postcur = tx_preset; - config_data = precur | (attn << 8) | (postcur << 16); + /* + * NOTES: + * o The aoc_low_power_setting is applied to all lanes even + * though only lane 0's value is examined by the firmware. + * o A lingering low power setting after a cable swap does + * not occur. On cable unplug the 8051 is reset and + * restarted on cable insert. This resets all settings to + * their default, erasing any previous low power setting. + */ + config_data = precur | (attn << 8) | (postcur << 16) | + (aoc_low_power_setting(ppd) << 24); apply_tx_lanes(ppd, TX_EQ_SETTINGS, config_data, "Applying TX settings");