From: Sascha Hauer Date: Wed, 28 Jan 2009 23:03:03 +0000 (+0000) Subject: fec: remove unused #else branches X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=51bbc3e31cb59d94b0c9c1ca3f1851b7f1787169;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git fec: remove unused #else branches The #else branches throughout this driver belong to a PowerPC 8xx for which this driver is not used. Signed-off-by: Sascha Hauer Acked-by: Greg Ungerer Signed-off-by: David S. Miller --- diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 7e33c129d51c..b754f600e44f 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -72,8 +72,6 @@ static unsigned int fec_hw[] = { (MCF_MBAR+0x30000), #elif defined(CONFIG_M532x) (MCF_MBAR+0xfc030000), -#else - &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec), #endif }; @@ -1760,96 +1758,6 @@ static void __inline__ fec_uncache(unsigned long addr) { } -/* ------------------------------------------------------------------------- */ - - -#else - -/* - * Code specific to the MPC860T setup. - */ -static void __inline__ fec_request_intrs(struct net_device *dev) -{ - volatile immap_t *immap; - - immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */ - - if (request_8xxirq(FEC_INTERRUPT, fec_enet_interrupt, 0, "fec", dev) != 0) - panic("Could not allocate FEC IRQ!"); -} - -static void __inline__ fec_get_mac(struct net_device *dev) -{ - bd_t *bd; - - bd = (bd_t *)__res; - memcpy(dev->dev_addr, bd->bi_enetaddr, ETH_ALEN); -} - -static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep) -{ - extern uint _get_IMMR(void); - volatile immap_t *immap; - volatile fec_t *fecp; - - fecp = fep->hwp; - immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */ - - /* Configure all of port D for MII. - */ - immap->im_ioport.iop_pdpar = 0x1fff; - - /* Bits moved from Rev. D onward. - */ - if ((_get_IMMR() & 0xffff) < 0x0501) - immap->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */ - else - immap->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */ - - /* Set MII speed to 2.5 MHz - */ - fecp->fec_mii_speed = fep->phy_speed = - ((bd->bi_busfreq * 1000000) / 2500000) & 0x7e; -} - -static void __inline__ fec_enable_phy_intr(void) -{ - volatile fec_t *fecp; - - fecp = fep->hwp; - - /* Enable MII command finished interrupt - */ - fecp->fec_ivec = (FEC_INTERRUPT/2) << 29; -} - -static void __inline__ fec_disable_phy_intr(void) -{ -} - -static void __inline__ fec_phy_ack_intr(void) -{ -} - -static void __inline__ fec_localhw_setup(void) -{ - volatile fec_t *fecp; - - fecp = fep->hwp; - fecp->fec_r_hash = PKT_MAXBUF_SIZE; - /* Enable big endian and don't care about SDMA FC. - */ - fecp->fec_fun_code = 0x78000000; -} - -static void __inline__ fec_uncache(unsigned long addr) -{ - pte_t *pte; - pte = va_to_pte(mem_addr); - pte_val(*pte) |= _PAGE_NO_CACHE; - flush_tlb_page(init_mm.mmap, mem_addr); -} - #endif /* ------------------------------------------------------------------------- */