From: Christophe Leroy Date: Thu, 4 Feb 2016 10:07:48 +0000 (+0100) Subject: powerpc/885: set SDCR to 0x40 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=501ea76687ef16a88a96cc9848e5d760f1c68e4e;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git powerpc/885: set SDCR to 0x40 The MPC885 reference manual says that SDCR shall have value 0x40, but most exemples set SDCR to 0x1 With 0x1 in SDCR, we observe TX underruns on SCC when using it in QMC mode. According the NXP technical support, this is a copy/paste error from MPC860 reference manual, 0x40 being the only value supported by the MPC885 HW. Signed-off-by: Christophe Leroy Signed-off-by: Scott Wood --- diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index 5e6ff38ea69f..8ed65365be50 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -228,7 +228,10 @@ void __init cpm_reset(void) * Bit 25, FAM can also be set to use FEC aggressive mode (860T). */ siu_conf = immr_map(im_siu_conf); - out_be32(&siu_conf->sc_sdcr, 1); + if ((mfspr(SPRN_IMMR) & 0xffff) == 0x0900) /* MPC885 */ + out_be32(&siu_conf->sc_sdcr, 0x40); + else + out_be32(&siu_conf->sc_sdcr, 1); immr_unmap(siu_conf); cpm_muram_init();