From: Benjamin Tissoires Date: Thu, 19 May 2016 16:24:06 +0000 (-0700) Subject: Input: add new driver for the Surface 3 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=4feacbc24eea0c5f36728017575cc0ad28d8758b;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git Input: add new driver for the Surface 3 This is a basic driver for the Surface 3. I am not so sure it will work with any firmwares as most values are encoded, but given that I only have access to my current device with its firmware and I don't have the datasheet, it should be OK for now. The Surface Pen is not supported (if it is supposed to be). I'll work on this when I get one. Tested-by: Bastien Nocera Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 75443bb568a6..c3880b9e4b61 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -1085,6 +1085,19 @@ config TOUCHSCREEN_SUR40 To compile this driver as a module, choose M here: the module will be called sur40. +config TOUCHSCREEN_SURFACE3_SPI + tristate "Ntrig/Microsoft Surface 3 SPI touchscreen" + depends on SPI + depends on GPIOLIB || COMPILE_TEST + help + Say Y here if you have the Ntrig/Microsoft SPI touchscreen + controller chip as found on the Surface 3 in your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called surface3_spi. + config TOUCHSCREEN_SX8654 tristate "Semtech SX8654 touchscreen" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 4b518c76e0d7..75af04d7db83 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -66,6 +66,7 @@ obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o obj-$(CONFIG_TOUCHSCREEN_SUN4I) += sun4i-ts.o obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o +obj-$(CONFIG_TOUCHSCREEN_SURFACE3_SPI) += surface3_spi.o obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o diff --git a/drivers/input/touchscreen/surface3_spi.c b/drivers/input/touchscreen/surface3_spi.c new file mode 100644 index 000000000000..e18e7425de8e --- /dev/null +++ b/drivers/input/touchscreen/surface3_spi.c @@ -0,0 +1,304 @@ +/* + * Driver for Ntrig/Microsoft Touchscreens over SPI + * + * Copyright (c) 2016 Red Hat Inc. + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define SURFACE3_PACKET_SIZE 264 + +struct surface3_ts_data { + struct spi_device *spi; + struct gpio_desc *gpiod_rst[2]; + struct input_dev *input_dev; + + u8 rd_buf[SURFACE3_PACKET_SIZE] ____cacheline_aligned; +}; + +struct surface3_ts_data_finger { + u8 status; + __le16 tracking_id; + __le16 x; + __le16 cx; + __le16 y; + __le16 cy; + __le16 width; + __le16 height; + u32 padding; +} __packed; + +static int surface3_spi_read(struct surface3_ts_data *ts_data) +{ + struct spi_device *spi = ts_data->spi; + + memset(ts_data->rd_buf, 0, sizeof(ts_data->rd_buf)); + return spi_read(spi, ts_data->rd_buf, sizeof(ts_data->rd_buf)); +} + +static void surface3_spi_report_touch(struct surface3_ts_data *ts_data, + struct surface3_ts_data_finger *finger) +{ + int st = finger->status & 0x01; + int slot; + + slot = input_mt_get_slot_by_key(ts_data->input_dev, + get_unaligned_le16(&finger->tracking_id)); + if (slot < 0) + return; + + input_mt_slot(ts_data->input_dev, slot); + input_mt_report_slot_state(ts_data->input_dev, MT_TOOL_FINGER, st); + if (st) { + input_report_abs(ts_data->input_dev, + ABS_MT_POSITION_X, + get_unaligned_le16(&finger->x)); + input_report_abs(ts_data->input_dev, + ABS_MT_POSITION_Y, + get_unaligned_le16(&finger->y)); + input_report_abs(ts_data->input_dev, + ABS_MT_WIDTH_MAJOR, + get_unaligned_le16(&finger->width)); + input_report_abs(ts_data->input_dev, + ABS_MT_WIDTH_MINOR, + get_unaligned_le16(&finger->height)); + } +} + +static void surface3_spi_process(struct surface3_ts_data *ts_data) +{ + const char header[] = {0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, + 0x01, 0xd2, 0x00, 0x80, 0x01, 0x03, 0x03}; + u8 *data = ts_data->rd_buf; + u16 timestamp; + unsigned int i; + + if (memcmp(header, data, sizeof(header))) + dev_err(&ts_data->spi->dev, + "%s header error: %*ph, ignoring...\n", + __func__, (int)sizeof(header), data); + + timestamp = get_unaligned_le16(&data[15]); + + for (i = 0; i < 13; i++) { + struct surface3_ts_data_finger *finger; + + finger = (struct surface3_ts_data_finger *)&data[17 + + i * sizeof(struct surface3_ts_data_finger)]; + + /* + * When bit 5 of status is 1, it marks the end of the report: + * - touch present: 0xe7 + * - touch released: 0xe4 + * - nothing valuable: 0xff + */ + if (finger->status & 0x10) + break; + + surface3_spi_report_touch(ts_data, finger); + } + + input_mt_sync_frame(ts_data->input_dev); + input_sync(ts_data->input_dev); +} + +static irqreturn_t surface3_spi_irq_handler(int irq, void *dev_id) +{ + struct surface3_ts_data *data = dev_id; + + if (surface3_spi_read(data)) + return IRQ_HANDLED; + + dev_dbg(&data->spi->dev, "%s received -> %*ph\n", + __func__, SURFACE3_PACKET_SIZE, data->rd_buf); + surface3_spi_process(data); + + return IRQ_HANDLED; +} + +static void surface3_spi_power(struct surface3_ts_data *data, bool on) +{ + gpiod_set_value(data->gpiod_rst[0], on); + gpiod_set_value(data->gpiod_rst[1], on); + /* let the device settle a little */ + msleep(20); +} + +/** + * surface3_spi_get_gpio_config - Get GPIO config from ACPI/DT + * + * @ts: surface3_spi_ts_data pointer + */ +static int surface3_spi_get_gpio_config(struct surface3_ts_data *data) +{ + int error; + struct device *dev; + struct gpio_desc *gpiod; + int i; + + dev = &data->spi->dev; + + /* Get the reset lines GPIO pin number */ + for (i = 0; i < 2; i++) { + gpiod = devm_gpiod_get_index(dev, NULL, i, GPIOD_OUT_LOW); + if (IS_ERR(gpiod)) { + error = PTR_ERR(gpiod); + if (error != -EPROBE_DEFER) + dev_err(dev, + "Failed to get power GPIO %d: %d\n", + i, + error); + return error; + } + + data->gpiod_rst[i] = gpiod; + } + + return 0; +} + +static int surface3_spi_create_input(struct surface3_ts_data *data) +{ + struct input_dev *input; + int error; + + input = devm_input_allocate_device(&data->spi->dev); + if (!input) + return -ENOMEM; + + data->input_dev = input; + + input_set_abs_params(input, ABS_MT_POSITION_X, 0, 9600, 0, 0); + input_abs_set_res(input, ABS_MT_POSITION_X, 40); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 7200, 0, 0); + input_abs_set_res(input, ABS_MT_POSITION_Y, 48); + input_set_abs_params(input, ABS_MT_WIDTH_MAJOR, 0, 1024, 0, 0); + input_set_abs_params(input, ABS_MT_WIDTH_MINOR, 0, 1024, 0, 0); + input_mt_init_slots(input, 10, INPUT_MT_DIRECT); + + input->name = "Surface3 SPI Capacitive TouchScreen"; + input->phys = "input/ts"; + input->id.bustype = BUS_SPI; + input->id.vendor = 0x045e; /* Microsoft */ + input->id.product = 0x0000; + input->id.version = 0x0000; + + error = input_register_device(input); + if (error) { + dev_err(&data->spi->dev, + "Failed to register input device: %d", error); + return error; + } + + return 0; +} + +static int surface3_spi_probe(struct spi_device *spi) +{ + struct surface3_ts_data *data; + int error; + + /* Set up SPI*/ + spi->bits_per_word = 8; + spi->mode = SPI_MODE_0; + error = spi_setup(spi); + if (error) + return error; + + data = devm_kzalloc(&spi->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->spi = spi; + spi_set_drvdata(spi, data); + + error = surface3_spi_get_gpio_config(data); + if (error) + return error; + + surface3_spi_power(data, true); + surface3_spi_power(data, false); + surface3_spi_power(data, true); + + error = surface3_spi_create_input(data); + if (error) + return error; + + error = devm_request_threaded_irq(&spi->dev, spi->irq, + NULL, surface3_spi_irq_handler, + IRQF_ONESHOT, + "Surface3-irq", data); + if (error) + return error; + + return 0; +} + +static int __maybe_unused surface3_spi_suspend(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct surface3_ts_data *data = spi_get_drvdata(spi); + + disable_irq(data->spi->irq); + + surface3_spi_power(data, false); + + return 0; +} + +static int __maybe_unused surface3_spi_resume(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct surface3_ts_data *data = spi_get_drvdata(spi); + + surface3_spi_power(data, true); + + enable_irq(data->spi->irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(surface3_spi_pm_ops, + surface3_spi_suspend, + surface3_spi_resume); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id surface3_spi_acpi_match[] = { + { "MSHW0037", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, surface3_spi_acpi_match); +#endif + +static struct spi_driver surface3_spi_driver = { + .driver = { + .name = "Surface3-spi", + .acpi_match_table = ACPI_PTR(surface3_spi_acpi_match), + .pm = &surface3_spi_pm_ops, + }, + .probe = surface3_spi_probe, +}; + +module_spi_driver(surface3_spi_driver); + +MODULE_AUTHOR("Benjamin Tissoires "); +MODULE_DESCRIPTION("Surface 3 SPI touchscreen driver"); +MODULE_LICENSE("GPL v2");