From: Bartlomiej Zolnierkiewicz Date: Fri, 1 Feb 2008 22:09:21 +0000 (+0100) Subject: ide-cd: kill CDROM_CONFIG_FLAGS() macro X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=4fe6717862d4977b8e61307a2623ed7739068bdc;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git ide-cd: kill CDROM_CONFIG_FLAGS() macro While at it rename 'info' variable to 'cd' in ide_cdrom_probe_capabilities() and ide_cdrom_setup(). Signed-off-by: Bartlomiej Zolnierkiewicz --- diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 81247a0587e6..3e1923d0bec1 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -657,8 +657,8 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, /* Set up the controller registers. */ ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL | IDE_TFLAG_NO_SELECT_MASK, xferlen, info->dma); - - if (CDROM_CONFIG_FLAGS (drive)->drq_interrupt) { + + if (info->config_flags.drq_interrupt) { /* waiting for CDB interrupt, not DMA yet. */ if (info->dma) drive->waiting_for_dma = 0; @@ -694,7 +694,7 @@ static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive, struct cdrom_info *info = drive->driver_data; ide_startstop_t startstop; - if (CDROM_CONFIG_FLAGS(drive)->drq_interrupt) { + if (info->config_flags.drq_interrupt) { /* Here we should have been called after receiving an interrupt from the device. DRQ should how be set. */ @@ -893,11 +893,11 @@ static ide_startstop_t cdrom_read_intr (ide_drive_t *drive) if ((len % SECTOR_SIZE) != 0) { printk (KERN_ERR "%s: cdrom_read_intr: Bad transfer size %d\n", drive->name, len); - if (CDROM_CONFIG_FLAGS(drive)->limit_nframes) + if (info->config_flags.limit_nframes) printk (KERN_ERR " This drive is not supported by this version of the driver\n"); else { printk (KERN_ERR " Trying to limit transfer sizes\n"); - CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1; + info->config_flags.limit_nframes = 1; } cdrom_end_request(drive, 0); return ide_stopped; @@ -1073,7 +1073,8 @@ static ide_startstop_t cdrom_seek_intr (ide_drive_t *drive) if (cdrom_decode_status(drive, 0, &stat)) return ide_stopped; - CDROM_CONFIG_FLAGS(drive)->seeking = 1; + + info->config_flags.seeking = 1; if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) { if (--retry == 0) { @@ -1721,7 +1722,7 @@ ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block) struct cdrom_info *info = drive->driver_data; if (blk_fs_request(rq)) { - if (CDROM_CONFIG_FLAGS(drive)->seeking) { + if (info->config_flags.seeking) { unsigned long elapsed = jiffies - info->start_seek; int stat = HWIF(drive)->INB(IDE_STATUS_REG); @@ -1732,7 +1733,7 @@ ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block) } printk (KERN_ERR "%s: DSC timeout\n", drive->name); } - CDROM_CONFIG_FLAGS(drive)->seeking = 0; + info->config_flags.seeking = 0; } if ((rq_data_dir(rq) == READ) && IDE_LARGE_SEEK(info->last_block, block, IDECD_SEEK_THRESHOLD) && drive->dsc_overlap) { action = cdrom_start_seek(drive, block); @@ -1844,6 +1845,7 @@ static int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense) static int cdrom_lockdoor(ide_drive_t *drive, int lockflag, struct request_sense *sense) { + struct cdrom_info *cd = drive->driver_data; struct request_sense my_sense; struct request req; int stat; @@ -1852,7 +1854,7 @@ cdrom_lockdoor(ide_drive_t *drive, int lockflag, struct request_sense *sense) sense = &my_sense; /* If the drive cannot lock the door, just pretend. */ - if (CDROM_CONFIG_FLAGS(drive)->no_doorlock) { + if (cd->config_flags.no_doorlock) { stat = 0; } else { cdrom_prepare_request(drive, &req); @@ -1869,7 +1871,7 @@ cdrom_lockdoor(ide_drive_t *drive, int lockflag, struct request_sense *sense) (sense->asc == 0x24 || sense->asc == 0x20)) { printk (KERN_ERR "%s: door locking not supported\n", drive->name); - CDROM_CONFIG_FLAGS(drive)->no_doorlock = 1; + cd->config_flags.no_doorlock = 1; stat = 0; } @@ -1894,9 +1896,9 @@ static int cdrom_eject(ide_drive_t *drive, int ejectflag, struct request req; char loej = 0x02; - if (CDROM_CONFIG_FLAGS(drive)->no_eject && !ejectflag) + if (cd->config_flags.no_eject && !ejectflag) return -EDRIVE_CANT_DO_THIS; - + /* reload fails on some drives, if the tray is locked */ if (CDROM_STATE_FLAGS(drive)->door_locked && ejectflag) return 0; @@ -2019,7 +2021,7 @@ static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense) return stat; #if ! STANDARD_ATAPI - if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd) { + if (info->config_flags.toctracks_as_bcd) { toc->hdr.first_track = bcd2bin(toc->hdr.first_track); toc->hdr.last_track = bcd2bin(toc->hdr.last_track); } @@ -2059,7 +2061,7 @@ static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense) return stat; } #if ! STANDARD_ATAPI - if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd) { + if (info->config_flags.toctracks_as_bcd) { toc->hdr.first_track = bin2bcd(CDROM_LEADOUT); toc->hdr.last_track = bin2bcd(CDROM_LEADOUT); } else @@ -2076,7 +2078,7 @@ static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense) toc->hdr.toc_length = ntohs (toc->hdr.toc_length); #if ! STANDARD_ATAPI - if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd) { + if (info->config_flags.toctracks_as_bcd) { toc->hdr.first_track = bcd2bin(toc->hdr.first_track); toc->hdr.last_track = bcd2bin(toc->hdr.last_track); } @@ -2084,8 +2086,8 @@ static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense) for (i=0; i<=ntracks; i++) { #if ! STANDARD_ATAPI - if (CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd) { - if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd) + if (info->config_flags.tocaddr_as_bcd) { + if (info->config_flags.toctracks_as_bcd) toc->ent[i].track = bcd2bin(toc->ent[i].track); msf_from_bcd(&toc->ent[i].addr.msf); } @@ -2110,7 +2112,7 @@ static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense) } #if ! STANDARD_ATAPI - if (CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd) { + if (info->config_flags.tocaddr_as_bcd) { /* Re-read multisession information using MSF format */ stat = cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp, sizeof(ms_tmp), sense); @@ -2419,6 +2421,7 @@ int ide_cdrom_get_capabilities(ide_drive_t *drive, struct atapi_capabilities_pag static void ide_cdrom_update_speed (ide_drive_t *drive, struct atapi_capabilities_page *cap) { + struct cdrom_info *cd = drive->driver_data; u16 curspeed, maxspeed; /* The ACER/AOpen 24X cdrom has the speed fields byte-swapped */ @@ -2432,7 +2435,7 @@ void ide_cdrom_update_speed (ide_drive_t *drive, struct atapi_capabilities_page } CDROM_STATE_FLAGS(drive)->current_speed = (curspeed + (176/2)) / 176; - CDROM_CONFIG_FLAGS(drive)->max_speed = (maxspeed + (176/2)) / 176; + cd->config_flags.max_speed = (maxspeed + (176/2)) / 176; } static @@ -2617,7 +2620,7 @@ static int ide_cdrom_register (ide_drive_t *drive, int nslots) devinfo->handle = drive; strcpy(devinfo->name, drive->name); - if (CDROM_CONFIG_FLAGS(drive)->no_speed_select) + if (info->config_flags.no_speed_select) devinfo->mask |= CDC_SELECT_SPEED; devinfo->disk = info->disk; @@ -2627,8 +2630,8 @@ static int ide_cdrom_register (ide_drive_t *drive, int nslots) static int ide_cdrom_probe_capabilities (ide_drive_t *drive) { - struct cdrom_info *info = drive->driver_data; - struct cdrom_device_info *cdi = &info->devinfo; + struct cdrom_info *cd = drive->driver_data; + struct cdrom_device_info *cdi = &cd->devinfo; struct atapi_capabilities_page cap; int nslots = 1; @@ -2642,9 +2645,9 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive) return nslots; } - if (CDROM_CONFIG_FLAGS(drive)->nec260 || + if (cd->config_flags.nec260 || !strcmp(drive->id->model,"STINGRAY 8422 IDE 8X CD-ROM 7-27-95")) { - CDROM_CONFIG_FLAGS(drive)->no_eject = 0; + cd->config_flags.no_eject = 0; cdi->mask &= ~CDC_PLAY_AUDIO; return nslots; } @@ -2663,9 +2666,9 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive) return 0; if (cap.lock == 0) - CDROM_CONFIG_FLAGS(drive)->no_doorlock = 1; + cd->config_flags.no_doorlock = 1; if (cap.eject) - CDROM_CONFIG_FLAGS(drive)->no_eject = 0; + cd->config_flags.no_eject = 0; if (cap.cd_r_write) cdi->mask &= ~CDC_CD_R; if (cap.cd_rw_write) @@ -2706,11 +2709,13 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive) } ide_cdrom_update_speed(drive, &cap); - /* don't print speed if the drive reported 0. - */ + printk(KERN_INFO "%s: ATAPI", drive->name); - if (CDROM_CONFIG_FLAGS(drive)->max_speed) - printk(" %dX", CDROM_CONFIG_FLAGS(drive)->max_speed); + + /* don't print speed if the drive reported 0 */ + if (cd->config_flags.max_speed) + printk(KERN_CONT " %dX", cd->config_flags.max_speed); + printk(KERN_CONT " %s", (cdi->mask & CDC_DVD) ? "CD-ROM" : "DVD-ROM"); if ((cdi->mask & CDC_DVD_R) == 0 || (cdi->mask & CDC_DVD_RAM) == 0) @@ -2824,8 +2829,8 @@ static int ide_cdrom_prep_fn(struct request_queue *q, struct request *rq) static int ide_cdrom_setup (ide_drive_t *drive) { - struct cdrom_info *info = drive->driver_data; - struct cdrom_device_info *cdi = &info->devinfo; + struct cdrom_info *cd = drive->driver_data; + struct cdrom_device_info *cdi = &cd->devinfo; int nslots; blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn); @@ -2839,21 +2844,20 @@ int ide_cdrom_setup (ide_drive_t *drive) CDROM_STATE_FLAGS(drive)->media_changed = 1; #if NO_DOOR_LOCKING - CDROM_CONFIG_FLAGS(drive)->no_doorlock = 1; + cd->config_flags.no_doorlock = 1; #endif if ((drive->id->config & 0x0060) == 0x20) - CDROM_CONFIG_FLAGS(drive)->drq_interrupt = 1; - CDROM_CONFIG_FLAGS(drive)->no_eject = 1; + cd->config_flags.drq_interrupt = 1; + cd->config_flags.no_eject = 1; /* limit transfer size per interrupt. */ /* a testament to the nice quality of Samsung drives... */ - if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-2430")) - CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1; - else if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-2432")) - CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1; + if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-2430") || + !strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-2432")) + cd->config_flags.limit_nframes = 1; /* the 3231 model does not support the SET_CD_SPEED command */ else if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-3231")) - CDROM_CONFIG_FLAGS(drive)->no_speed_select = 1; + cd->config_flags.no_speed_select = 1; #if ! STANDARD_ATAPI if (strcmp (drive->id->model, "V003S0DS") == 0 && @@ -2861,22 +2865,22 @@ int ide_cdrom_setup (ide_drive_t *drive) drive->id->fw_rev[6] <= '2') { /* Vertos 300. Some versions of this drive like to talk BCD. */ - CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd = 1; - CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd = 1; + cd->config_flags.toctracks_as_bcd = 1; + cd->config_flags.tocaddr_as_bcd = 1; } else if (strcmp (drive->id->model, "V006E0DS") == 0 && drive->id->fw_rev[4] == '1' && drive->id->fw_rev[6] <= '2') { /* Vertos 600 ESD. */ - CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd = 1; + cd->config_flags.toctracks_as_bcd = 1; } else if (strcmp(drive->id->model, "NEC CD-ROM DRIVE:260") == 0 && strncmp(drive->id->fw_rev, "1.01", 4) == 0) { /* FIXME */ /* Old NEC260 (not R). This drive was released before the 1.2 version of the spec. */ - CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd = 1; - CDROM_CONFIG_FLAGS(drive)->nec260 = 1; + cd->config_flags.tocaddr_as_bcd = 1; + cd->config_flags.nec260 = 1; } /* * Sanyo 3 CD changer uses a non-standard command for CD changing @@ -2903,7 +2907,7 @@ int ide_cdrom_setup (ide_drive_t *drive) if (ide_cdrom_register(drive, nslots)) { printk (KERN_ERR "%s: ide_cdrom_setup failed to register device with the cdrom driver.\n", drive->name); - info->devinfo.handle = NULL; + cd->devinfo.handle = NULL; return 1; } ide_cdrom_add_settings(drive); diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index b989c9835174..9e1cee69c0fc 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -68,9 +68,7 @@ struct ide_cd_config_flags { __u8 no_speed_select : 1; /* SET_CD_SPEED command is unsupported. */ byte max_speed; /* Max speed of the drive */ }; -#define CDROM_CONFIG_FLAGS(drive) (&(((struct cdrom_info *)(drive->driver_data))->config_flags)) - /* State flags. These give information about the current state of the drive, and will change during normal operation. */ struct ide_cd_state_flags {