From: Anup Patel Date: Mon, 28 Mar 2016 04:48:27 +0000 (+0530) Subject: phy: Add support for NS2 SATA3 PHY in Broadcom SATA3 PHY driver X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=4faee9a43d0af2943195cdbde93c59d03984b749;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git phy: Add support for NS2 SATA3 PHY in Broadcom SATA3 PHY driver This patch adds support for Broadcom NS2 SATA3 PHY in existing Broadcom SATA3 PHY driver. Signed-off-by: Anup Patel Acked-by: Florian Fainelli Signed-off-by: Kishon Vijay Abraham I --- diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 46bb2c2075d8..a72d73cdaef3 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -403,15 +403,6 @@ config PHY_TUSB1210 help Support for TI TUSB1210 USB ULPI PHY. -config PHY_CYGNUS_PCIE - tristate "Broadcom Cygnus PCIe PHY driver" - depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) - select GENERIC_PHY - default ARCH_BCM_CYGNUS - help - Enable this to support the Broadcom Cygnus PCIe PHY. - If unsure, say N. - config PHY_BRCM_SATA tristate "Broadcom SATA PHY driver" depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST @@ -421,4 +412,14 @@ config PHY_BRCM_SATA help Enable this to support the Broadcom SATA PHY. If unsure, say N. + +config PHY_CYGNUS_PCIE + tristate "Broadcom Cygnus PCIe PHY driver" + depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) + select GENERIC_PHY + default ARCH_BCM_CYGNUS + help + Enable this to support the Broadcom Cygnus PCIe PHY. + If unsure, say N. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 596fae9b95d0..f03fa1fdf322 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -49,6 +49,6 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o +obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o -obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o diff --git a/drivers/phy/phy-brcm-sata.c b/drivers/phy/phy-brcm-sata.c index c97b9d6ff3e8..6c4c5cb791ca 100644 --- a/drivers/phy/phy-brcm-sata.c +++ b/drivers/phy/phy-brcm-sata.c @@ -14,6 +14,7 @@ * GNU General Public License for more details. */ +#include #include #include #include @@ -24,22 +25,26 @@ #include #include -#define SATA_MDIO_BANK_OFFSET 0x23c -#define SATA_MDIO_REG_OFFSET(ofs) ((ofs) * 4) +#define SATA_PCB_BANK_OFFSET 0x23c +#define SATA_PCB_REG_OFFSET(ofs) ((ofs) * 4) #define MAX_PORTS 2 /* Register offset between PHYs in PCB space */ -#define SATA_MDIO_REG_28NM_SPACE_SIZE 0x1000 +#define SATA_PCB_REG_28NM_SPACE_SIZE 0x1000 /* The older SATA PHY registers duplicated per port registers within the map, * rather than having a separate map per port. */ -#define SATA_MDIO_REG_40NM_SPACE_SIZE 0x10 +#define SATA_PCB_REG_40NM_SPACE_SIZE 0x10 + +/* Register offset between PHYs in PHY control space */ +#define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE 0x8 enum brcm_sata_phy_version { - BRCM_SATA_PHY_28NM, - BRCM_SATA_PHY_40NM, + BRCM_SATA_PHY_STB_28NM, + BRCM_SATA_PHY_STB_40NM, + BRCM_SATA_PHY_IPROC_NS2, }; struct brcm_sata_port { @@ -52,15 +57,48 @@ struct brcm_sata_port { struct brcm_sata_phy { struct device *dev; void __iomem *phy_base; + void __iomem *ctrl_base; enum brcm_sata_phy_version version; struct brcm_sata_port phys[MAX_PORTS]; }; -enum sata_mdio_phy_regs { - PLL_REG_BANK_0 = 0x50, +enum sata_phy_regs { + BLOCK0_REG_BANK = 0x000, + BLOCK0_XGXSSTATUS = 0x81, + BLOCK0_XGXSSTATUS_PLL_LOCK = BIT(12), + BLOCK0_SPARE = 0x8d, + BLOCK0_SPARE_OOB_CLK_SEL_MASK = 0x3, + BLOCK0_SPARE_OOB_CLK_SEL_REFBY2 = 0x1, + + PLL_REG_BANK_0 = 0x050, PLL_REG_BANK_0_PLLCONTROL_0 = 0x81, + PLL1_REG_BANK = 0x060, + PLL1_ACTRL2 = 0x82, + PLL1_ACTRL3 = 0x83, + PLL1_ACTRL4 = 0x84, + + OOB_REG_BANK = 0x150, + OOB_CTRL1 = 0x80, + OOB_CTRL1_BURST_MAX_MASK = 0xf, + OOB_CTRL1_BURST_MAX_SHIFT = 12, + OOB_CTRL1_BURST_MIN_MASK = 0xf, + OOB_CTRL1_BURST_MIN_SHIFT = 8, + OOB_CTRL1_WAKE_IDLE_MAX_MASK = 0xf, + OOB_CTRL1_WAKE_IDLE_MAX_SHIFT = 4, + OOB_CTRL1_WAKE_IDLE_MIN_MASK = 0xf, + OOB_CTRL1_WAKE_IDLE_MIN_SHIFT = 0, + OOB_CTRL2 = 0x81, + OOB_CTRL2_SEL_ENA_SHIFT = 15, + OOB_CTRL2_SEL_ENA_RC_SHIFT = 14, + OOB_CTRL2_RESET_IDLE_MAX_MASK = 0x3f, + OOB_CTRL2_RESET_IDLE_MAX_SHIFT = 8, + OOB_CTRL2_BURST_CNT_MASK = 0x3, + OOB_CTRL2_BURST_CNT_SHIFT = 6, + OOB_CTRL2_RESET_IDLE_MIN_MASK = 0x3f, + OOB_CTRL2_RESET_IDLE_MIN_SHIFT = 0, + TXPMD_REG_BANK = 0x1a0, TXPMD_CONTROL1 = 0x81, TXPMD_CONTROL1_TX_SSC_EN_FRC = BIT(0), @@ -72,69 +110,183 @@ enum sata_mdio_phy_regs { TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff, }; -static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port) +enum sata_phy_ctrl_regs { + PHY_CTRL_1 = 0x0, + PHY_CTRL_1_RESET = BIT(0), +}; + +static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port) { struct brcm_sata_phy *priv = port->phy_priv; - u32 offset = 0; + u32 size = 0; + + switch (priv->version) { + case BRCM_SATA_PHY_STB_28NM: + case BRCM_SATA_PHY_IPROC_NS2: + size = SATA_PCB_REG_28NM_SPACE_SIZE; + break; + case BRCM_SATA_PHY_STB_40NM: + size = SATA_PCB_REG_40NM_SPACE_SIZE; + break; + default: + dev_err(priv->dev, "invalid phy version\n"); + break; + }; - if (priv->version == BRCM_SATA_PHY_28NM) - offset = SATA_MDIO_REG_28NM_SPACE_SIZE; - else if (priv->version == BRCM_SATA_PHY_40NM) - offset = SATA_MDIO_REG_40NM_SPACE_SIZE; - else + return priv->phy_base + (port->portnum * size); +} + +static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port) +{ + struct brcm_sata_phy *priv = port->phy_priv; + u32 size = 0; + + switch (priv->version) { + case BRCM_SATA_PHY_IPROC_NS2: + size = SATA_PHY_CTRL_REG_28NM_SPACE_SIZE; + break; + default: dev_err(priv->dev, "invalid phy version\n"); + break; + }; - return priv->phy_base + (port->portnum * offset); + return priv->ctrl_base + (port->portnum * size); } -static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs, - u32 msk, u32 value) +static void brcm_sata_phy_wr(void __iomem *pcb_base, u32 bank, + u32 ofs, u32 msk, u32 value) { u32 tmp; - writel(bank, addr + SATA_MDIO_BANK_OFFSET); - tmp = readl(addr + SATA_MDIO_REG_OFFSET(ofs)); + writel(bank, pcb_base + SATA_PCB_BANK_OFFSET); + tmp = readl(pcb_base + SATA_PCB_REG_OFFSET(ofs)); tmp = (tmp & msk) | value; - writel(tmp, addr + SATA_MDIO_REG_OFFSET(ofs)); + writel(tmp, pcb_base + SATA_PCB_REG_OFFSET(ofs)); +} + +static u32 brcm_sata_phy_rd(void __iomem *pcb_base, u32 bank, u32 ofs) +{ + writel(bank, pcb_base + SATA_PCB_BANK_OFFSET); + return readl(pcb_base + SATA_PCB_REG_OFFSET(ofs)); } /* These defaults were characterized by H/W group */ -#define FMIN_VAL_DEFAULT 0x3df -#define FMAX_VAL_DEFAULT 0x3df -#define FMAX_VAL_SSC 0x83 +#define STB_FMIN_VAL_DEFAULT 0x3df +#define STB_FMAX_VAL_DEFAULT 0x3df +#define STB_FMAX_VAL_SSC 0x83 -static void brcm_sata_cfg_ssc(struct brcm_sata_port *port) +static int brcm_stb_sata_init(struct brcm_sata_port *port) { - void __iomem *base = brcm_sata_phy_base(port); + void __iomem *base = brcm_sata_pcb_base(port); struct brcm_sata_phy *priv = port->phy_priv; u32 tmp; /* override the TX spread spectrum setting */ tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC; - brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp); + brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp); /* set fixed min freq */ - brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2, - ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK, - FMIN_VAL_DEFAULT); + brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2, + ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK, + STB_FMIN_VAL_DEFAULT); /* set fixed max freq depending on SSC config */ if (port->ssc_en) { - dev_info(priv->dev, "enabling SSC on port %d\n", port->portnum); - tmp = FMAX_VAL_SSC; + dev_info(priv->dev, "enabling SSC on port%d\n", port->portnum); + tmp = STB_FMAX_VAL_SSC; } else { - tmp = FMAX_VAL_DEFAULT; + tmp = STB_FMAX_VAL_DEFAULT; } - brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3, + brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3, ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp); + + return 0; +} + +/* NS2 SATA PLL1 defaults were characterized by H/W group */ +#define NS2_PLL1_ACTRL2_MAGIC 0x1df8 +#define NS2_PLL1_ACTRL3_MAGIC 0x2b00 +#define NS2_PLL1_ACTRL4_MAGIC 0x8824 + +static int brcm_ns2_sata_init(struct brcm_sata_port *port) +{ + int try; + unsigned int val; + void __iomem *base = brcm_sata_pcb_base(port); + void __iomem *ctrl_base = brcm_sata_ctrl_base(port); + struct device *dev = port->phy_priv->dev; + + /* Configure OOB control */ + val = 0x0; + val |= (0xc << OOB_CTRL1_BURST_MAX_SHIFT); + val |= (0x4 << OOB_CTRL1_BURST_MIN_SHIFT); + val |= (0x9 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT); + val |= (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT); + brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val); + val = 0x0; + val |= (0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT); + val |= (0x2 << OOB_CTRL2_BURST_CNT_SHIFT); + val |= (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT); + brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val); + + /* Configure PHY PLL register bank 1 */ + val = NS2_PLL1_ACTRL2_MAGIC; + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val); + val = NS2_PLL1_ACTRL3_MAGIC; + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val); + val = NS2_PLL1_ACTRL4_MAGIC; + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val); + + /* Configure PHY BLOCK0 register bank */ + /* Set oob_clk_sel to refclk/2 */ + brcm_sata_phy_wr(base, BLOCK0_REG_BANK, BLOCK0_SPARE, + ~BLOCK0_SPARE_OOB_CLK_SEL_MASK, + BLOCK0_SPARE_OOB_CLK_SEL_REFBY2); + + /* Strobe PHY reset using PHY control register */ + writel(PHY_CTRL_1_RESET, ctrl_base + PHY_CTRL_1); + mdelay(1); + writel(0x0, ctrl_base + PHY_CTRL_1); + mdelay(1); + + /* Wait for PHY PLL lock by polling pll_lock bit */ + try = 50; + while (try) { + val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK, + BLOCK0_XGXSSTATUS); + if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) + break; + msleep(20); + try--; + } + if (!try) { + /* PLL did not lock; give up */ + dev_err(dev, "port%d PLL did not lock\n", port->portnum); + return -ETIMEDOUT; + } + + dev_dbg(dev, "port%d initialized\n", port->portnum); + + return 0; } static int brcm_sata_phy_init(struct phy *phy) { + int rc; struct brcm_sata_port *port = phy_get_drvdata(phy); - brcm_sata_cfg_ssc(port); + switch (port->phy_priv->version) { + case BRCM_SATA_PHY_STB_28NM: + case BRCM_SATA_PHY_STB_40NM: + rc = brcm_stb_sata_init(port); + break; + case BRCM_SATA_PHY_IPROC_NS2: + rc = brcm_ns2_sata_init(port); + break; + default: + rc = -ENODEV; + }; return 0; } @@ -146,9 +298,11 @@ static const struct phy_ops phy_ops = { static const struct of_device_id brcm_sata_phy_of_match[] = { { .compatible = "brcm,bcm7445-sata-phy", - .data = (void *)BRCM_SATA_PHY_28NM }, + .data = (void *)BRCM_SATA_PHY_STB_28NM }, { .compatible = "brcm,bcm7425-sata-phy", - .data = (void *)BRCM_SATA_PHY_40NM }, + .data = (void *)BRCM_SATA_PHY_STB_40NM }, + { .compatible = "brcm,iproc-ns2-sata-phy", + .data = (void *)BRCM_SATA_PHY_IPROC_NS2 }, {}, }; MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match); @@ -181,7 +335,15 @@ static int brcm_sata_phy_probe(struct platform_device *pdev) if (of_id) priv->version = (enum brcm_sata_phy_version)of_id->data; else - priv->version = BRCM_SATA_PHY_28NM; + priv->version = BRCM_SATA_PHY_STB_28NM; + + if (priv->version == BRCM_SATA_PHY_IPROC_NS2) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "phy-ctrl"); + priv->ctrl_base = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->ctrl_base)) + return PTR_ERR(priv->ctrl_base); + } for_each_available_child_of_node(dn, child) { unsigned int id;