From: H Hartley Sweeten Date: Tue, 3 Jul 2012 01:11:23 +0000 (-0700) Subject: staging: comedi: dmm32at: remove forward declarations 1 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=4f793db33dc3bab1b77a540386a662fbfd595e08;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git staging: comedi: dmm32at: remove forward declarations 1 Move the attach/detach functions as well as the boardinfo variable to remove the need to most of the forward declarations. Add some whitespace to the boardinfo during the move. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c index ad7fef915395..9c3d322d0e39 100644 --- a/drivers/staging/comedi/drivers/dmm32at.c +++ b/drivers/staging/comedi/drivers/dmm32at.c @@ -175,19 +175,6 @@ struct dmm32at_board { int have_dio; int dio_chans; }; -static const struct dmm32at_board dmm32at_boards[] = { - { - .name = "dmm32at", - .ai_chans = 32, - .ai_bits = 16, - .ai_ranges = &dmm32at_airanges, - .ao_chans = 4, - .ao_bits = 12, - .ao_ranges = &dmm32at_aoranges, - .have_dio = 1, - .dio_chans = 24, - }, -}; /* this structure is for data unique to this hardware driver. If * several hardware drivers keep similar information in this structure, @@ -212,197 +199,9 @@ struct dmm32at_private { #define devpriv ((struct dmm32at_private *)dev->private) /* prototypes for driver functions below */ -static int dmm32at_ai_rinsn(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int dmm32at_ao_winsn(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int dmm32at_ao_rinsn(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int dmm32at_dio_insn_bits(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data); -static int dmm32at_dio_insn_config(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data); -static int dmm32at_ai_cmdtest(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_cmd *cmd); -static int dmm32at_ai_cmd(struct comedi_device *dev, - struct comedi_subdevice *s); -static int dmm32at_ai_cancel(struct comedi_device *dev, - struct comedi_subdevice *s); static int dmm32at_ns_to_timer(unsigned int *ns, int round); -static irqreturn_t dmm32at_isr(int irq, void *d); void dmm32at_setaitimer(struct comedi_device *dev, unsigned int nansec); -/* - * Attach is called by the Comedi core to configure the driver - * for a particular board. If you specified a board_name array - * in the driver structure, dev->board_ptr contains that - * address. - */ -static int dmm32at_attach(struct comedi_device *dev, - struct comedi_devconfig *it) -{ - const struct dmm32at_board *board = comedi_board(dev); - int ret; - struct comedi_subdevice *s; - unsigned char aihi, ailo, fifostat, aistat, intstat, airback; - unsigned long iobase; - unsigned int irq; - - iobase = it->options[0]; - irq = it->options[1]; - - printk(KERN_INFO "comedi%d: dmm32at: attaching\n", dev->minor); - printk(KERN_DEBUG "dmm32at: probing at address 0x%04lx, irq %u\n", - iobase, irq); - - /* register address space */ - if (!request_region(iobase, DMM32AT_MEMSIZE, board->name)) { - printk(KERN_ERR "comedi%d: dmm32at: I/O port conflict\n", - dev->minor); - return -EIO; - } - dev->iobase = iobase; - - /* the following just makes sure the board is there and gets - it to a known state */ - - /* reset the board */ - dmm_outb(dev, DMM32AT_CNTRL, DMM32AT_RESET); - - /* allow a millisecond to reset */ - udelay(1000); - - /* zero scan and fifo control */ - dmm_outb(dev, DMM32AT_FIFOCNTRL, 0x0); - - /* zero interrupt and clock control */ - dmm_outb(dev, DMM32AT_INTCLOCK, 0x0); - - /* write a test channel range, the high 3 bits should drop */ - dmm_outb(dev, DMM32AT_AILOW, 0x80); - dmm_outb(dev, DMM32AT_AIHIGH, 0xff); - - /* set the range at 10v unipolar */ - dmm_outb(dev, DMM32AT_AICONF, DMM32AT_RANGE_U10); - - /* should take 10 us to settle, here's a hundred */ - udelay(100); - - /* read back the values */ - ailo = dmm_inb(dev, DMM32AT_AILOW); - aihi = dmm_inb(dev, DMM32AT_AIHIGH); - fifostat = dmm_inb(dev, DMM32AT_FIFOSTAT); - aistat = dmm_inb(dev, DMM32AT_AISTAT); - intstat = dmm_inb(dev, DMM32AT_INTCLOCK); - airback = dmm_inb(dev, DMM32AT_AIRBACK); - - printk(KERN_DEBUG "dmm32at: lo=0x%02x hi=0x%02x fifostat=0x%02x\n", - ailo, aihi, fifostat); - printk(KERN_DEBUG - "dmm32at: aistat=0x%02x intstat=0x%02x airback=0x%02x\n", - aistat, intstat, airback); - - if ((ailo != 0x00) || (aihi != 0x1f) || (fifostat != 0x80) || - (aistat != 0x60 || (intstat != 0x00) || airback != 0x0c)) { - printk(KERN_ERR "dmmat32: board detection failed\n"); - return -EIO; - } - - /* board is there, register interrupt */ - if (irq) { - ret = request_irq(irq, dmm32at_isr, 0, board->name, dev); - if (ret < 0) { - printk(KERN_ERR "dmm32at: irq conflict\n"); - return ret; - } - dev->irq = irq; - } - - dev->board_name = board->name; - -/* - * Allocate the private structure area. alloc_private() is a - * convenient macro defined in comedidev.h. - */ - if (alloc_private(dev, sizeof(struct dmm32at_private)) < 0) - return -ENOMEM; - - ret = comedi_alloc_subdevices(dev, 3); - if (ret) - return ret; - - s = dev->subdevices + 0; - dev->read_subdev = s; - /* analog input subdevice */ - s->type = COMEDI_SUBD_AI; - /* we support single-ended (ground) and differential */ - s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ; - s->n_chan = board->ai_chans; - s->maxdata = (1 << board->ai_bits) - 1; - s->range_table = board->ai_ranges; - s->len_chanlist = 32; /* This is the maximum chanlist length that - the board can handle */ - s->insn_read = dmm32at_ai_rinsn; - s->do_cmd = dmm32at_ai_cmd; - s->do_cmdtest = dmm32at_ai_cmdtest; - s->cancel = dmm32at_ai_cancel; - - s = dev->subdevices + 1; - /* analog output subdevice */ - s->type = COMEDI_SUBD_AO; - s->subdev_flags = SDF_WRITABLE; - s->n_chan = board->ao_chans; - s->maxdata = (1 << board->ao_bits) - 1; - s->range_table = board->ao_ranges; - s->insn_write = dmm32at_ao_winsn; - s->insn_read = dmm32at_ao_rinsn; - - s = dev->subdevices + 2; - /* digital i/o subdevice */ - if (board->have_dio) { - - /* get access to the DIO regs */ - dmm_outb(dev, DMM32AT_CNTRL, DMM32AT_DIOACC); - /* set the DIO's to the defualt input setting */ - devpriv->dio_config = DMM32AT_DIRA | DMM32AT_DIRB | - DMM32AT_DIRCL | DMM32AT_DIRCH | DMM32AT_DIENABLE; - dmm_outb(dev, DMM32AT_DIOCONF, devpriv->dio_config); - - /* set up the subdevice */ - s->type = COMEDI_SUBD_DIO; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE; - s->n_chan = board->dio_chans; - s->maxdata = 1; - s->state = 0; - s->range_table = &range_digital; - s->insn_bits = dmm32at_dio_insn_bits; - s->insn_config = dmm32at_dio_insn_config; - } else { - s->type = COMEDI_SUBD_UNUSED; - } - - /* success */ - printk(KERN_INFO "comedi%d: dmm32at: attached\n", dev->minor); - - return 1; - -} - -static void dmm32at_detach(struct comedi_device *dev) -{ - if (dev->irq) - free_irq(dev->irq, dev); - if (dev->iobase) - release_region(dev->iobase, DMM32AT_MEMSIZE); -} - /* * "instructions" read/write data in "one-shot" or "software-triggered" * mode. @@ -990,6 +789,178 @@ void dmm32at_setaitimer(struct comedi_device *dev, unsigned int nansec) } +static int dmm32at_attach(struct comedi_device *dev, + struct comedi_devconfig *it) +{ + const struct dmm32at_board *board = comedi_board(dev); + int ret; + struct comedi_subdevice *s; + unsigned char aihi, ailo, fifostat, aistat, intstat, airback; + unsigned long iobase; + unsigned int irq; + + iobase = it->options[0]; + irq = it->options[1]; + + printk(KERN_INFO "comedi%d: dmm32at: attaching\n", dev->minor); + printk(KERN_DEBUG "dmm32at: probing at address 0x%04lx, irq %u\n", + iobase, irq); + + /* register address space */ + if (!request_region(iobase, DMM32AT_MEMSIZE, board->name)) { + printk(KERN_ERR "comedi%d: dmm32at: I/O port conflict\n", + dev->minor); + return -EIO; + } + dev->iobase = iobase; + + /* the following just makes sure the board is there and gets + it to a known state */ + + /* reset the board */ + dmm_outb(dev, DMM32AT_CNTRL, DMM32AT_RESET); + + /* allow a millisecond to reset */ + udelay(1000); + + /* zero scan and fifo control */ + dmm_outb(dev, DMM32AT_FIFOCNTRL, 0x0); + + /* zero interrupt and clock control */ + dmm_outb(dev, DMM32AT_INTCLOCK, 0x0); + + /* write a test channel range, the high 3 bits should drop */ + dmm_outb(dev, DMM32AT_AILOW, 0x80); + dmm_outb(dev, DMM32AT_AIHIGH, 0xff); + + /* set the range at 10v unipolar */ + dmm_outb(dev, DMM32AT_AICONF, DMM32AT_RANGE_U10); + + /* should take 10 us to settle, here's a hundred */ + udelay(100); + + /* read back the values */ + ailo = dmm_inb(dev, DMM32AT_AILOW); + aihi = dmm_inb(dev, DMM32AT_AIHIGH); + fifostat = dmm_inb(dev, DMM32AT_FIFOSTAT); + aistat = dmm_inb(dev, DMM32AT_AISTAT); + intstat = dmm_inb(dev, DMM32AT_INTCLOCK); + airback = dmm_inb(dev, DMM32AT_AIRBACK); + + printk(KERN_DEBUG "dmm32at: lo=0x%02x hi=0x%02x fifostat=0x%02x\n", + ailo, aihi, fifostat); + printk(KERN_DEBUG + "dmm32at: aistat=0x%02x intstat=0x%02x airback=0x%02x\n", + aistat, intstat, airback); + + if ((ailo != 0x00) || (aihi != 0x1f) || (fifostat != 0x80) || + (aistat != 0x60 || (intstat != 0x00) || airback != 0x0c)) { + printk(KERN_ERR "dmmat32: board detection failed\n"); + return -EIO; + } + + /* board is there, register interrupt */ + if (irq) { + ret = request_irq(irq, dmm32at_isr, 0, board->name, dev); + if (ret < 0) { + printk(KERN_ERR "dmm32at: irq conflict\n"); + return ret; + } + dev->irq = irq; + } + + dev->board_name = board->name; + +/* + * Allocate the private structure area. alloc_private() is a + * convenient macro defined in comedidev.h. + */ + if (alloc_private(dev, sizeof(struct dmm32at_private)) < 0) + return -ENOMEM; + + ret = comedi_alloc_subdevices(dev, 3); + if (ret) + return ret; + + s = dev->subdevices + 0; + dev->read_subdev = s; + /* analog input subdevice */ + s->type = COMEDI_SUBD_AI; + /* we support single-ended (ground) and differential */ + s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ; + s->n_chan = board->ai_chans; + s->maxdata = (1 << board->ai_bits) - 1; + s->range_table = board->ai_ranges; + s->len_chanlist = 32; /* This is the maximum chanlist length that + the board can handle */ + s->insn_read = dmm32at_ai_rinsn; + s->do_cmd = dmm32at_ai_cmd; + s->do_cmdtest = dmm32at_ai_cmdtest; + s->cancel = dmm32at_ai_cancel; + + s = dev->subdevices + 1; + /* analog output subdevice */ + s->type = COMEDI_SUBD_AO; + s->subdev_flags = SDF_WRITABLE; + s->n_chan = board->ao_chans; + s->maxdata = (1 << board->ao_bits) - 1; + s->range_table = board->ao_ranges; + s->insn_write = dmm32at_ao_winsn; + s->insn_read = dmm32at_ao_rinsn; + + s = dev->subdevices + 2; + /* digital i/o subdevice */ + if (board->have_dio) { + + /* get access to the DIO regs */ + dmm_outb(dev, DMM32AT_CNTRL, DMM32AT_DIOACC); + /* set the DIO's to the defualt input setting */ + devpriv->dio_config = DMM32AT_DIRA | DMM32AT_DIRB | + DMM32AT_DIRCL | DMM32AT_DIRCH | DMM32AT_DIENABLE; + dmm_outb(dev, DMM32AT_DIOCONF, devpriv->dio_config); + + /* set up the subdevice */ + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = board->dio_chans; + s->maxdata = 1; + s->state = 0; + s->range_table = &range_digital; + s->insn_bits = dmm32at_dio_insn_bits; + s->insn_config = dmm32at_dio_insn_config; + } else { + s->type = COMEDI_SUBD_UNUSED; + } + + /* success */ + printk(KERN_INFO "comedi%d: dmm32at: attached\n", dev->minor); + + return 1; + +} + +static void dmm32at_detach(struct comedi_device *dev) +{ + if (dev->irq) + free_irq(dev->irq, dev); + if (dev->iobase) + release_region(dev->iobase, DMM32AT_MEMSIZE); +} + +static const struct dmm32at_board dmm32at_boards[] = { + { + .name = "dmm32at", + .ai_chans = 32, + .ai_bits = 16, + .ai_ranges = &dmm32at_airanges, + .ao_chans = 4, + .ao_bits = 12, + .ao_ranges = &dmm32at_aoranges, + .have_dio = 1, + .dio_chans = 24, + }, +}; + static struct comedi_driver dmm32at_driver = { .driver_name = "dmm32at", .module = THIS_MODULE,