From: Axel Lin Date: Sun, 20 May 2012 02:36:17 +0000 (+0800) Subject: regulator: lp3972: Use regulator_list_voltage_table() X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=4f73ccad5ca0ce25d0fd73cf3b65975e93a45ce4;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git regulator: lp3972: Use regulator_list_voltage_table() Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- diff --git a/drivers/regulator/lp3972.c b/drivers/regulator/lp3972.c index de073df7d344..3cdc755d9b22 100644 --- a/drivers/regulator/lp3972.c +++ b/drivers/regulator/lp3972.c @@ -74,54 +74,40 @@ struct lp3972 { #define LP3972_OVER2_LDO4_EN BIT(4) #define LP3972_OVER1_S_EN BIT(2) -static const int ldo1_voltage_map[] = { - 1700, 1725, 1750, 1775, 1800, 1825, 1850, 1875, - 1900, 1925, 1950, 1975, 2000, +static const unsigned int ldo1_voltage_map[] = { + 1700000, 1725000, 1750000, 1775000, 1800000, 1825000, 1850000, 1875000, + 1900000, 1925000, 1950000, 1975000, 2000000, }; -static const int ldo23_voltage_map[] = { - 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500, - 2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300, +static const unsigned int ldo23_voltage_map[] = { + 1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000, + 2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000, }; -static const int ldo4_voltage_map[] = { - 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350, - 1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300, +static const unsigned int ldo4_voltage_map[] = { + 1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1350000, + 1400000, 1500000, 1800000, 1900000, 2500000, 2800000, 3000000, 3300000, }; -static const int ldo5_voltage_map[] = { - 0, 0, 0, 0, 0, 850, 875, 900, - 925, 950, 975, 1000, 1025, 1050, 1075, 1100, - 1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300, - 1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500, +static const unsigned int ldo5_voltage_map[] = { + 0, 0, 0, 0, 0, 850000, 875000, 900000, + 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000, + 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, + 1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000, }; -static const int buck1_voltage_map[] = { - 725, 750, 775, 800, 825, 850, 875, 900, - 925, 950, 975, 1000, 1025, 1050, 1075, 1100, - 1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300, - 1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500, +static const unsigned int buck1_voltage_map[] = { + 725000, 750000, 775000, 800000, 825000, 850000, 875000, 900000, + 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000, + 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, + 1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000, }; -static const int buck23_voltage_map[] = { - 0, 800, 850, 900, 950, 1000, 1050, 1100, - 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500, - 1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800, - 3000, 3300, -}; - -static const int *ldo_voltage_map[] = { - ldo1_voltage_map, - ldo23_voltage_map, - ldo23_voltage_map, - ldo4_voltage_map, - ldo5_voltage_map, -}; - -static const int *buck_voltage_map[] = { - buck1_voltage_map, - buck23_voltage_map, - buck23_voltage_map, +static const unsigned int buck23_voltage_map[] = { + 0, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000, + 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000, + 1550000, 1600000, 1650000, 1700000, 1800000, 1900000, 2500000, 2800000, + 3000000, 3300000, }; static const int ldo_output_enable_mask[] = { @@ -160,7 +146,6 @@ static const int buck_base_addr[] = { LP3972_B3TV_REG, }; -#define LP3972_LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[x]) #define LP3972_LDO_OUTPUT_ENABLE_MASK(x) (ldo_output_enable_mask[x]) #define LP3972_LDO_OUTPUT_ENABLE_REG(x) (ldo_output_enable_addr[x]) @@ -177,7 +162,6 @@ static const int buck_base_addr[] = { #define LP3972_LDO_VOL_MIN_IDX(x) (((x) == 4) ? 0x05 : 0x00) #define LP3972_LDO_VOL_MAX_IDX(x) ((x) ? (((x) == 4) ? 0x1f : 0x0f) : 0x0c) -#define LP3972_BUCK_VOL_VALUE_MAP(x) (buck_voltage_map[x]) #define LP3972_BUCK_VOL_ENABLE_REG(x) (buck_vol_enable_addr[x]) #define LP3972_BUCK_VOL1_REG(x) (buck_base_addr[x]) #define LP3972_BUCK_VOL_MASK 0x1f @@ -242,17 +226,6 @@ static int lp3972_set_bits(struct lp3972 *lp3972, u8 reg, u16 mask, u16 val) return ret; } -static int lp3972_ldo_list_voltage(struct regulator_dev *dev, unsigned index) -{ - int ldo = rdev_get_id(dev) - LP3972_LDO1; - - if (index < LP3972_LDO_VOL_MIN_IDX(ldo) || - index > LP3972_LDO_VOL_MAX_IDX(ldo)) - return -EINVAL; - - return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[index]; -} - static int lp3972_ldo_is_enabled(struct regulator_dev *dev) { struct lp3972 *lp3972 = rdev_get_drvdata(dev); @@ -294,7 +267,7 @@ static int lp3972_ldo_get_voltage(struct regulator_dev *dev) reg = lp3972_reg_read(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo)); val = (reg >> LP3972_LDO_VOL_CONTR_SHIFT(ldo)) & mask; - return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[val]; + return dev->desc->volt_table[val]; } static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev, @@ -337,7 +310,7 @@ static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev, } static struct regulator_ops lp3972_ldo_ops = { - .list_voltage = lp3972_ldo_list_voltage, + .list_voltage = regulator_list_voltage_table, .is_enabled = lp3972_ldo_is_enabled, .enable = lp3972_ldo_enable, .disable = lp3972_ldo_disable, @@ -345,17 +318,6 @@ static struct regulator_ops lp3972_ldo_ops = { .set_voltage_sel = lp3972_ldo_set_voltage_sel, }; -static int lp3972_dcdc_list_voltage(struct regulator_dev *dev, unsigned index) -{ - int buck = rdev_get_id(dev) - LP3972_DCDC1; - - if (index < LP3972_BUCK_VOL_MIN_IDX(buck) || - index > LP3972_BUCK_VOL_MAX_IDX(buck)) - return -EINVAL; - - return 1000 * buck_voltage_map[buck][index]; -} - static int lp3972_dcdc_is_enabled(struct regulator_dev *dev) { struct lp3972 *lp3972 = rdev_get_drvdata(dev); @@ -401,7 +363,7 @@ static int lp3972_dcdc_get_voltage(struct regulator_dev *dev) reg = lp3972_reg_read(lp3972, LP3972_BUCK_VOL1_REG(buck)); reg &= LP3972_BUCK_VOL_MASK; if (reg <= LP3972_BUCK_VOL_MAX_IDX(buck)) - val = 1000 * buck_voltage_map[buck][reg]; + val = dev->desc->volt_table[reg]; else { val = 0; dev_warn(&dev->dev, "chip reported incorrect voltage value." @@ -436,7 +398,7 @@ static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev, } static struct regulator_ops lp3972_dcdc_ops = { - .list_voltage = lp3972_dcdc_list_voltage, + .list_voltage = regulator_list_voltage_table, .is_enabled = lp3972_dcdc_is_enabled, .enable = lp3972_dcdc_enable, .disable = lp3972_dcdc_disable, @@ -450,6 +412,7 @@ static const struct regulator_desc regulators[] = { .id = LP3972_LDO1, .ops = &lp3972_ldo_ops, .n_voltages = ARRAY_SIZE(ldo1_voltage_map), + .volt_table = ldo1_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -458,6 +421,7 @@ static const struct regulator_desc regulators[] = { .id = LP3972_LDO2, .ops = &lp3972_ldo_ops, .n_voltages = ARRAY_SIZE(ldo23_voltage_map), + .volt_table = ldo23_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -466,6 +430,7 @@ static const struct regulator_desc regulators[] = { .id = LP3972_LDO3, .ops = &lp3972_ldo_ops, .n_voltages = ARRAY_SIZE(ldo23_voltage_map), + .volt_table = ldo23_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -474,6 +439,7 @@ static const struct regulator_desc regulators[] = { .id = LP3972_LDO4, .ops = &lp3972_ldo_ops, .n_voltages = ARRAY_SIZE(ldo4_voltage_map), + .volt_table = ldo4_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -482,6 +448,7 @@ static const struct regulator_desc regulators[] = { .id = LP3972_LDO5, .ops = &lp3972_ldo_ops, .n_voltages = ARRAY_SIZE(ldo5_voltage_map), + .volt_table = ldo5_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -490,6 +457,7 @@ static const struct regulator_desc regulators[] = { .id = LP3972_DCDC1, .ops = &lp3972_dcdc_ops, .n_voltages = ARRAY_SIZE(buck1_voltage_map), + .volt_table = buck1_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -498,6 +466,7 @@ static const struct regulator_desc regulators[] = { .id = LP3972_DCDC2, .ops = &lp3972_dcdc_ops, .n_voltages = ARRAY_SIZE(buck23_voltage_map), + .volt_table = buck23_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }, @@ -506,6 +475,7 @@ static const struct regulator_desc regulators[] = { .id = LP3972_DCDC3, .ops = &lp3972_dcdc_ops, .n_voltages = ARRAY_SIZE(buck23_voltage_map), + .volt_table = buck23_voltage_map, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, },