From: Ulf Hansson Date: Tue, 13 Dec 2011 15:57:07 +0000 (+0100) Subject: ARM: 7218/1: mmc: mmci: Provide option to configure bus signal direction X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=4d1a3a0dc551cfa7304ca46e014231500f3b81a6;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git ARM: 7218/1: mmc: mmci: Provide option to configure bus signal direction The ST Micro variant supports bus signal direction indication. A new member in the variant struct is added for this. Moreover the actual signal direction configuration is board specific, thus the amba mmci platform data is extended with a new member to be able provide mmci with these specific board configurations. This patch is based upon a patch from Sebastian Rasmussen. Tested-by: Linus Walleij Signed-off-by: Sebastian Rasmussen Signed-off-by: Ulf Hansson Signed-off-by: Russell King --- diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 7cc89beee87f..eb11ce61941d 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -54,6 +54,7 @@ static unsigned int fmax = 515633; * @st_clkdiv: true if using a ST-specific clock divider algorithm * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register * @pwrreg_powerup: power up value for MMCIPOWER register + * @signal_direction: input/out direction of bus signals can be indicated */ struct variant_data { unsigned int clkreg; @@ -65,6 +66,7 @@ struct variant_data { bool st_clkdiv; bool blksz_datactrl16; u32 pwrreg_powerup; + bool signal_direction; }; static struct variant_data variant_arm = { @@ -88,6 +90,7 @@ static struct variant_data variant_u300 = { .datalength_bits = 16, .sdio = true, .pwrreg_powerup = MCI_PWR_ON, + .signal_direction = true, }; static struct variant_data variant_ux500 = { @@ -99,6 +102,7 @@ static struct variant_data variant_ux500 = { .sdio = true, .st_clkdiv = true, .pwrreg_powerup = MCI_PWR_ON, + .signal_direction = true, }; static struct variant_data variant_ux500v2 = { @@ -111,6 +115,7 @@ static struct variant_data variant_ux500v2 = { .st_clkdiv = true, .blksz_datactrl16 = true, .pwrreg_powerup = MCI_PWR_ON, + .signal_direction = true, }; /* @@ -1057,6 +1062,22 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) break; } + if (variant->signal_direction && ios->power_mode != MMC_POWER_OFF) { + /* + * The ST Micro variant has some additional bits + * indicating signal direction for the signals in + * the SD/MMC bus and feedback-clock usage. + */ + pwr |= host->plat->sigdir; + + if (ios->bus_width == MMC_BUS_WIDTH_4) + pwr &= ~MCI_ST_DATA74DIREN; + else if (ios->bus_width == MMC_BUS_WIDTH_1) + pwr &= (~MCI_ST_DATA74DIREN & + ~MCI_ST_DATA31DIREN & + ~MCI_ST_DATA2DIREN); + } + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) { if (host->hw_designer != AMBA_VENDOR_ST) pwr |= MCI_ROD; diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 49f153e6ef7a..89eb2e3556d3 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -13,16 +13,6 @@ #define MCI_PWR_ON 0x03 #define MCI_OD (1 << 6) #define MCI_ROD (1 << 7) -/* - * The ST Micro version does not have ROD and reuse the voltage registers - * for direction settings - */ -#define MCI_ST_DATA2DIREN (1 << 2) -#define MCI_ST_CMDDIREN (1 << 3) -#define MCI_ST_DATA0DIREN (1 << 4) -#define MCI_ST_DATA31DIREN (1 << 5) -#define MCI_ST_FBCLKEN (1 << 7) -#define MCI_ST_DATA74DIREN (1 << 8) #define MMCICLOCK 0x004 #define MCI_CLK_ENABLE (1 << 8) diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index 0101e9c17fa1..b51bf5fa85f8 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -6,6 +6,19 @@ #include + +/* + * These defines is places here due to access is needed from machine + * configuration files. The ST Micro version does not have ROD and + * reuse the voltage registers for direction settings. + */ +#define MCI_ST_DATA2DIREN (1 << 2) +#define MCI_ST_CMDDIREN (1 << 3) +#define MCI_ST_DATA0DIREN (1 << 4) +#define MCI_ST_DATA31DIREN (1 << 5) +#define MCI_ST_FBCLKEN (1 << 7) +#define MCI_ST_DATA74DIREN (1 << 8) + /* Just some dummy forwarding */ struct dma_chan; @@ -31,6 +44,8 @@ struct dma_chan; * @capabilities: the capabilities of the block as implemented in * this platform, signify anything MMC_CAP_* from mmc/host.h * @capabilities2: more capabilities, MMC_CAP2_* from mmc/host.h + * @sigdir: a bit field indicating for what bits in the MMC bus the host + * should enable signal direction indication. * @dma_filter: function used to select an appropriate RX and TX * DMA channel to be used for DMA, if and only if you're deploying the * generic DMA engine @@ -54,6 +69,7 @@ struct mmci_platform_data { bool cd_invert; unsigned long capabilities; unsigned long capabilities2; + u32 sigdir; bool (*dma_filter)(struct dma_chan *chan, void *filter_param); void *dma_rx_param; void *dma_tx_param;