From: Scott Feldman Date: Sun, 10 May 2015 16:48:09 +0000 (-0700) Subject: switchdev: bring documentation up-to-date X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=4ceec22d6d89360ff7ebbf53dd3ab4e29e3d8a09;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git switchdev: bring documentation up-to-date Much need updated of switchdev documentation to cover what's been implmented to-date. There are some XXX comments in the text for unimplemented or broken items. I'd like to keep these in there (poor-man's TODO list) and update the document once each issue is resolved. Signed-off-by: Scott Feldman Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- diff --git a/Documentation/networking/switchdev.txt b/Documentation/networking/switchdev.txt index f981a9295a39..b3e18c8fd040 100644 --- a/Documentation/networking/switchdev.txt +++ b/Documentation/networking/switchdev.txt @@ -1,59 +1,355 @@ -Switch (and switch-ish) device drivers HOWTO -=========================== - -Please note that the word "switch" is here used in very generic meaning. -This include devices supporting L2/L3 but also various flow offloading chips, -including switches embedded into SR-IOV NICs. - -Lets describe a topology a bit. Imagine the following example: - - +----------------------------+ +---------------+ - | SOME switch chip | | CPU | - +----------------------------+ +---------------+ - port1 port2 port3 port4 MNGMNT | PCI-E | - | | | | | +---------------+ - PHY PHY | | | | NIC0 NIC1 - | | | | | | - | | +- PCI-E -+ | | - | +------- MII -------+ | - +------------- MII ------------+ - -In this example, there are two independent lines between the switch silicon -and CPU. NIC0 and NIC1 drivers are not aware of a switch presence. They are -separate from the switch driver. SOME switch chip is by managed by a driver -via PCI-E device MNGMNT. Note that MNGMNT device, NIC0 and NIC1 may be -connected to some other type of bus. - -Now, for the previous example show the representation in kernel: - - +----------------------------+ +---------------+ - | SOME switch chip | | CPU | - +----------------------------+ +---------------+ - sw0p0 sw0p1 sw0p2 sw0p3 MNGMNT | PCI-E | - | | | | | +---------------+ - PHY PHY | | | | eth0 eth1 - | | | | | | - | | +- PCI-E -+ | | - | +------- MII -------+ | - +------------- MII ------------+ - -Lets call the example switch driver for SOME switch chip "SOMEswitch". This -driver takes care of PCI-E device MNGMNT. There is a netdevice instance sw0pX -created for each port of a switch. These netdevices are instances -of "SOMEswitch" driver. sw0pX netdevices serve as a "representation" -of the switch chip. eth0 and eth1 are instances of some other existing driver. - -The only difference of the switch-port netdevice from the ordinary netdevice -is that is implements couple more NDOs: - - ndo_switch_parent_id_get - This returns the same ID for two port netdevices - of the same physical switch chip. This is - mandatory to be implemented by all switch drivers - and serves the caller for recognition of a port - netdevice. - ndo_switch_parent_* - Functions that serve for a manipulation of the switch - chip itself (it can be though of as a "parent" of the - port, therefore the name). They are not port-specific. - Caller might use arbitrary port netdevice of the same - switch and it will make no difference. - ndo_switch_port_* - Functions that serve for a port-specific manipulation. +Ethernet switch device driver model (switchdev) +=============================================== +Copyright (c) 2014 Jiri Pirko +Copyright (c) 2014-2015 Scott Feldman + + +The Ethernet switch device driver model (switchdev) is an in-kernel driver +model for switch devices which offload the forwarding (data) plane from the +kernel. + +Figure 1 is a block diagram showing the components of the switchdev model for +an example setup using a data-center-class switch ASIC chip. Other setups +with SR-IOV or soft switches, such as OVS, are possible. + + +                             User-space tools                                  +                                                                               +       user space                   |                                          +      +-------------------------------------------------------------------+    +       kernel                       | Netlink                                  +                                    |                                          +                     +--------------+-------------------------------+          +                     |         Network stack                        |          +                     |           (Linux)                            |          +                     |                                              |          +                     +----------------------------------------------+          +                                                                               + sw1p2 sw1p4 sw1p6 +                      sw1p1  + sw1p3 +  sw1p5 +         eth1              +                        +    |    +    |    +    |            +                +                        |    |    |    |    |    |            |                +                     +--+----+----+----+-+--+----+---+  +-----+-----+          +                     |         Switch driver         |  |    mgmt   |          +                     |        (this document)        |  |   driver  |          +                     |                               |  |           |          +                     +--------------+----------------+  +-----------+          +                                    |                                          +       kernel                       | HW bus (eg PCI)                          +      +-------------------------------------------------------------------+    +       hardware                     |                                          +                     +--------------+---+------------+                         +                     |         Switch device (sw1)   |                         +                     |  +----+                       +--------+                +                     |  |    v offloaded data path   | mgmt port               +                     |  |    |                       |                         +                     +--|----|----+----+----+----+---+                         +                        |    |    |    |    |    |                             +                        +    +    +    +    +    +                             +                       p1   p2   p3   p4   p5   p6 +                                        +                             front-panel ports                                 +                                                                               + + Fig 1. + + +Include Files +------------- + +#include +#include + + +Configuration +------------- + +Use "depends NET_SWITCHDEV" in driver's Kconfig to ensure switchdev model +support is built for driver. + + +Switch Ports +------------ + +On switchdev driver initialization, the driver will allocate and register a +struct net_device (using register_netdev()) for each enumerated physical switch +port, called the port netdev. A port netdev is the software representation of +the physical port and provides a conduit for control traffic to/from the +controller (the kernel) and the network, as well as an anchor point for higher +level constructs such as bridges, bonds, VLANs, tunnels, and L3 routers. Using +standard netdev tools (iproute2, ethtool, etc), the port netdev can also +provide to the user access to the physical properties of the switch port such +as PHY link state and I/O statistics. + +There is (currently) no higher-level kernel object for the switch beyond the +port netdevs. All of the switchdev driver ops are netdev ops or switchdev ops. + +A switch management port is outside the scope of the switchdev driver model. +Typically, the management port is not participating in offloaded data plane and +is loaded with a different driver, such as a NIC driver, on the management port +device. + +Port Netdev Naming +^^^^^^^^^^^^^^^^^^ + +Udev rules should be used for port netdev naming, using some unique attribute +of the port as a key, for example the port MAC address or the port PHYS name. +Hard-coding of kernel netdev names within the driver is discouraged; let the +kernel pick the default netdev name, and let udev set the final name based on a +port attribute. + +Using port PHYS name (ndo_get_phys_port_name) for the key is particularly +useful for dynically-named ports where the device names it's ports based on +external configuration. For example, if a physical 40G port is split logically +into 4 10G ports, resulting in 4 port netdevs, the device can give a unique +name for each port using port PHYS name. The udev rule would be: + +SUBSYSTEM=="net", ACTION=="add", DRIVER="", ATTR{phys_port_name}!="", \ + NAME="$attr{phys_port_name}" + +Suggested naming convention is "swXpYsZ", where X is the switch name or ID, Y +is the port name or ID, and Z is the sub-port name or ID. For example, sw1p1s0 +would be sub-port 0 on port 1 on switch 1. + +Switch ID +^^^^^^^^^ + +The switchdev driver must implement the switchdev op switchdev_port_attr_get for +SWITCHDEV_ATTR_PORT_PARENT_ID for each port netdev, returning the same physical ID +for each port of a switch. The ID must be unique between switches on the same +system. The ID does not need to be unique between switches on different +systems. + +The switch ID is used to locate ports on a switch and to know if aggregated +ports belong to the same switch. + +Port Features +^^^^^^^^^^^^^ + +NETIF_F_NETNS_LOCAL + +If the switchdev driver (and device) only supports offloading of the default +network namespace (netns), the driver should set this feature flag to prevent +the port netdev from being moved out of the default netns. A netns-aware +driver/device would not set this flag and be resposible for partitioning +hardware to preserve netns containment. This means hardware cannot forward +traffic from a port in one namespace to another port in another namespace. + +Port Topology +^^^^^^^^^^^^^ + +The port netdevs representing the physical switch ports can be organized into +higher-level switching constructs. The default construct is a standalone +router port, used to offload L3 forwarding. Two or more ports can be bonded +together to form a LAG. Two or more ports (or LAGs) can be bridged to bridge +to L2 networks. VLANs can be applied to sub-divide L2 networks. L2-over-L3 +tunnels can be built on ports. These constructs are built using standard Linux +tools such as the bridge driver, the bonding/team drivers, and netlink-based +tools such as iproute2. + +The switchdev driver can know a particular port's position in the topology by +monitoring NETDEV_CHANGEUPPER notifications. For example, a port moved into a +bond will see it's upper master change. If that bond is moved into a bridge, +the bond's upper master will change. And so on. The driver will track such +movements to know what position a port is in in the overall topology by +registering for netdevice events and acting on NETDEV_CHANGEUPPER. + +L2 Forwarding Offload +--------------------- + +The idea is to offload the L2 data forwarding (switching) path from the kernel +to the switchdev device by mirroring bridge FDB entries down to the device. An +FDB entry is the {port, MAC, VLAN} tuple forwarding destination. + +To offloading L2 bridging, the switchdev driver/device should support: + + - Static FDB entries installed on a bridge port + - Notification of learned/forgotten src mac/vlans from device + - STP state changes on the port + - VLAN flooding of multicast/broadcast and unknown unicast packets + +Static FDB Entries +^^^^^^^^^^^^^^^^^^ + +The switchdev driver should implement ndo_fdb_add, ndo_fdb_del and ndo_fdb_dump +to support static FDB entries installed to the device. Static bridge FDB +entries are installed, for example, using iproute2 bridge cmd: + + bridge fdb add ADDR dev DEV [vlan VID] [self] + +Note: by default, the bridge does not filter on VLAN and only bridges untagged +traffic. To enable VLAN support, turn on VLAN filtering: + + echo 1 >/sys/class/net//bridge/vlan_filtering + +Notification of Learned/Forgotten Source MAC/VLANs +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The switch device will learn/forget source MAC address/VLAN on ingress packets +and notify the switch driver of the mac/vlan/port tuples. The switch driver, +in turn, will notify the bridge driver using the switchdev notifier call: + + err = call_switchdev_notifiers(val, dev, info); + +Where val is SWITCHDEV_FDB_ADD when learning and SWITCHDEV_FDB_DEL when forgetting, and +info points to a struct switchdev_notifier_fdb_info. On SWITCHDEV_FDB_ADD, the bridge +driver will install the FDB entry into the bridge's FDB and mark the entry as +NTF_EXT_LEARNED. The iproute2 bridge command will label these entries +"offload": + + $ bridge fdb + 52:54:00:12:35:01 dev sw1p1 master br0 permanent + 00:02:00:00:02:00 dev sw1p1 master br0 offload + 00:02:00:00:02:00 dev sw1p1 self + 52:54:00:12:35:02 dev sw1p2 master br0 permanent + 00:02:00:00:03:00 dev sw1p2 master br0 offload + 00:02:00:00:03:00 dev sw1p2 self + 33:33:00:00:00:01 dev eth0 self permanent + 01:00:5e:00:00:01 dev eth0 self permanent + 33:33:ff:00:00:00 dev eth0 self permanent + 01:80:c2:00:00:0e dev eth0 self permanent + 33:33:00:00:00:01 dev br0 self permanent + 01:00:5e:00:00:01 dev br0 self permanent + 33:33:ff:12:35:01 dev br0 self permanent + +Learning on the port should be disabled on the bridge using the bridge command: + + bridge link set dev DEV learning off + +Learning on the device port should be enabled, as well as learning_sync: + + bridge link set dev DEV learning on self + bridge link set dev DEV learning_sync on self + +Learning_sync attribute enables syncing of the learned/forgotton FDB entry to +the bridge's FDB. It's possible, but not optimal, to enable learning on the +device port and on the bridge port, and disable learning_sync. + +To support learning and learning_sync port attributes, the driver implements +switchdev op switchdev_port_attr_get/set for SWITCHDEV_ATTR_PORT_BRIDGE_FLAGS. The driver +should initialize the attributes to the hardware defaults. + +FDB Ageing +^^^^^^^^^^ + +There are two FDB ageing models supported: 1) ageing by the device, and 2) +ageing by the kernel. Ageing by the device is preferred if many FDB entries +are supported. The driver calls call_switchdev_notifiers(SWITCHDEV_FDB_DEL, ...) to +age out the FDB entry. In this model, ageing by the kernel should be turned +off. XXX: how to turn off ageing in kernel on a per-port basis or otherwise +prevent the kernel from ageing out the FDB entry? + +In the kernel ageing model, the standard bridge ageing mechanism is used to age +out stale FDB entries. To keep an FDB entry "alive", the driver should refresh +the FDB entry by calling call_switchdev_notifiers(SWITCHDEV_FDB_ADD, ...). The +notification will reset the FDB entry's last-used time to now. The driver +should rate limit refresh notifications, for example, no more than once a +second. If the FDB entry expires, ndo_fdb_del is called to remove entry from +the device. XXX: this last part isn't currently correct: ndo_fdb_del isn't +called, so the stale entry remains in device...this need to get fixed. + +FDB Flush +^^^^^^^^^ + +XXX: Unimplemented. Need to support FDB flush by bridge driver for port and +remove both static and learned FDB entries. + +STP State Change on Port +^^^^^^^^^^^^^^^^^^^^^^^^ + +Internally or with a third-party STP protocol implementation (e.g. mstpd), the +bridge driver maintains the STP state for ports, and will notify the switch +driver of STP state change on a port using the switchdev op switchdev_attr_port_set for +SWITCHDEV_ATTR_PORT_STP_UPDATE. + +State is one of BR_STATE_*. The switch driver can use STP state updates to +update ingress packet filter list for the port. For example, if port is +DISABLED, no packets should pass, but if port moves to BLOCKED, then STP BPDUs +and other IEEE 01:80:c2:xx:xx:xx link-local multicast packets can pass. + +Note that STP BDPUs are untagged and STP state applies to all VLANs on the port +so packet filters should be applied consistently across untagged and tagged +VLANs on the port. + +Flooding L2 domain +^^^^^^^^^^^^^^^^^^ + +For a given L2 VLAN domain, the switch device should flood multicast/broadcast +and unknown unicast packets to all ports in domain, if allowed by port's +current STP state. The switch driver, knowing which ports are within which +vlan L2 domain, can program the switch device for flooding. The packet should +also be sent to the port netdev for processing by the bridge driver. The +bridge should not reflood the packet to the same ports the device flooded. +XXX: the mechanism to avoid duplicate flood packets is being discuseed. + +It is possible for the switch device to not handle flooding and push the +packets up to the bridge driver for flooding. This is not ideal as the number +of ports scale in the L2 domain as the device is much more efficient at +flooding packets that software. + +IGMP Snooping +^^^^^^^^^^^^^ + +XXX: complete this section + + +L3 routing +---------- + +Offloading L3 routing requires that device be programmed with FIB entries from +the kernel, with the device doing the FIB lookup and forwarding. The device +does a longest prefix match (LPM) on FIB entries matching route prefix and +forwards the packet to the matching FIB entry's nexthop(s) egress ports. To +program the device, the switchdev driver is called with add/delete ops for IPv4 +and IPv6 FIB entries. For IPv4, the driver implements switchdev ops: + + int (*switchdev_fib_ipv4_add)(struct net_device *dev, + __be32 dst, int dst_len, + struct fib_info *fi, + u8 tos, u8 type, + u32 nlflags, u32 tb_id); + + int (*switchdev_fib_ipv4_del)(struct net_device *dev, + __be32 dst, int dst_len, + struct fib_info *fi, + u8 tos, u8 type, + u32 tb_id); + +to add/delete IPv4 dst/dest_len prefix on table tb_id. The *fi structure holds +details on the route and route's nexthops. *dev is one of the port netdevs +mentioned in the routes next hop list. If the output port netdevs referenced +in the route's nexthop list don't all have the same switch ID, the driver is +not called to add/delete the FIB entry. + +Routes offloaded to the device are labeled with "offload" in the ip route +listing: + + $ ip route show + default via 192.168.0.2 dev eth0 + 11.0.0.0/30 dev sw1p1 proto kernel scope link src 11.0.0.2 offload + 11.0.0.4/30 via 11.0.0.1 dev sw1p1 proto zebra metric 20 offload + 11.0.0.8/30 dev sw1p2 proto kernel scope link src 11.0.0.10 offload + 11.0.0.12/30 via 11.0.0.9 dev sw1p2 proto zebra metric 20 offload + 12.0.0.2 proto zebra metric 30 offload + nexthop via 11.0.0.1 dev sw1p1 weight 1 + nexthop via 11.0.0.9 dev sw1p2 weight 1 + 12.0.0.3 via 11.0.0.1 dev sw1p1 proto zebra metric 20 offload + 12.0.0.4 via 11.0.0.9 dev sw1p2 proto zebra metric 20 offload + 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.15 + +XXX: add/del IPv6 FIB API + +Nexthop Resolution +^^^^^^^^^^^^^^^^^^ + +The FIB entry's nexthop list contains the nexthop tuple (gateway, dev), but for +the switch device to forward the packet with the correct dst mac address, the +nexthop gateways must be resolved to the neighbor's mac address. Neighbor mac +address discovery comes via the ARP (or ND) process and is available via the +arp_tbl neighbor table. To resolve the routes nexthop gateways, the driver +should trigger the kernel's neighbor resolution process. See the rocker +driver's rocker_port_ipv4_resolve() for an example. + +The driver can monitor for updates to arp_tbl using the netevent notifier +NETEVENT_NEIGH_UPDATE. The device can be programmed with resolved nexthops +for the routes as arp_tbl updates.