From: Grant Grundler Date: Tue, 4 Oct 2011 09:55:16 +0000 (+0000) Subject: NET: fix phy init for AX88772 USB ethernet X-Git-Tag: MMI-PSA29.97-13-9~18194^2~161 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=4ad1438f025ed8d1e4e95a796ca7f0ad5a22c378;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git NET: fix phy init for AX88772 USB ethernet Fix phy initialization for AX88772 (USB 2.0 100BT). Failure was occasionally DHCP wouldn't work after reboot or suspend/resume cycle. Remove MONITOR_MODE. In this mode, Received packets are not buffered when the remote wakeup is enabled. Signed-off-by: "Freddy Xin" Signed-off-by: Grant Grundler Acked-by: Olof Johansson Signed-off-by: David S. Miller --- diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index b843eedd409d..9e0b3776b80a 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -36,7 +36,7 @@ #include #include -#define DRIVER_VERSION "14-Jun-2006" +#define DRIVER_VERSION "26-Sep-2011" static const char driver_name [] = "asix"; /* ASIX AX8817X based USB 2.0 Ethernet Devices */ @@ -676,12 +676,6 @@ asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) } wolinfo->supported = WAKE_PHY | WAKE_MAGIC; wolinfo->wolopts = 0; - if (opt & AX_MONITOR_MODE) { - if (opt & AX_MONITOR_LINK) - wolinfo->wolopts |= WAKE_PHY; - if (opt & AX_MONITOR_MAGIC) - wolinfo->wolopts |= WAKE_MAGIC; - } } static int @@ -694,8 +688,6 @@ asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) opt |= AX_MONITOR_LINK; if (wolinfo->wolopts & WAKE_MAGIC) opt |= AX_MONITOR_MAGIC; - if (opt != 0) - opt |= AX_MONITOR_MODE; if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE, opt, 0, 0, NULL) < 0) @@ -966,36 +958,17 @@ static int ax88772_link_reset(struct usbnet *dev) return 0; } -static const struct net_device_ops ax88772_netdev_ops = { - .ndo_open = usbnet_open, - .ndo_stop = usbnet_stop, - .ndo_start_xmit = usbnet_start_xmit, - .ndo_tx_timeout = usbnet_tx_timeout, - .ndo_change_mtu = usbnet_change_mtu, - .ndo_set_mac_address = asix_set_mac_address, - .ndo_validate_addr = eth_validate_addr, - .ndo_do_ioctl = asix_ioctl, - .ndo_set_rx_mode = asix_set_multicast, -}; - -static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) +static int ax88772_reset(struct usbnet *dev) { int ret, embd_phy; u16 rx_ctl; - struct asix_data *data = (struct asix_data *)&dev->data; - u8 buf[ETH_ALEN]; - u32 phyid; - - data->eeprom_len = AX88772_EEPROM_LEN; - - usbnet_get_endpoints(dev,intf); if ((ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5)) < 0) goto out; - /* 0x10 is the phy id of the embedded 10/100 ethernet phy */ embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0); + if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL)) < 0) { dbg("Select PHY #1 failed: %d", ret); @@ -1010,6 +983,7 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) goto out; msleep(150); + if (embd_phy) { if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL)) < 0) goto out; @@ -1028,25 +1002,6 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) rx_ctl = asix_read_rx_ctl(dev); dbg("RX_CTL is 0x%04x setting to 0x0000", rx_ctl); - /* Get the MAC address */ - if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, - 0, 0, ETH_ALEN, buf)) < 0) { - dbg("Failed to read MAC address: %d", ret); - goto out; - } - memcpy(dev->net->dev_addr, buf, ETH_ALEN); - - /* Initialize MII structure */ - dev->mii.dev = dev->net; - dev->mii.mdio_read = asix_mdio_read; - dev->mii.mdio_write = asix_mdio_write; - dev->mii.phy_id_mask = 0x1f; - dev->mii.reg_num_mask = 0x1f; - dev->mii.phy_id = asix_get_phy_addr(dev); - - phyid = asix_get_phyid(dev); - dbg("PHYID=0x%08x", phyid); - if ((ret = asix_sw_reset(dev, AX_SWRESET_PRL)) < 0) goto out; @@ -1057,9 +1012,6 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) msleep(150); - dev->net->netdev_ops = &ax88772_netdev_ops; - dev->net->ethtool_ops = &ax88772_ethtool_ops; - asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_CSMA); @@ -1085,6 +1037,61 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) rx_ctl = asix_read_medium_status(dev); dbg("Medium Status is 0x%04x after all initializations", rx_ctl); + return 0; + +out: + return ret; + +} + +static const struct net_device_ops ax88772_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = usbnet_change_mtu, + .ndo_set_mac_address = asix_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = asix_ioctl, + .ndo_set_rx_mode = asix_set_multicast, +}; + +static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int ret; + struct asix_data *data = (struct asix_data *)&dev->data; + u8 buf[ETH_ALEN]; + u32 phyid; + + data->eeprom_len = AX88772_EEPROM_LEN; + + usbnet_get_endpoints(dev,intf); + + /* Get the MAC address */ + if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, + 0, 0, ETH_ALEN, buf)) < 0) { + dbg("Failed to read MAC address: %d", ret); + goto out; + } + memcpy(dev->net->dev_addr, buf, ETH_ALEN); + + /* Initialize MII structure */ + dev->mii.dev = dev->net; + dev->mii.mdio_read = asix_mdio_read; + dev->mii.mdio_write = asix_mdio_write; + dev->mii.phy_id_mask = 0x1f; + dev->mii.reg_num_mask = 0x1f; + dev->mii.phy_id = asix_get_phy_addr(dev); + + phyid = asix_get_phyid(dev); + dbg("PHYID=0x%08x", phyid); + + dev->net->netdev_ops = &ax88772_netdev_ops; + dev->net->ethtool_ops = &ax88772_ethtool_ops; + + if ((ret = ax88772_reset(dev)) < 0) + goto out; + /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ if (dev->driver_info->flags & FLAG_FRAMING_AX) { /* hard_mtu is still the default - the device does not support @@ -1092,7 +1099,6 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) dev->rx_urb_size = 2048; } return 0; - out: return ret; } @@ -1426,7 +1432,7 @@ static const struct driver_info ax88772_info = { .bind = ax88772_bind, .status = asix_status, .link_reset = ax88772_link_reset, - .reset = ax88772_link_reset, + .reset = ax88772_reset, .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR, .rx_fixup = asix_rx_fixup, .tx_fixup = asix_tx_fixup, @@ -1588,6 +1594,7 @@ static void __exit asix_exit(void) module_exit(asix_exit); MODULE_AUTHOR("David Hollis"); +MODULE_VERSION(DRIVER_VERSION); MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices"); MODULE_LICENSE("GPL");