From: Tyler Baker Date: Tue, 18 Nov 2014 19:10:53 +0000 (-0800) Subject: ARM: multi_v7_defconfig: fix failure setting CPU voltage by enabling dependent I2C... X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=49e41938f8a53d01d1c5d133a038acb9650008f9;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git ARM: multi_v7_defconfig: fix failure setting CPU voltage by enabling dependent I2C controller This patch fixes a long standing issue introduced during the 3.16 merge window. Shortly after the merge, exynos5250-based arndale boards began to produce the following errors: kern.err kernel: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage kern.err kernel: cpufreq: __target_index: Failed to change cpu frequency: -22 Further analysis revealed that the S5M8767 voltage regulator used on the exynos5250-based arndale board utilizes the S3C2410 I2C controller. If the S3C2410 I2C controller driver is not enabled, the S5M8767 voltage regulator fails to probe. Therefore a dependency exists between these two drivers. In the exynos_defconfig both CONFIG_REGULATOR_S5M8767 and CONFIG_I2C_S3C2410 options are enabled, and no errors are produced. However, in the multi_v7_defconfig only the CONFIG_REGULATOR_S5M8767 option is enabled and the errors are present. So let's enable the CONFIG_I2C_S3C2410 option in the multi_v7_defconfig to allow the S5M8767 voltage regulator to probe. Signed-off-by: Tyler Baker Acked-by: Kukjin Kim Signed-off-by: Kevin Hilman --- diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 3487046d8a78..9d7a32f93fcf 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -217,6 +217,7 @@ CONFIG_I2C_CADENCE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_EXYNOS5=y CONFIG_I2C_MV64XXX=y +CONFIG_I2C_S3C2410=y CONFIG_I2C_SIRF=y CONFIG_I2C_TEGRA=y CONFIG_I2C_ST=y