From: Andrei Emeltchenko Date: Tue, 30 Nov 2010 22:11:49 +0000 (-0800) Subject: OMAP: Serial: Define OMAP uart MDR1 reg and remove magic numbers X-Git-Tag: MMI-PSA29.97-13-9~21439^2~61^2~1 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=498cb95175c29ed96bf32f30df2d11ec1c7f3879;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git OMAP: Serial: Define OMAP uart MDR1 reg and remove magic numbers Define MDR1 register serial definitions used in serial and bluetooth drivers. Change magic number to ones defined in serial_reg for omap1/2 serial driver. Remove redefined MDR1 register definitions in omap-serial driver. Signed-off-by: Andrei Emeltchenko Acked-by: G, Manjunath Kondaiah Acked-by: Govindraj.R Acked-by: Greg Kroah-Hartman Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index b78d0749f13d..c73d1b77b364 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -52,9 +52,11 @@ static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset, */ static void __init omap_serial_reset(struct plat_serial8250_port *p) { - omap_serial_outp(p, UART_OMAP_MDR1, 0x07); /* disable UART */ + omap_serial_outp(p, UART_OMAP_MDR1, + UART_OMAP_MDR1_DISABLE); /* disable UART */ omap_serial_outp(p, UART_OMAP_SCR, 0x08); /* TX watermark */ - omap_serial_outp(p, UART_OMAP_MDR1, 0x00); /* enable UART */ + omap_serial_outp(p, UART_OMAP_MDR1, + UART_OMAP_MDR1_16X_MODE); /* enable UART */ if (!cpu_is_omap15xx()) { omap_serial_outp(p, UART_OMAP_SYSC, 0x01); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index d17960a1be25..fa9806250b50 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -169,9 +169,9 @@ static inline void serial_write_reg(struct omap_uart_state *uart, int offset, static inline void __init omap_uart_reset(struct omap_uart_state *uart) { - serial_write_reg(uart, UART_OMAP_MDR1, 0x07); + serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); serial_write_reg(uart, UART_OMAP_SCR, 0x08); - serial_write_reg(uart, UART_OMAP_MDR1, 0x00); + serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); } #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) @@ -247,9 +247,10 @@ static void omap_uart_restore_context(struct omap_uart_state *uart) uart->context_valid = 0; if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) - omap_uart_mdr1_errataset(uart, 0x07, 0xA0); + omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_DISABLE, 0xA0); else - serial_write_reg(uart, UART_OMAP_MDR1, 0x7); + serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); + serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */ efr = serial_read_reg(uart, UART_EFR); serial_write_reg(uart, UART_EFR, UART_EFR_ECB); @@ -268,11 +269,13 @@ static void omap_uart_restore_context(struct omap_uart_state *uart) serial_write_reg(uart, UART_OMAP_SCR, uart->scr); serial_write_reg(uart, UART_OMAP_WER, uart->wer); serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc); + if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) - omap_uart_mdr1_errataset(uart, 0x00, 0xA1); + omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_16X_MODE, 0xA1); else /* UART 16x mode */ - serial_write_reg(uart, UART_OMAP_MDR1, 0x00); + serial_write_reg(uart, UART_OMAP_MDR1, + UART_OMAP_MDR1_16X_MODE); } #else static inline void omap_uart_save_context(struct omap_uart_state *uart) {} diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index c8dae02f0704..6a1788014611 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -31,9 +31,6 @@ */ #define OMAP_SERIAL_NAME "ttyO" -#define OMAP_MDR1_DISABLE 0x07 -#define OMAP_MDR1_MODE13X 0x03 -#define OMAP_MDR1_MODE16X 0x00 #define OMAP_MODE13X_SPEED 230400 /* diff --git a/drivers/serial/omap-serial.c b/drivers/serial/omap-serial.c index 14365f72b664..03a96db67de4 100644 --- a/drivers/serial/omap-serial.c +++ b/drivers/serial/omap-serial.c @@ -753,7 +753,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, /* Protocol, Baud Rate, and Interrupt Settings */ - serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE); + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB); up->efr = serial_in(up, UART_EFR); @@ -774,9 +774,9 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_LCR, cval); if (baud > 230400 && baud != 3000000) - serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE13X); + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE); else - serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE16X); + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); /* Hardware Flow Control Configuration */ diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h index c7a0ce11cd47..6f3823474e6c 100644 --- a/include/linux/serial_reg.h +++ b/include/linux/serial_reg.h @@ -341,5 +341,17 @@ #define UART_OMAP_SYSS 0x16 /* System status register */ #define UART_OMAP_WER 0x17 /* Wake-up enable register */ +/* + * These are the definitions for the MDR1 register + */ +#define UART_OMAP_MDR1_16X_MODE 0x00 /* UART 16x mode */ +#define UART_OMAP_MDR1_SIR_MODE 0x01 /* SIR mode */ +#define UART_OMAP_MDR1_16X_ABAUD_MODE 0x02 /* UART 16x auto-baud */ +#define UART_OMAP_MDR1_13X_MODE 0x03 /* UART 13x mode */ +#define UART_OMAP_MDR1_MIR_MODE 0x04 /* MIR mode */ +#define UART_OMAP_MDR1_FIR_MODE 0x05 /* FIR mode */ +#define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */ +#define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */ + #endif /* _LINUX_SERIAL_REG_H */