From: Jonathan Cameron Date: Fri, 12 Aug 2011 16:47:58 +0000 (+0100) Subject: staging:iio:magnetometer:hmc5843 iio_chan_spec conversion. X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=494c6b150a3170b27b65969de83ec1ab580de701;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git staging:iio:magnetometer:hmc5843 iio_chan_spec conversion. Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c index b44c273a91a8..1bb71864d586 100644 --- a/drivers/staging/iio/magnetometer/hmc5843.c +++ b/drivers/staging/iio/magnetometer/hmc5843.c @@ -24,7 +24,6 @@ #include #include "../iio.h" #include "../sysfs.h" -#include "magnet.h" #define HMC5843_I2C_ADDRESS 0x1E @@ -62,9 +61,9 @@ /* * Device status */ -#define DATA_READY 0x01 -#define DATA_OUTPUT_LOCK 0x02 -#define VOLTAGE_REGULATOR_ENABLED 0x04 +#define DATA_READY 0x01 +#define DATA_OUTPUT_LOCK 0x02 +#define VOLTAGE_REGULATOR_ENABLED 0x04 /* * Mode register configuration @@ -89,22 +88,16 @@ /* * Device Configutration */ -#define CONF_NORMAL 0x00 +#define CONF_NORMAL 0x00 #define CONF_POSITIVE_BIAS 0x01 #define CONF_NEGATIVE_BIAS 0x02 #define CONF_NOT_USED 0x03 #define MEAS_CONF_MASK 0x03 -static const char *regval_to_scale[] = { - "0.0000006173", - "0.0000007692", - "0.0000010309", - "0.0000012821", - "0.0000018868", - "0.0000021739", - "0.0000025641", - "0.0000035714", +static int hmc5843_regval_to_nanoscale[] = { + 6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714 }; + static const int regval_to_input_field_mg[] = { 700, 1000, @@ -115,7 +108,7 @@ static const int regval_to_input_field_mg[] = { 4500, 6500 }; -static const char *regval_to_samp_freq[] = { +static const char * const regval_to_samp_freq[] = { "0.5", "1", "2", @@ -150,37 +143,28 @@ static s32 hmc5843_configure(struct i2c_client *client, } /* Return the measurement value from the specified channel */ -static ssize_t hmc5843_read_measurement(struct device *dev, - struct device_attribute *attr, - char *buf) +static int hmc5843_read_measurement(struct iio_dev *indio_dev, + int address, + int *val) { - struct iio_dev *indio_dev = dev_get_drvdata(dev); struct i2c_client *client = to_i2c_client(indio_dev->dev.parent); - s16 coordinate_val; - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); struct hmc5843_data *data = iio_priv(indio_dev); s32 result; mutex_lock(&data->lock); - result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG); while (!(result & DATA_READY)) result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG); - result = i2c_smbus_read_word_data(client, this_attr->address); + result = i2c_smbus_read_word_data(client, address); mutex_unlock(&data->lock); if (result < 0) return -EINVAL; - coordinate_val = (s16)swab16((u16)result); - return sprintf(buf, "%d\n", coordinate_val); + *val = (s16)swab16((u16)result); + return IIO_VAL_INT; } -static IIO_DEV_ATTR_MAGN_X(hmc5843_read_measurement, - HMC5843_DATA_OUT_X_MSB_REG); -static IIO_DEV_ATTR_MAGN_Y(hmc5843_read_measurement, - HMC5843_DATA_OUT_Y_MSB_REG); -static IIO_DEV_ATTR_MAGN_Z(hmc5843_read_measurement, - HMC5843_DATA_OUT_Z_MSB_REG); + /* * From the datasheet @@ -336,7 +320,7 @@ static s32 hmc5843_set_rate(struct i2c_client *client, reg_val = (data->meas_conf) | (rate << RATE_OFFSET); if (rate >= RATE_NOT_USED) { dev_err(&client->dev, - "This data output rate is not supported \n"); + "This data output rate is not supported\n"); return -EINVAL; } return i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_A, reg_val); @@ -467,28 +451,46 @@ static IIO_DEVICE_ATTR(magn_range, set_range, HMC5843_CONFIG_REG_B); -static ssize_t show_scale(struct device *dev, - struct device_attribute *attr, - char *buf) +static int hmc5843_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) { - struct iio_dev *indio_dev = dev_get_drvdata(dev); struct hmc5843_data *data = iio_priv(indio_dev); - return strlen(strcpy(buf, regval_to_scale[data->range])); + + switch (mask) { + case 0: + return hmc5843_read_measurement(indio_dev, + chan->address, + val); + case (1 << IIO_CHAN_INFO_SCALE_SHARED): + *val = 0; + *val2 = hmc5843_regval_to_nanoscale[data->range]; + return IIO_VAL_INT_PLUS_NANO; + }; + return -EINVAL; } -static IIO_DEVICE_ATTR(magn_scale, - S_IRUGO, - show_scale, - NULL , 0); + +#define HMC5843_CHANNEL(axis, add) \ + { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask = (1 << IIO_CHAN_INFO_SCALE_SHARED), \ + .address = add \ + } + +static const struct iio_chan_spec hmc5843_channels[] = { + HMC5843_CHANNEL(X, HMC5843_DATA_OUT_X_MSB_REG), + HMC5843_CHANNEL(Y, HMC5843_DATA_OUT_Y_MSB_REG), + HMC5843_CHANNEL(Z, HMC5843_DATA_OUT_Z_MSB_REG), +}; static struct attribute *hmc5843_attributes[] = { &iio_dev_attr_meas_conf.dev_attr.attr, &iio_dev_attr_operating_mode.dev_attr.attr, &iio_dev_attr_sampling_frequency.dev_attr.attr, &iio_dev_attr_magn_range.dev_attr.attr, - &iio_dev_attr_magn_scale.dev_attr.attr, - &iio_dev_attr_magn_x_raw.dev_attr.attr, - &iio_dev_attr_magn_y_raw.dev_attr.attr, - &iio_dev_attr_magn_z_raw.dev_attr.attr, &iio_const_attr_sampling_frequency_available.dev_attr.attr, NULL }; @@ -530,6 +532,7 @@ static void hmc5843_init_client(struct i2c_client *client) static const struct iio_info hmc5843_info = { .attrs = &hmc5843_group, + .read_raw = &hmc5843_read_raw, .driver_module = THIS_MODULE, }; @@ -558,6 +561,9 @@ static int hmc5843_probe(struct i2c_client *client, hmc5843_init_client(client); indio_dev->info = &hmc5843_info; + indio_dev->name = id->name; + indio_dev->channels = hmc5843_channels; + indio_dev->num_channels = ARRAY_SIZE(hmc5843_channels); indio_dev->dev.parent = &client->dev; indio_dev->modes = INDIO_DIRECT_MODE; err = iio_device_register(indio_dev);