From: Chanwoo Choi Date: Tue, 10 Mar 2015 02:23:44 +0000 (+0900) Subject: thermal: exynos: Add the support for Exynos5433 TMU X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=488c7455d74c;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git thermal: exynos: Add the support for Exynos5433 TMU This patch adds the support for Exynos5433's TMU (Thermal Management Unit). Exynos5433 has a little different register bit fields as following description: - Support the eight trip points for rising/falling interrupt by using two registers - Read the calibration type (1-point or 2-point) and sensor id from TRIMINFO register - Use a little different register address Cc: Zhang Rui Cc: Eduardo Valentin Cc: Lukasz Majewski Signed-off-by: Chanwoo Choi Signed-off-by: Eduardo Valentin --- diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 1d30b0975651..531f4b179871 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -97,6 +97,32 @@ #define EXYNOS4412_MUX_ADDR_VALUE 6 #define EXYNOS4412_MUX_ADDR_SHIFT 20 +/* Exynos5433 specific registers */ +#define EXYNOS5433_TMU_REG_CONTROL1 0x024 +#define EXYNOS5433_TMU_SAMPLING_INTERVAL 0x02c +#define EXYNOS5433_TMU_COUNTER_VALUE0 0x030 +#define EXYNOS5433_TMU_COUNTER_VALUE1 0x034 +#define EXYNOS5433_TMU_REG_CURRENT_TEMP1 0x044 +#define EXYNOS5433_THD_TEMP_RISE3_0 0x050 +#define EXYNOS5433_THD_TEMP_RISE7_4 0x054 +#define EXYNOS5433_THD_TEMP_FALL3_0 0x060 +#define EXYNOS5433_THD_TEMP_FALL7_4 0x064 +#define EXYNOS5433_TMU_REG_INTEN 0x0c0 +#define EXYNOS5433_TMU_REG_INTPEND 0x0c8 +#define EXYNOS5433_TMU_EMUL_CON 0x110 +#define EXYNOS5433_TMU_PD_DET_EN 0x130 + +#define EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT 16 +#define EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT 23 +#define EXYNOS5433_TRIMINFO_SENSOR_ID_MASK \ + (0xf << EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT) +#define EXYNOS5433_TRIMINFO_CALIB_SEL_MASK BIT(23) + +#define EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING 0 +#define EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING 1 + +#define EXYNOS5433_PD_DET_EN 1 + /*exynos5440 specific registers*/ #define EXYNOS5440_TMU_S0_7_TRIM 0x000 #define EXYNOS5440_TMU_S0_7_CTRL 0x020 @@ -484,6 +510,101 @@ out: return ret; } +static int exynos5433_tmu_initialize(struct platform_device *pdev) +{ + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + struct exynos_tmu_platform_data *pdata = data->pdata; + struct thermal_zone_device *tz = data->tzd; + unsigned int status, trim_info; + unsigned int rising_threshold = 0, falling_threshold = 0; + unsigned long temp, temp_hist; + int ret = 0, threshold_code, i, sensor_id, cal_type; + + status = readb(data->base + EXYNOS_TMU_REG_STATUS); + if (!status) { + ret = -EBUSY; + goto out; + } + + trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); + sanitize_temp_error(data, trim_info); + + /* Read the temperature sensor id */ + sensor_id = (trim_info & EXYNOS5433_TRIMINFO_SENSOR_ID_MASK) + >> EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT; + dev_info(&pdev->dev, "Temperature sensor ID: 0x%x\n", sensor_id); + + /* Read the calibration mode */ + writel(trim_info, data->base + EXYNOS_TMU_REG_TRIMINFO); + cal_type = (trim_info & EXYNOS5433_TRIMINFO_CALIB_SEL_MASK) + >> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT; + + switch (cal_type) { + case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING: + pdata->cal_type = TYPE_ONE_POINT_TRIMMING; + break; + case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING: + pdata->cal_type = TYPE_TWO_POINT_TRIMMING; + break; + default: + pdata->cal_type = TYPE_ONE_POINT_TRIMMING; + break; + }; + + dev_info(&pdev->dev, "Calibration type is %d-point calibration\n", + cal_type ? 2 : 1); + + /* Write temperature code for rising and falling threshold */ + for (i = 0; i < of_thermal_get_ntrips(tz); i++) { + int rising_reg_offset, falling_reg_offset; + int j = 0; + + switch (i) { + case 0: + case 1: + case 2: + case 3: + rising_reg_offset = EXYNOS5433_THD_TEMP_RISE3_0; + falling_reg_offset = EXYNOS5433_THD_TEMP_FALL3_0; + j = i; + break; + case 4: + case 5: + case 6: + case 7: + rising_reg_offset = EXYNOS5433_THD_TEMP_RISE7_4; + falling_reg_offset = EXYNOS5433_THD_TEMP_FALL7_4; + j = i - 4; + break; + default: + continue; + } + + /* Write temperature code for rising threshold */ + tz->ops->get_trip_temp(tz, i, &temp); + temp /= MCELSIUS; + threshold_code = temp_to_code(data, temp); + + rising_threshold = readl(data->base + rising_reg_offset); + rising_threshold |= (threshold_code << j * 8); + writel(rising_threshold, data->base + rising_reg_offset); + + /* Write temperature code for falling threshold */ + tz->ops->get_trip_hyst(tz, i, &temp_hist); + temp_hist = temp - (temp_hist / MCELSIUS); + threshold_code = temp_to_code(data, temp_hist); + + falling_threshold = readl(data->base + falling_reg_offset); + falling_threshold &= ~(0xff << j * 8); + falling_threshold |= (threshold_code << j * 8); + writel(falling_threshold, data->base + falling_reg_offset); + } + + data->tmu_clear_irqs(data); +out: + return ret; +} + static int exynos5440_tmu_initialize(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); @@ -643,6 +764,48 @@ static void exynos4210_tmu_control(struct platform_device *pdev, bool on) writel(con, data->base + EXYNOS_TMU_REG_CONTROL); } +static void exynos5433_tmu_control(struct platform_device *pdev, bool on) +{ + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + struct thermal_zone_device *tz = data->tzd; + unsigned int con, interrupt_en, pd_det_en; + + con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); + + if (on) { + con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); + interrupt_en = + (of_thermal_is_trip_valid(tz, 7) + << EXYNOS7_TMU_INTEN_RISE7_SHIFT) | + (of_thermal_is_trip_valid(tz, 6) + << EXYNOS7_TMU_INTEN_RISE6_SHIFT) | + (of_thermal_is_trip_valid(tz, 5) + << EXYNOS7_TMU_INTEN_RISE5_SHIFT) | + (of_thermal_is_trip_valid(tz, 4) + << EXYNOS7_TMU_INTEN_RISE4_SHIFT) | + (of_thermal_is_trip_valid(tz, 3) + << EXYNOS7_TMU_INTEN_RISE3_SHIFT) | + (of_thermal_is_trip_valid(tz, 2) + << EXYNOS7_TMU_INTEN_RISE2_SHIFT) | + (of_thermal_is_trip_valid(tz, 1) + << EXYNOS7_TMU_INTEN_RISE1_SHIFT) | + (of_thermal_is_trip_valid(tz, 0) + << EXYNOS7_TMU_INTEN_RISE0_SHIFT); + + interrupt_en |= + interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; + } else { + con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); + interrupt_en = 0; /* Disable all interrupts */ + } + + pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0; + + writel(pd_det_en, data->base + EXYNOS5433_TMU_PD_DET_EN); + writel(interrupt_en, data->base + EXYNOS5433_TMU_REG_INTEN); + writel(con, data->base + EXYNOS_TMU_REG_CONTROL); +} + static void exynos5440_tmu_control(struct platform_device *pdev, bool on) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); @@ -770,6 +933,8 @@ static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data, if (data->soc == SOC_ARCH_EXYNOS5260) emul_con = EXYNOS5260_EMUL_CON; + if (data->soc == SOC_ARCH_EXYNOS5433) + emul_con = EXYNOS5433_TMU_EMUL_CON; else if (data->soc == SOC_ARCH_EXYNOS7) emul_con = EXYNOS7_TMU_REG_EMUL_CON; else @@ -882,6 +1047,9 @@ static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data) } else if (data->soc == SOC_ARCH_EXYNOS7) { tmu_intstat = EXYNOS7_TMU_REG_INTPEND; tmu_intclear = EXYNOS7_TMU_REG_INTPEND; + } else if (data->soc == SOC_ARCH_EXYNOS5433) { + tmu_intstat = EXYNOS5433_TMU_REG_INTPEND; + tmu_intclear = EXYNOS5433_TMU_REG_INTPEND; } else { tmu_intstat = EXYNOS_TMU_REG_INTSTAT; tmu_intclear = EXYNOS_TMU_REG_INTCLEAR; @@ -926,6 +1094,7 @@ static const struct of_device_id exynos_tmu_match[] = { { .compatible = "samsung,exynos5260-tmu", }, { .compatible = "samsung,exynos5420-tmu", }, { .compatible = "samsung,exynos5420-tmu-ext-triminfo", }, + { .compatible = "samsung,exynos5433-tmu", }, { .compatible = "samsung,exynos5440-tmu", }, { .compatible = "samsung,exynos7-tmu", }, { /* sentinel */ }, @@ -949,6 +1118,8 @@ static int exynos_of_get_soc_type(struct device_node *np) else if (of_device_is_compatible(np, "samsung,exynos5420-tmu-ext-triminfo")) return SOC_ARCH_EXYNOS5420_TRIMINFO; + else if (of_device_is_compatible(np, "samsung,exynos5433-tmu")) + return SOC_ARCH_EXYNOS5433; else if (of_device_is_compatible(np, "samsung,exynos5440-tmu")) return SOC_ARCH_EXYNOS5440; else if (of_device_is_compatible(np, "samsung,exynos7-tmu")) @@ -1069,6 +1240,13 @@ static int exynos_map_dt_data(struct platform_device *pdev) data->tmu_set_emulation = exynos4412_tmu_set_emulation; data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; break; + case SOC_ARCH_EXYNOS5433: + data->tmu_initialize = exynos5433_tmu_initialize; + data->tmu_control = exynos5433_tmu_control; + data->tmu_read = exynos4412_tmu_read; + data->tmu_set_emulation = exynos4412_tmu_set_emulation; + data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; + break; case SOC_ARCH_EXYNOS5440: data->tmu_initialize = exynos5440_tmu_initialize; data->tmu_control = exynos5440_tmu_control; @@ -1172,7 +1350,9 @@ static int exynos_tmu_probe(struct platform_device *pdev) goto err_clk_sec; } - if (data->soc == SOC_ARCH_EXYNOS7) { + switch (data->soc) { + case SOC_ARCH_EXYNOS5433: + case SOC_ARCH_EXYNOS7: data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk"); if (IS_ERR(data->sclk)) { dev_err(&pdev->dev, "Failed to get sclk\n"); @@ -1184,7 +1364,10 @@ static int exynos_tmu_probe(struct platform_device *pdev) goto err_clk; } } - } + break; + default: + break; + }; ret = exynos_tmu_initialize(pdev); if (ret) { diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index 4d71ec6c9aa0..440c7140b660 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -33,6 +33,7 @@ enum soc_type { SOC_ARCH_EXYNOS5260, SOC_ARCH_EXYNOS5420, SOC_ARCH_EXYNOS5420_TRIMINFO, + SOC_ARCH_EXYNOS5433, SOC_ARCH_EXYNOS5440, SOC_ARCH_EXYNOS7, };