From: Ville Syrjälä Date: Tue, 12 Apr 2016 19:14:35 +0000 (+0300) Subject: drm/i915: Compute DSI PLL parameters during .compute_config() X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=47eacbabcbbe34d12efebae4820ac1613a28bcb7;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git drm/i915: Compute DSI PLL parameters during .compute_config() Compute the DSI PLL parameters during .compute_config() rather than .pre_pll_enable() so that we can fail gracefully if we can't find suitable parameters. In order to do that we need to store the DSI PLL parameters in pipe_config. v2: Handle BXT too Signed-off-by: Ville Syrjälä Reviewed-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1460488478-18311-3-git-send-email-ville.syrjala@linux.intel.com Tested-by: Jani Nikula --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d9266f9a185e..4cca155376be 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -12763,6 +12763,9 @@ intel_pipe_config_compare(struct drm_device *dev, PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr1); PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr2); + PIPE_CONF_CHECK_X(dsi_pll.ctrl); + PIPE_CONF_CHECK_X(dsi_pll.div); + if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) PIPE_CONF_CHECK_I(pipe_bpp); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 72153359cbb3..e13ce2290de7 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -497,6 +497,11 @@ struct intel_crtc_state { /* Actual register state of the dpll, for shared dpll cross-checking. */ struct intel_dpll_hw_state dpll_hw_state; + /* DSI PLL registers */ + struct { + u32 ctrl, div; + } dsi_pll; + int pipe_bpp; struct intel_link_m_n dp_m_n; diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 22bd42a8aab0..c43c8caf8c95 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -292,6 +292,7 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder, struct intel_connector *intel_connector = intel_dsi->attached_connector; struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode; struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; + int ret; DRM_DEBUG_KMS("\n"); @@ -311,10 +312,10 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder, pipe_config->cpu_transcoder = TRANSCODER_DSI_A; } - /* - * FIXME move the DSI PLL calc from vlv_enable_dsi_pll() - * to .compute_config(). - */ + ret = intel_compute_dsi_pll(encoder, pipe_config); + if (ret) + return false; + pipe_config->clock_set = true; return true; @@ -504,6 +505,7 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder) struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); enum port port; u32 tmp; @@ -514,7 +516,7 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder) * lock. It needs to be fully powered down to fix it. */ intel_disable_dsi_pll(encoder); - intel_enable_dsi_pll(encoder); + intel_enable_dsi_pll(encoder, crtc->config); intel_dsi_prepare(encoder); @@ -824,7 +826,8 @@ static void intel_dsi_get_config(struct intel_encoder *encoder, if (IS_BROXTON(dev)) bxt_dsi_get_pipe_config(encoder, pipe_config); - pclk = intel_dsi_get_pclk(encoder, pipe_config->pipe_bpp); + pclk = intel_dsi_get_pclk(encoder, pipe_config->pipe_bpp, + pipe_config); if (!pclk) return; diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h index dabde19ee8aa..61a6957fc6c2 100644 --- a/drivers/gpu/drm/i915/intel_dsi.h +++ b/drivers/gpu/drm/i915/intel_dsi.h @@ -127,11 +127,15 @@ static inline struct intel_dsi *enc_to_intel_dsi(struct drm_encoder *encoder) } bool intel_dsi_pll_is_enabled(struct drm_i915_private *dev_priv); -extern void intel_enable_dsi_pll(struct intel_encoder *encoder); -extern void intel_disable_dsi_pll(struct intel_encoder *encoder); -extern u32 intel_dsi_get_pclk(struct intel_encoder *encoder, int pipe_bpp); -extern void intel_dsi_reset_clocks(struct intel_encoder *encoder, - enum port port); +int intel_compute_dsi_pll(struct intel_encoder *encoder, + struct intel_crtc_state *config); +void intel_enable_dsi_pll(struct intel_encoder *encoder, + const struct intel_crtc_state *config); +void intel_disable_dsi_pll(struct intel_encoder *encoder); +u32 intel_dsi_get_pclk(struct intel_encoder *encoder, int pipe_bpp, + struct intel_crtc_state *config); +void intel_dsi_reset_clocks(struct intel_encoder *encoder, + enum port port); struct drm_panel *vbt_panel_init(struct intel_dsi *intel_dsi, u16 panel_id); enum mipi_dsi_pixel_format pixel_format_from_register_bits(u32 fmt); diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c b/drivers/gpu/drm/i915/intel_dsi_pll.c index 7ad59d13dd4c..115f59646514 100644 --- a/drivers/gpu/drm/i915/intel_dsi_pll.c +++ b/drivers/gpu/drm/i915/intel_dsi_pll.c @@ -30,11 +30,6 @@ #include "i915_drv.h" #include "intel_dsi.h" -struct dsi_mnp { - u32 dsi_pll_ctrl; - u32 dsi_pll_div; -}; - static const u16 lfsr_converts[] = { 426, 469, 234, 373, 442, 221, 110, 311, 411, /* 62 - 70 */ 461, 486, 243, 377, 188, 350, 175, 343, 427, 213, /* 71 - 80 */ @@ -57,7 +52,8 @@ static u32 dsi_clk_from_pclk(u32 pclk, enum mipi_dsi_pixel_format fmt, } static int dsi_calc_mnp(struct drm_i915_private *dev_priv, - struct dsi_mnp *dsi_mnp, int target_dsi_clk) + struct intel_crtc_state *config, + int target_dsi_clk) { unsigned int calc_m = 0, calc_p = 0; unsigned int m_min, m_max, p_min = 2, p_max = 6; @@ -103,8 +99,8 @@ static int dsi_calc_mnp(struct drm_i915_private *dev_priv, /* register has log2(N1), this works fine for powers of two */ n = ffs(n) - 1; m_seed = lfsr_converts[calc_m - 62]; - dsi_mnp->dsi_pll_ctrl = 1 << (DSI_PLL_P1_POST_DIV_SHIFT + calc_p - 2); - dsi_mnp->dsi_pll_div = n << DSI_PLL_N1_DIV_SHIFT | + config->dsi_pll.ctrl = 1 << (DSI_PLL_P1_POST_DIV_SHIFT + calc_p - 2); + config->dsi_pll.div = n << DSI_PLL_N1_DIV_SHIFT | m_seed << DSI_PLL_M1_DIV_SHIFT; return 0; @@ -114,54 +110,63 @@ static int dsi_calc_mnp(struct drm_i915_private *dev_priv, * XXX: The muxing and gating is hard coded for now. Need to add support for * sharing PLLs with two DSI outputs. */ -static void vlv_configure_dsi_pll(struct intel_encoder *encoder) +static int vlv_compute_dsi_pll(struct intel_encoder *encoder, + struct intel_crtc_state *config) { struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); int ret; - struct dsi_mnp dsi_mnp; u32 dsi_clk; dsi_clk = dsi_clk_from_pclk(intel_dsi->pclk, intel_dsi->pixel_format, intel_dsi->lane_count); - ret = dsi_calc_mnp(dev_priv, &dsi_mnp, dsi_clk); + ret = dsi_calc_mnp(dev_priv, config, dsi_clk); if (ret) { DRM_DEBUG_KMS("dsi_calc_mnp failed\n"); - return; + return ret; } if (intel_dsi->ports & (1 << PORT_A)) - dsi_mnp.dsi_pll_ctrl |= DSI_PLL_CLK_GATE_DSI0_DSIPLL; + config->dsi_pll.ctrl |= DSI_PLL_CLK_GATE_DSI0_DSIPLL; if (intel_dsi->ports & (1 << PORT_C)) - dsi_mnp.dsi_pll_ctrl |= DSI_PLL_CLK_GATE_DSI1_DSIPLL; + config->dsi_pll.ctrl |= DSI_PLL_CLK_GATE_DSI1_DSIPLL; + + config->dsi_pll.ctrl |= DSI_PLL_VCO_EN; DRM_DEBUG_KMS("dsi pll div %08x, ctrl %08x\n", - dsi_mnp.dsi_pll_div, dsi_mnp.dsi_pll_ctrl); + config->dsi_pll.div, config->dsi_pll.ctrl); + + return 0; +} + +static void vlv_configure_dsi_pll(struct intel_encoder *encoder, + const struct intel_crtc_state *config) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, 0); - vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_DIVIDER, dsi_mnp.dsi_pll_div); - vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, dsi_mnp.dsi_pll_ctrl); + vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_DIVIDER, config->dsi_pll.div); + vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, + config->dsi_pll.ctrl & ~DSI_PLL_VCO_EN); } -static void vlv_enable_dsi_pll(struct intel_encoder *encoder) +static void vlv_enable_dsi_pll(struct intel_encoder *encoder, + const struct intel_crtc_state *config) { - struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; - u32 tmp; + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); DRM_DEBUG_KMS("\n"); mutex_lock(&dev_priv->sb_lock); - vlv_configure_dsi_pll(encoder); + vlv_configure_dsi_pll(encoder, config); /* wait at least 0.5 us after ungating before enabling VCO */ usleep_range(1, 10); - tmp = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL); - tmp |= DSI_PLL_VCO_EN; - vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, tmp); + vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, config->dsi_pll.ctrl); if (wait_for(vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL) & DSI_PLL_LOCK, 20)) { @@ -177,7 +182,7 @@ static void vlv_enable_dsi_pll(struct intel_encoder *encoder) static void vlv_disable_dsi_pll(struct intel_encoder *encoder) { - struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); u32 tmp; DRM_DEBUG_KMS("\n"); @@ -224,7 +229,7 @@ static bool bxt_dsi_pll_is_enabled(struct drm_i915_private *dev_priv) static void bxt_disable_dsi_pll(struct intel_encoder *encoder) { - struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); u32 val; DRM_DEBUG_KMS("\n"); @@ -251,9 +256,10 @@ static void assert_bpp_mismatch(enum mipi_dsi_pixel_format fmt, int pipe_bpp) bpp, pipe_bpp); } -static u32 vlv_dsi_get_pclk(struct intel_encoder *encoder, int pipe_bpp) +static u32 vlv_dsi_get_pclk(struct intel_encoder *encoder, int pipe_bpp, + struct intel_crtc_state *config) { - struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); u32 dsi_clock, pclk; u32 pll_ctl, pll_div; @@ -268,6 +274,9 @@ static u32 vlv_dsi_get_pclk(struct intel_encoder *encoder, int pipe_bpp) pll_div = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_DIVIDER); mutex_unlock(&dev_priv->sb_lock); + config->dsi_pll.ctrl = pll_ctl & ~DSI_PLL_LOCK; + config->dsi_pll.div = pll_div; + /* mask out other bits and extract the P1 divisor */ pll_ctl &= DSI_PLL_P1_POST_DIV_MASK; pll_ctl = pll_ctl >> (DSI_PLL_P1_POST_DIV_SHIFT - 2); @@ -313,7 +322,8 @@ static u32 vlv_dsi_get_pclk(struct intel_encoder *encoder, int pipe_bpp) return pclk; } -static u32 bxt_dsi_get_pclk(struct intel_encoder *encoder, int pipe_bpp) +static u32 bxt_dsi_get_pclk(struct intel_encoder *encoder, int pipe_bpp, + struct intel_crtc_state *config) { u32 pclk; u32 dsi_clk; @@ -327,15 +337,9 @@ static u32 bxt_dsi_get_pclk(struct intel_encoder *encoder, int pipe_bpp) return 0; } - dsi_ratio = I915_READ(BXT_DSI_PLL_CTL) & - BXT_DSI_PLL_RATIO_MASK; + config->dsi_pll.ctrl = I915_READ(BXT_DSI_PLL_CTL); - /* Invalid DSI ratio ? */ - if (dsi_ratio < BXT_DSI_PLL_RATIO_MIN || - dsi_ratio > BXT_DSI_PLL_RATIO_MAX) { - DRM_ERROR("Invalid DSI pll ratio(%u) programmed\n", dsi_ratio); - return 0; - } + dsi_ratio = config->dsi_pll.ctrl & BXT_DSI_PLL_RATIO_MASK; dsi_clk = (dsi_ratio * BXT_REF_CLOCK_KHZ) / 2; @@ -348,12 +352,13 @@ static u32 bxt_dsi_get_pclk(struct intel_encoder *encoder, int pipe_bpp) return pclk; } -u32 intel_dsi_get_pclk(struct intel_encoder *encoder, int pipe_bpp) +u32 intel_dsi_get_pclk(struct intel_encoder *encoder, int pipe_bpp, + struct intel_crtc_state *config) { if (IS_BROXTON(encoder->base.dev)) - return bxt_dsi_get_pclk(encoder, pipe_bpp); + return bxt_dsi_get_pclk(encoder, pipe_bpp, config); else - return vlv_dsi_get_pclk(encoder, pipe_bpp); + return vlv_dsi_get_pclk(encoder, pipe_bpp, config); } static void vlv_dsi_reset_clocks(struct intel_encoder *encoder, enum port port) @@ -370,7 +375,8 @@ static void vlv_dsi_reset_clocks(struct intel_encoder *encoder, enum port port) } /* Program BXT Mipi clocks and dividers */ -static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port) +static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port, + const struct intel_crtc_state *config) { struct drm_i915_private *dev_priv = dev->dev_private; u32 tmp; @@ -390,8 +396,7 @@ static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port) tmp &= ~(BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port)); /* Get the current DSI rate(actual) */ - pll_ratio = I915_READ(BXT_DSI_PLL_CTL) & - BXT_DSI_PLL_RATIO_MASK; + pll_ratio = config->dsi_pll.ctrl & BXT_DSI_PLL_RATIO_MASK; dsi_rate = (BXT_REF_CLOCK_KHZ * pll_ratio) / 2; /* @@ -427,16 +432,15 @@ static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port) I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp); } -static bool bxt_configure_dsi_pll(struct intel_encoder *encoder) +static int bxt_compute_dsi_pll(struct intel_encoder *encoder, + struct intel_crtc_state *config) { - struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); u8 dsi_ratio; u32 dsi_clk; - u32 val; dsi_clk = dsi_clk_from_pclk(intel_dsi->pclk, intel_dsi->pixel_format, - intel_dsi->lane_count); + intel_dsi->lane_count); /* * From clock diagram, to get PLL ratio divider, divide double of DSI @@ -445,9 +449,9 @@ static bool bxt_configure_dsi_pll(struct intel_encoder *encoder) */ dsi_ratio = DIV_ROUND_UP(dsi_clk * 2, BXT_REF_CLOCK_KHZ); if (dsi_ratio < BXT_DSI_PLL_RATIO_MIN || - dsi_ratio > BXT_DSI_PLL_RATIO_MAX) { + dsi_ratio > BXT_DSI_PLL_RATIO_MAX) { DRM_ERROR("Cant get a suitable ratio from DSI PLL ratios\n"); - return false; + return -ECHRNG; } /* @@ -455,27 +459,28 @@ static bool bxt_configure_dsi_pll(struct intel_encoder *encoder) * Spec says both have to be programmed, even if one is not getting * used. Configure MIPI_CLOCK_CTL dividers in modeset */ - val = I915_READ(BXT_DSI_PLL_CTL); - val &= ~BXT_DSI_PLL_PVD_RATIO_MASK; - val &= ~BXT_DSI_FREQ_SEL_MASK; - val &= ~BXT_DSI_PLL_RATIO_MASK; - val |= (dsi_ratio | BXT_DSIA_16X_BY2 | BXT_DSIC_16X_BY2); + config->dsi_pll.ctrl = dsi_ratio | BXT_DSIA_16X_BY2 | BXT_DSIC_16X_BY2; /* As per recommendation from hardware team, * Prog PVD ratio =1 if dsi ratio <= 50 */ - if (dsi_ratio <= 50) { - val &= ~BXT_DSI_PLL_PVD_RATIO_MASK; - val |= BXT_DSI_PLL_PVD_RATIO_1; - } + if (dsi_ratio <= 50) + config->dsi_pll.ctrl |= BXT_DSI_PLL_PVD_RATIO_1; - I915_WRITE(BXT_DSI_PLL_CTL, val); - POSTING_READ(BXT_DSI_PLL_CTL); + return 0; +} - return true; +static void bxt_configure_dsi_pll(struct intel_encoder *encoder, + const struct intel_crtc_state *config) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + + I915_WRITE(BXT_DSI_PLL_CTL, config->dsi_pll.ctrl); + POSTING_READ(BXT_DSI_PLL_CTL); } -static void bxt_enable_dsi_pll(struct intel_encoder *encoder) +static void bxt_enable_dsi_pll(struct intel_encoder *encoder, + const struct intel_crtc_state *config) { struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); @@ -485,14 +490,11 @@ static void bxt_enable_dsi_pll(struct intel_encoder *encoder) DRM_DEBUG_KMS("\n"); /* Configure PLL vales */ - if (!bxt_configure_dsi_pll(encoder)) { - DRM_ERROR("Configure DSI PLL failed, abort PLL enable\n"); - return; - } + bxt_configure_dsi_pll(encoder, config); /* Program TX, RX, Dphy clocks */ for_each_dsi_port(port, intel_dsi->ports) - bxt_dsi_program_clocks(encoder->base.dev, port); + bxt_dsi_program_clocks(encoder->base.dev, port, config); /* Enable DSI PLL */ val = I915_READ(BXT_DSI_PLL_ENABLE); @@ -518,14 +520,28 @@ bool intel_dsi_pll_is_enabled(struct drm_i915_private *dev_priv) return false; } -void intel_enable_dsi_pll(struct intel_encoder *encoder) +int intel_compute_dsi_pll(struct intel_encoder *encoder, + struct intel_crtc_state *config) +{ + struct drm_device *dev = encoder->base.dev; + + if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) + return vlv_compute_dsi_pll(encoder, config); + else if (IS_BROXTON(dev)) + return bxt_compute_dsi_pll(encoder, config); + + return -ENODEV; +} + +void intel_enable_dsi_pll(struct intel_encoder *encoder, + const struct intel_crtc_state *config) { struct drm_device *dev = encoder->base.dev; if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) - vlv_enable_dsi_pll(encoder); + vlv_enable_dsi_pll(encoder, config); else if (IS_BROXTON(dev)) - bxt_enable_dsi_pll(encoder); + bxt_enable_dsi_pll(encoder, config); } void intel_disable_dsi_pll(struct intel_encoder *encoder)