From: Jesse Barnes Date: Thu, 11 Feb 2010 20:41:05 +0000 (-0800) Subject: drm/i915: enable/disable LVDS port at DPMS time X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=469d129664c5b83f37ca74913700d416d584833b;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git drm/i915: enable/disable LVDS port at DPMS time It would be good to disable the LVDS port when we shut down the panel to save power. We haven't done so until now because we had trouble getting the right LVDS parameters from the BIOS. I think we're past that now, so enabling and disabling the port should be safe, though it would probably be made cleaner with some additional changes to the display code, where we also bang on the LVDS reg to set the pairing correctly etc. Seems to save a bit of power (up to 300mW in my basic wattsup meter testing). Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 222459ad178d..14e516fdc2dd 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -89,17 +89,22 @@ static u32 intel_lvds_get_max_backlight(struct drm_device *dev) static void intel_lvds_set_power(struct drm_device *dev, bool on) { struct drm_i915_private *dev_priv = dev->dev_private; - u32 pp_status, ctl_reg, status_reg; + u32 pp_status, ctl_reg, status_reg, lvds_reg; if (HAS_PCH_SPLIT(dev)) { ctl_reg = PCH_PP_CONTROL; status_reg = PCH_PP_STATUS; + lvds_reg = PCH_LVDS; } else { ctl_reg = PP_CONTROL; status_reg = PP_STATUS; + lvds_reg = LVDS; } if (on) { + I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN); + POSTING_READ(lvds_reg); + I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON); do { @@ -115,6 +120,9 @@ static void intel_lvds_set_power(struct drm_device *dev, bool on) do { pp_status = I915_READ(status_reg); } while (pp_status & PP_ON); + + I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN); + POSTING_READ(lvds_reg); } }