From: Dmitry Torokhov Date: Thu, 1 Dec 2011 07:44:30 +0000 (-0800) Subject: Input: migor-ts - convert to a threaded IRQ X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=468792eb1e9fb2de855a1978c1228c55d9ed2753;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git Input: migor-ts - convert to a threaded IRQ Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c index 5803bd0c1cca..af746b793378 100644 --- a/drivers/input/touchscreen/migor_ts.c +++ b/drivers/input/touchscreen/migor_ts.c @@ -36,7 +36,6 @@ struct migor_ts_priv { struct i2c_client *client; struct input_dev *input; - struct delayed_work work; int irq; }; @@ -44,15 +43,24 @@ static const u_int8_t migor_ts_ena_seq[17] = { 0x33, 0x22, 0x11, 0x01, 0x06, 0x07, }; static const u_int8_t migor_ts_dis_seq[17] = { }; -static void migor_ts_poscheck(struct work_struct *work) +static irqreturn_t migor_ts_isr(int irq, void *dev_id) { - struct migor_ts_priv *priv = container_of(work, - struct migor_ts_priv, - work.work); + struct migor_ts_priv *priv = dev_id; unsigned short xpos, ypos; unsigned char event; u_int8_t buf[16]; + /* + * The touch screen controller chip is hooked up to the CPU + * using I2C and a single interrupt line. The interrupt line + * is pulled low whenever someone taps the screen. To deassert + * the interrupt line we need to acknowledge the interrupt by + * communicating with the controller over the slow i2c bus. + * + * Since I2C bus controller may sleep we are using threaded + * IRQ here. + */ + memset(buf, 0, sizeof(buf)); /* Set Index 0 */ @@ -72,41 +80,25 @@ static void migor_ts_poscheck(struct work_struct *work) xpos = ((buf[11] & 0x03) << 8 | buf[10]); event = buf[12]; - if (event == EVENT_PENDOWN || event == EVENT_REPEAT) { + switch (event) { + case EVENT_PENDOWN: + case EVENT_REPEAT: input_report_key(priv->input, BTN_TOUCH, 1); input_report_abs(priv->input, ABS_X, ypos); /*X-Y swap*/ input_report_abs(priv->input, ABS_Y, xpos); input_sync(priv->input); - } else if (event == EVENT_PENUP) { + break; + + case EVENT_PENUP: input_report_key(priv->input, BTN_TOUCH, 0); input_sync(priv->input); + break; } - out: - enable_irq(priv->irq); -} - -static irqreturn_t migor_ts_isr(int irq, void *dev_id) -{ - struct migor_ts_priv *priv = dev_id; - - /* the touch screen controller chip is hooked up to the cpu - * using i2c and a single interrupt line. the interrupt line - * is pulled low whenever someone taps the screen. to deassert - * the interrupt line we need to acknowledge the interrupt by - * communicating with the controller over the slow i2c bus. - * - * we can't acknowledge from interrupt context since the i2c - * bus controller may sleep, so we just disable the interrupt - * here and handle the acknowledge using delayed work. - */ - - disable_irq_nosync(irq); - schedule_delayed_work(&priv->work, HZ / 20); + out: return IRQ_HANDLED; } - static int migor_ts_open(struct input_dev *dev) { struct migor_ts_priv *priv = input_get_drvdata(dev); @@ -131,15 +123,6 @@ static void migor_ts_close(struct input_dev *dev) disable_irq(priv->irq); - /* cancel pending work and wait for migor_ts_poscheck() to finish */ - if (cancel_delayed_work_sync(&priv->work)) { - /* - * if migor_ts_poscheck was canceled we need to enable IRQ - * here to balance disable done in migor_ts_isr. - */ - enable_irq(priv->irq); - } - /* disable controller */ i2c_master_send(client, migor_ts_dis_seq, sizeof(migor_ts_dis_seq)); @@ -186,15 +169,15 @@ static int migor_ts_probe(struct i2c_client *client, priv->client = client; priv->input = input; - INIT_DELAYED_WORK(&priv->work, migor_ts_poscheck); priv->irq = client->irq; error = input_register_device(input); if (error) goto err1; - error = request_irq(priv->irq, migor_ts_isr, IRQF_TRIGGER_LOW, - client->name, priv); + error = request_threaded_irq(priv->irq, NULL, migor_ts_isr, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + client->name, priv); if (error) { dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); goto err2;