From: Jitendra Bhivare Date: Wed, 20 Jan 2016 08:40:54 +0000 (+0530) Subject: be2iscsi: Add FW config validation X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=4570f1618ec045ade994237d3f4f5644181845cc;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git be2iscsi: Add FW config validation System crash in I+T card personality. Fix to add validation for ULP in initiator mode, physical port number, and supported queue, icd, cid counts. Signed-off-by: Jitendra Bhivare Reviewed-by: Hannes Reinicke Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c index e86eca98a525..bdedcbb16730 100644 --- a/drivers/scsi/be2iscsi/be_main.c +++ b/drivers/scsi/be2iscsi/be_main.c @@ -5667,6 +5667,7 @@ static int beiscsi_dev_probe(struct pci_dev *pcidev, goto free_port; } mgmt_get_port_name(&phba->ctrl, phba); + beiscsi_get_params(phba); if (enable_msix) find_num_cpus(phba); @@ -5684,7 +5685,6 @@ static int beiscsi_dev_probe(struct pci_dev *pcidev, } phba->shost->max_id = phba->params.cxns_per_ctrl; - beiscsi_get_params(phba); phba->shost->can_queue = phba->params.ios_per_ctrl; ret = beiscsi_init_port(phba); if (ret < 0) { diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h index c09082aef7ae..f89861be2e39 100644 --- a/drivers/scsi/be2iscsi/be_main.h +++ b/drivers/scsi/be2iscsi/be_main.h @@ -397,7 +397,9 @@ struct beiscsi_hba { * group together since they are used most frequently * for cid to cri conversion */ +#define BEISCSI_PHYS_PORT_MAX 4 unsigned int phys_port; + /* valid values of phys_port id are 0, 1, 2, 3 */ unsigned int eqid_count; unsigned int cqid_count; unsigned int iscsi_cid_start[BEISCSI_ULP_COUNT]; diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c index 5aae153d3a6c..3eea8b884310 100644 --- a/drivers/scsi/be2iscsi/be_mgmt.c +++ b/drivers/scsi/be2iscsi/be_mgmt.c @@ -373,90 +373,146 @@ int mgmt_get_fw_config(struct be_ctrl_info *ctrl, struct beiscsi_hba *phba) { struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); - struct be_fw_cfg *req = embedded_payload(wrb); - int status = 0; + struct be_fw_cfg *pfw_cfg = embedded_payload(wrb); + uint32_t cid_count, icd_count; + int status = -EINVAL; + uint8_t ulp_num = 0; mutex_lock(&ctrl->mbox_lock); memset(wrb, 0, sizeof(*wrb)); + be_wrb_hdr_prepare(wrb, sizeof(*pfw_cfg), true, 0); - be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); - - be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, + be_cmd_hdr_prepare(&pfw_cfg->hdr, CMD_SUBSYSTEM_COMMON, OPCODE_COMMON_QUERY_FIRMWARE_CONFIG, EMBED_MBX_MAX_PAYLOAD_SIZE); - status = be_mbox_notify(ctrl); - if (!status) { - uint8_t ulp_num = 0; - struct be_fw_cfg *pfw_cfg; - pfw_cfg = req; - if (!is_chip_be2_be3r(phba)) { - phba->fw_config.eqid_count = pfw_cfg->eqid_count; - phba->fw_config.cqid_count = pfw_cfg->cqid_count; + if (be_mbox_notify(ctrl)) { + beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, + "BG_%d : Failed in mgmt_get_fw_config\n"); + goto fail_init; + } - beiscsi_log(phba, KERN_INFO, - BEISCSI_LOG_INIT, - "BG_%d : EQ_Count : %d CQ_Count : %d\n", - phba->fw_config.eqid_count, + /* FW response formats depend on port id */ + phba->fw_config.phys_port = pfw_cfg->phys_port; + if (phba->fw_config.phys_port >= BEISCSI_PHYS_PORT_MAX) { + beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, + "BG_%d : invalid physical port id %d\n", + phba->fw_config.phys_port); + goto fail_init; + } + + /* populate and check FW config against min and max values */ + if (!is_chip_be2_be3r(phba)) { + phba->fw_config.eqid_count = pfw_cfg->eqid_count; + phba->fw_config.cqid_count = pfw_cfg->cqid_count; + if (phba->fw_config.eqid_count == 0 || + phba->fw_config.eqid_count > 2048) { + beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, + "BG_%d : invalid EQ count %d\n", + phba->fw_config.eqid_count); + goto fail_init; + } + if (phba->fw_config.cqid_count == 0 || + phba->fw_config.cqid_count > 4096) { + beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, + "BG_%d : invalid CQ count %d\n", phba->fw_config.cqid_count); + goto fail_init; } + beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, + "BG_%d : EQ_Count : %d CQ_Count : %d\n", + phba->fw_config.eqid_count, + phba->fw_config.cqid_count); + } - for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++) - if (pfw_cfg->ulp[ulp_num].ulp_mode & - BEISCSI_ULP_ISCSI_INI_MODE) - set_bit(ulp_num, - &phba->fw_config.ulp_supported); - - phba->fw_config.phys_port = pfw_cfg->phys_port; - for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++) { - if (test_bit(ulp_num, &phba->fw_config.ulp_supported)) { - - phba->fw_config.iscsi_cid_start[ulp_num] = - pfw_cfg->ulp[ulp_num].sq_base; - phba->fw_config.iscsi_cid_count[ulp_num] = - pfw_cfg->ulp[ulp_num].sq_count; - - phba->fw_config.iscsi_icd_start[ulp_num] = - pfw_cfg->ulp[ulp_num].icd_base; - phba->fw_config.iscsi_icd_count[ulp_num] = - pfw_cfg->ulp[ulp_num].icd_count; - - phba->fw_config.iscsi_chain_start[ulp_num] = - pfw_cfg->chain_icd[ulp_num].chain_base; - phba->fw_config.iscsi_chain_count[ulp_num] = - pfw_cfg->chain_icd[ulp_num].chain_count; - - beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, - "BG_%d : Function loaded on ULP : %d\n" - "\tiscsi_cid_count : %d\n" - "\tiscsi_cid_start : %d\n" - "\t iscsi_icd_count : %d\n" - "\t iscsi_icd_start : %d\n", - ulp_num, - phba->fw_config. - iscsi_cid_count[ulp_num], - phba->fw_config. - iscsi_cid_start[ulp_num], - phba->fw_config. - iscsi_icd_count[ulp_num], - phba->fw_config. - iscsi_icd_start[ulp_num]); - } + /** + * Check on which all ULP iSCSI Protocol is loaded. + * Set the Bit for those ULP. This set flag is used + * at all places in the code to check on which ULP + * iSCSi Protocol is loaded + **/ + for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++) { + if (pfw_cfg->ulp[ulp_num].ulp_mode & + BEISCSI_ULP_ISCSI_INI_MODE) { + set_bit(ulp_num, &phba->fw_config.ulp_supported); + + /* Get the CID, ICD and Chain count for each ULP */ + phba->fw_config.iscsi_cid_start[ulp_num] = + pfw_cfg->ulp[ulp_num].sq_base; + phba->fw_config.iscsi_cid_count[ulp_num] = + pfw_cfg->ulp[ulp_num].sq_count; + + phba->fw_config.iscsi_icd_start[ulp_num] = + pfw_cfg->ulp[ulp_num].icd_base; + phba->fw_config.iscsi_icd_count[ulp_num] = + pfw_cfg->ulp[ulp_num].icd_count; + + phba->fw_config.iscsi_chain_start[ulp_num] = + pfw_cfg->chain_icd[ulp_num].chain_base; + phba->fw_config.iscsi_chain_count[ulp_num] = + pfw_cfg->chain_icd[ulp_num].chain_count; + + beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, + "BG_%d : Function loaded on ULP : %d\n" + "\tiscsi_cid_count : %d\n" + "\tiscsi_cid_start : %d\n" + "\t iscsi_icd_count : %d\n" + "\t iscsi_icd_start : %d\n", + ulp_num, + phba->fw_config. + iscsi_cid_count[ulp_num], + phba->fw_config. + iscsi_cid_start[ulp_num], + phba->fw_config. + iscsi_icd_count[ulp_num], + phba->fw_config. + iscsi_icd_start[ulp_num]); } + } - phba->fw_config.dual_ulp_aware = (pfw_cfg->function_mode & - BEISCSI_FUNC_DUA_MODE); + if (phba->fw_config.ulp_supported == 0) { + beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, + "BG_%d : iSCSI initiator mode not set: ULP0 %x ULP1 %x\n", + pfw_cfg->ulp[BEISCSI_ULP0].ulp_mode, + pfw_cfg->ulp[BEISCSI_ULP1].ulp_mode); + goto fail_init; + } - beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, - "BG_%d : DUA Mode : 0x%x\n", - phba->fw_config.dual_ulp_aware); + /** + * ICD is shared among ULPs. Use icd_count of any one loaded ULP + **/ + for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++) + if (test_bit(ulp_num, &phba->fw_config.ulp_supported)) + break; + icd_count = phba->fw_config.iscsi_icd_count[ulp_num]; + if (icd_count == 0 || icd_count > 65536) { + beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, + "BG_%d: invalid ICD count %d\n", icd_count); + goto fail_init; + } - } else { + cid_count = BEISCSI_GET_CID_COUNT(phba, BEISCSI_ULP0) + + BEISCSI_GET_CID_COUNT(phba, BEISCSI_ULP1); + if (cid_count == 0 || cid_count > 4096) { beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, - "BG_%d : Failed in mgmt_get_fw_config\n"); - status = -EINVAL; + "BG_%d: invalid CID count %d\n", cid_count); + goto fail_init; } + /** + * Check FW is dual ULP aware i.e. can handle either + * of the protocols. + */ + phba->fw_config.dual_ulp_aware = (pfw_cfg->function_mode & + BEISCSI_FUNC_DUA_MODE); + + beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, + "BG_%d : DUA Mode : 0x%x\n", + phba->fw_config.dual_ulp_aware); + + /* all set, continue using this FW config */ + status = 0; +fail_init: mutex_unlock(&ctrl->mbox_lock); return status; }