From: Rafał Miłecki Date: Thu, 8 Jun 2017 20:04:26 +0000 (+0200) Subject: phy: bcm-ns-usb3: enable MDIO in the platform specific code X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=4536adee0a96864a1ff000025c4c9a6299541f83;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git phy: bcm-ns-usb3: enable MDIO in the platform specific code When we finally start using MDIO layer then bus initialization will be handled in a separated driver. It means our code handling this has to be used for the platform driver only. Signed-off-by: Rafał Miłecki Signed-off-by: Kishon Vijay Abraham I --- diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb3.c b/drivers/phy/broadcom/phy-bcm-ns-usb3.c index 3d0fe5728029..2c9a0d5f43d8 100644 --- a/drivers/phy/broadcom/phy-bcm-ns-usb3.c +++ b/drivers/phy/broadcom/phy-bcm-ns-usb3.c @@ -80,12 +80,6 @@ static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3) { int err; - /* Enable MDIO. Setting MDCDIV as 26 */ - writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL); - - /* Wait for MDIO? */ - udelay(2); - /* USB3 PLL Block */ err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, BCM_NS_USB3_PHY_PLL30_BLOCK); @@ -134,12 +128,6 @@ static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3) { int err; - /* Enable MDIO. Setting MDCDIV as 26 */ - writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL); - - /* Wait for MDIO? */ - udelay(2); - /* PLL30 block */ err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, BCM_NS_USB3_PHY_PLL30_BLOCK); @@ -278,6 +266,12 @@ static int bcm_ns_usb3_probe(struct platform_device *pdev) return PTR_ERR(usb3->ccb_mii); } + /* Enable MDIO. Setting MDCDIV as 26 */ + writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL); + + /* Wait for MDIO? */ + udelay(2); + usb3->phy_write = bcm_ns_usb3_platform_phy_write; usb3->phy = devm_phy_create(dev, NULL, &ops);