From: Jean Pihet Date: Wed, 17 Nov 2010 17:52:11 +0000 (+0000) Subject: OMAP3: add comments for erratas i540 and i478 workarounds X-Git-Tag: MMI-PSA29.97-13-9~21439^2~43 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=447b8da5d78ac8f2815a7824c0eb4ad66ba3e11e;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git OMAP3: add comments for erratas i540 and i478 workarounds Add comments and IDs for the following erratas: - i540: MPU cannot exit from Standby, - i478: Unexpected Cold-Reset is generated when device is coming back from OFF mode Signed-off-by: Jean Pihet Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 32eeabe9d2ab..85bf8ca95fd3 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -284,7 +284,10 @@ void omap3_intc_suspend(void) void omap3_intc_prepare_idle(void) { - /* Disable autoidle as it can stall interrupt controller */ + /* + * Disable autoidle as it can stall interrupt controller, + * cf. errata ID i540 for 3430 (all revisions up to 3.1.x) + */ intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG); } diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h index fa904861668b..ce5c15bc41b8 100644 --- a/arch/arm/mach-omap2/powerdomains34xx.h +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -80,6 +80,10 @@ static struct powerdomain mpu_3xxx_pwrdm = { * 3430s upto ES3.0 and 3630ES1.0. Hence this feature * needs to be disabled on these chips. * Refer: 3430 errata ID i459 and 3630 errata ID i579 + * + * Note: setting the SAR flag could help for errata ID i478 + * which applies to 3430 <= ES3.1, but since the SAR feature + * is broken, do not use it. */ static struct powerdomain core_3xxx_pre_es3_1_pwrdm = { .name = "core_pwrdm", @@ -108,6 +112,10 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = { CHIP_GE_OMAP3630ES1_1), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, + /* + * Setting the SAR flag for errata ID i478 which applies + * to 3430 <= ES3.1 + */ .flags = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */ .banks = 2, .pwrsts_mem_ret = {