From: Adrian Hunter Date: Wed, 20 Apr 2016 06:24:03 +0000 (+0300) Subject: mmc: sdhci: Remove SDHCI_SDR104_NEEDS_TUNING X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=4228b21390f55616e50d2cfa3a374489b930a130;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git mmc: sdhci: Remove SDHCI_SDR104_NEEDS_TUNING SDHCI_SDR104_NEEDS_TUNING was originally named SDHCI_HS200_NEEDS_TUNING and was added in commit 069c9f142822 ("mmc: host: Adds support for eMMC 4.5 HS200 mode"). That commit conflated SDHCI_SDR50_NEEDS_TUNING and SDHCI_HS200_NEEDS_TUNING due to what appears to be misplaced parentheses. Commit 156e14b126ff ("mmc: sdhci: fix caps2 for HS200") made HS200 configuration equivalent to SDR104 configuration, renaming SDHCI_HS200_NEEDS_TUNING to SDHCI_SDR104_NEEDS_TUNING despite tuning for HS200 now being non-optional. The mix-up with SDHCI_SDR50_NEEDS_TUNING remained and became more obvious after commit 4b6f37d3a379 ("mmc: sdhci: clean up sdhci_execute_tuning() decision") where the author noted the patch was "reflecting what the original code was doing, it shows that it may not be what the author actually intended." The way the code is currently written, SDHCI_SDR104_NEEDS_TUNING causes tuning to be done always for SDR50 mode if SDR104 mode is also supported by the host controller. That makes no sense because we already have capabilities bit SDHCI_USE_SDR50_TUNING and corresponding flag SDHCI_SDR50_NEEDS_TUNING for that purpose. Given the dubious origins of SDHCI_SDR104_NEEDS_TUNING, it seems reasonable to remove it. The benefit being SDR50 mode will now not un-nessessarily do tuning. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index b284924aed13..a26c3996d78d 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1906,8 +1906,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) break; case MMC_TIMING_UHS_SDR50: - if (host->flags & SDHCI_SDR50_NEEDS_TUNING || - host->flags & SDHCI_SDR104_NEEDS_TUNING) + if (host->flags & SDHCI_SDR50_NEEDS_TUNING) break; /* FALLTHROUGH */ @@ -3171,10 +3170,6 @@ int sdhci_add_host(struct sdhci_host *host) if (caps[1] & SDHCI_USE_SDR50_TUNING) host->flags |= SDHCI_SDR50_NEEDS_TUNING; - /* Does the host need tuning for SDR104 / HS200? */ - if (mmc->caps2 & MMC_CAP2_HS200) - host->flags |= SDHCI_SDR104_NEEDS_TUNING; - /* Driver Type(s) (A, C, D) supported by the host */ if (caps[1] & SDHCI_DRIVER_TYPE_A) mmc->caps |= MMC_CAP_DRIVER_TYPE_A; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 0decc859523d..502627d71deb 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -445,7 +445,6 @@ struct sdhci_host { #define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ #define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ -#define SDHCI_SDR104_NEEDS_TUNING (1<<10) /* SDR104/HS200 needs tuning */ #define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */ #define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */