From: Daniel J Blueman Date: Tue, 15 Dec 2009 02:01:37 +0000 (-0800) Subject: hwmon: w83627ehf updates X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=41e9a062361de204d3710038925ae7f356ebb40d;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git hwmon: w83627ehf updates Add control of fan minimum turn-on output levels, decoupling it from the fan turn-off output level. Add control of rate of change of fan output level. These in turn allow lower turn-off rotor speed and smoother transitions for better thermal and acoustic control authority. Add support for constant fan speed and proportional-response operations modes. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Daniel J Blueman Cc: Jean Delvare Cc: David Hubbard Cc: Hans de Goede Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf index 02b74899edaf..b7e42ec4b26b 100644 --- a/Documentation/hwmon/w83627ehf +++ b/Documentation/hwmon/w83627ehf @@ -81,8 +81,14 @@ pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range: 0 (stop) to 255 (full) pwm[1-4]_enable - this file controls mode of fan/temperature control: - * 1 Manual Mode, write to pwm file any value 0-255 (full speed) - * 2 Thermal Cruise + * 1 Manual mode, write to pwm file any value 0-255 (full speed) + * 2 "Thermal Cruise" mode + * 3 "Fan Speed Cruise" mode + * 4 "Smart Fan III" mode + +pwm[1-4]_mode - controls if output is PWM or DC level + * 0 DC output (0 - 12v) + * 1 PWM output Thermal Cruise mode ------------------- diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index bb5e78748783..0dcaba9b7189 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -5,6 +5,7 @@ Copyright (C) 2006 Yuan Mu (Winbond), Rudolf Marek David Hubbard + Daniel J Blueman Shamelessly ripped from the w83627hf driver Copyright (C) 2003 Mark Studebaker @@ -177,12 +178,15 @@ static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0x152, 0x252 }; #define W83627EHF_REG_ALARM3 0x45B /* SmartFan registers */ +#define W83627EHF_REG_FAN_STEPUP_TIME 0x0f +#define W83627EHF_REG_FAN_STEPDOWN_TIME 0x0e + /* DC or PWM output fan configuration */ static const u8 W83627EHF_REG_PWM_ENABLE[] = { 0x04, /* SYS FAN0 output mode and PWM mode */ 0x04, /* CPU FAN0 output mode and PWM mode */ 0x12, /* AUX FAN mode */ - 0x62, /* CPU fan1 mode */ + 0x62, /* CPU FAN1 mode */ }; static const u8 W83627EHF_PWM_MODE_SHIFT[] = { 0, 1, 0, 6 }; @@ -193,10 +197,12 @@ static const u8 W83627EHF_REG_PWM[] = { 0x01, 0x03, 0x11, 0x61 }; static const u8 W83627EHF_REG_TARGET[] = { 0x05, 0x06, 0x13, 0x63 }; static const u8 W83627EHF_REG_TOLERANCE[] = { 0x07, 0x07, 0x14, 0x62 }; - /* Advanced Fan control, some values are common for all fans */ -static const u8 W83627EHF_REG_FAN_MIN_OUTPUT[] = { 0x08, 0x09, 0x15, 0x64 }; -static const u8 W83627EHF_REG_FAN_STOP_TIME[] = { 0x0C, 0x0D, 0x17, 0x66 }; +static const u8 W83627EHF_REG_FAN_START_OUTPUT[] = { 0x0a, 0x0b, 0x16, 0x65 }; +static const u8 W83627EHF_REG_FAN_STOP_OUTPUT[] = { 0x08, 0x09, 0x15, 0x64 }; +static const u8 W83627EHF_REG_FAN_STOP_TIME[] = { 0x0c, 0x0d, 0x17, 0x66 }; +static const u8 W83627EHF_REG_FAN_MAX_OUTPUT[] = { 0xff, 0x67, 0xff, 0x69 }; +static const u8 W83627EHF_REG_FAN_STEP_OUTPUT[] = { 0xff, 0x68, 0xff, 0x6a }; /* * Conversions @@ -295,14 +301,19 @@ struct w83627ehf_data { u8 pwm_mode[4]; /* 0->DC variable voltage, 1->PWM variable duty cycle */ u8 pwm_enable[4]; /* 1->manual - 2->thermal cruise (also called SmartFan I) */ + 2->thermal cruise mode (also called SmartFan I) + 3->fan speed cruise mode + 4->variable thermal cruise (also called SmartFan III) */ u8 pwm_num; /* number of pwm */ u8 pwm[4]; u8 target_temp[4]; u8 tolerance[4]; - u8 fan_min_output[4]; /* minimum fan speed */ - u8 fan_stop_time[4]; + u8 fan_start_output[4]; /* minimum fan speed when spinning up */ + u8 fan_stop_output[4]; /* minimum fan speed when spinning down */ + u8 fan_stop_time[4]; /* time at minimum before disabling fan */ + u8 fan_max_output[4]; /* maximum fan speed */ + u8 fan_step_output[4]; /* rate of change output value */ u8 vid; u8 vrm; @@ -529,8 +540,10 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) & 3) + 1; data->pwm[i] = w83627ehf_read_value(data, W83627EHF_REG_PWM[i]); - data->fan_min_output[i] = w83627ehf_read_value(data, - W83627EHF_REG_FAN_MIN_OUTPUT[i]); + data->fan_start_output[i] = w83627ehf_read_value(data, + W83627EHF_REG_FAN_START_OUTPUT[i]); + data->fan_stop_output[i] = w83627ehf_read_value(data, + W83627EHF_REG_FAN_STOP_OUTPUT[i]); data->fan_stop_time[i] = w83627ehf_read_value(data, W83627EHF_REG_FAN_STOP_TIME[i]); data->target_temp[i] = @@ -976,7 +989,7 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr, u32 val = simple_strtoul(buf, NULL, 10); u16 reg; - if (!val || (val > 2)) /* only modes 1 and 2 are supported */ + if (!val || (val > 4)) return -EINVAL; mutex_lock(&data->update_lock); reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]); @@ -1118,7 +1131,10 @@ store_##reg(struct device *dev, struct device_attribute *attr, \ return count; \ } -fan_functions(fan_min_output, FAN_MIN_OUTPUT) +fan_functions(fan_start_output, FAN_START_OUTPUT) +fan_functions(fan_stop_output, FAN_STOP_OUTPUT) +fan_functions(fan_max_output, FAN_MAX_OUTPUT) +fan_functions(fan_step_output, FAN_STEP_OUTPUT) #define fan_time_functions(reg, REG) \ static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ @@ -1161,8 +1177,14 @@ static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); static struct sensor_device_attribute sda_sf3_arrays_fan4[] = { SENSOR_ATTR(pwm4_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time, store_fan_stop_time, 3), - SENSOR_ATTR(pwm4_min_output, S_IWUSR | S_IRUGO, show_fan_min_output, - store_fan_min_output, 3), + SENSOR_ATTR(pwm4_start_output, S_IWUSR | S_IRUGO, show_fan_start_output, + store_fan_start_output, 3), + SENSOR_ATTR(pwm4_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output, + store_fan_stop_output, 3), + SENSOR_ATTR(pwm4_max_output, S_IWUSR | S_IRUGO, show_fan_max_output, + store_fan_max_output, 3), + SENSOR_ATTR(pwm4_step_output, S_IWUSR | S_IRUGO, show_fan_step_output, + store_fan_step_output, 3), }; static struct sensor_device_attribute sda_sf3_arrays[] = { @@ -1172,12 +1194,24 @@ static struct sensor_device_attribute sda_sf3_arrays[] = { store_fan_stop_time, 1), SENSOR_ATTR(pwm3_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time, store_fan_stop_time, 2), - SENSOR_ATTR(pwm1_min_output, S_IWUSR | S_IRUGO, show_fan_min_output, - store_fan_min_output, 0), - SENSOR_ATTR(pwm2_min_output, S_IWUSR | S_IRUGO, show_fan_min_output, - store_fan_min_output, 1), - SENSOR_ATTR(pwm3_min_output, S_IWUSR | S_IRUGO, show_fan_min_output, - store_fan_min_output, 2), + SENSOR_ATTR(pwm1_start_output, S_IWUSR | S_IRUGO, show_fan_start_output, + store_fan_start_output, 0), + SENSOR_ATTR(pwm2_start_output, S_IWUSR | S_IRUGO, show_fan_start_output, + store_fan_start_output, 1), + SENSOR_ATTR(pwm3_start_output, S_IWUSR | S_IRUGO, show_fan_start_output, + store_fan_start_output, 2), + SENSOR_ATTR(pwm1_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output, + store_fan_stop_output, 0), + SENSOR_ATTR(pwm2_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output, + store_fan_stop_output, 1), + SENSOR_ATTR(pwm3_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output, + store_fan_stop_output, 2), + + /* pwm1 and pwm3 don't support max and step settings */ + SENSOR_ATTR(pwm2_max_output, S_IWUSR | S_IRUGO, show_fan_max_output, + store_fan_max_output, 1), + SENSOR_ATTR(pwm2_step_output, S_IWUSR | S_IRUGO, show_fan_step_output, + store_fan_step_output, 1), }; static ssize_t