From: Ian Abbott Date: Wed, 24 Oct 2012 15:47:45 +0000 (+0100) Subject: staging: comedi: amplc_dio200: reformat driver comment X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=41b25f871405a4abd6055ca47d3f3056c75200e7;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git staging: comedi: amplc_dio200: reformat driver comment Reformat the driver description comment to use the preferred block comment style so that future changes are acceptable to the checkpatch.pl script. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c index 35cd3cbb3bec..d08bab4d3f24 100644 --- a/drivers/staging/comedi/drivers/amplc_dio200.c +++ b/drivers/staging/comedi/drivers/amplc_dio200.c @@ -25,185 +25,185 @@ */ /* -Driver: amplc_dio200 -Description: Amplicon 200 Series Digital I/O -Author: Ian Abbott -Devices: [Amplicon] PC212E (pc212e), PC214E (pc214e), PC215E (pc215e), - PCI215 (pci215 or amplc_dio200), PC218E (pc218e), PC272E (pc272e), - PCI272 (pci272 or amplc_dio200) -Updated: Wed, 22 Oct 2008 13:36:02 +0100 -Status: works - -Configuration options - PC212E, PC214E, PC215E, PC218E, PC272E: - [0] - I/O port base address - [1] - IRQ (optional, but commands won't work without it) - -Configuration options - PCI215, PCI272: - [0] - PCI bus of device (optional) - [1] - PCI slot of device (optional) - If bus/slot is not specified, the first available PCI device will - be used. - -Passing a zero for an option is the same as leaving it unspecified. - -SUBDEVICES - - PC218E PC212E PC215E/PCI215 - ------------- ------------- ------------- - Subdevices 7 6 5 - 0 CTR-X1 PPI-X PPI-X - 1 CTR-X2 CTR-Y1 PPI-Y - 2 CTR-Y1 CTR-Y2 CTR-Z1 - 3 CTR-Y2 CTR-Z1 CTR-Z2 - 4 CTR-Z1 CTR-Z2 INTERRUPT - 5 CTR-Z2 INTERRUPT - 6 INTERRUPT - - PC214E PC272E/PCI272 - ------------- ------------- - Subdevices 4 4 - 0 PPI-X PPI-X - 1 PPI-Y PPI-Y - 2 CTR-Z1* PPI-Z - 3 INTERRUPT* INTERRUPT - -Each PPI is a 8255 chip providing 24 DIO channels. The DIO channels -are configurable as inputs or outputs in four groups: - - Port A - channels 0 to 7 - Port B - channels 8 to 15 - Port CL - channels 16 to 19 - Port CH - channels 20 to 23 - -Only mode 0 of the 8255 chips is supported. - -Each CTR is a 8254 chip providing 3 16-bit counter channels. Each -channel is configured individually with INSN_CONFIG instructions. The -specific type of configuration instruction is specified in data[0]. -Some configuration instructions expect an additional parameter in -data[1]; others return a value in data[1]. The following configuration -instructions are supported: - - INSN_CONFIG_SET_COUNTER_MODE. Sets the counter channel's mode and - BCD/binary setting specified in data[1]. - - INSN_CONFIG_8254_READ_STATUS. Reads the status register value for the - counter channel into data[1]. - - INSN_CONFIG_SET_CLOCK_SRC. Sets the counter channel's clock source as - specified in data[1] (this is a hardware-specific value). Not - supported on PC214E. For the other boards, valid clock sources are - 0 to 7 as follows: - - 0. CLK n, the counter channel's dedicated CLK input from the SK1 - connector. (N.B. for other values, the counter channel's CLKn - pin on the SK1 connector is an output!) - 1. Internal 10 MHz clock. - 2. Internal 1 MHz clock. - 3. Internal 100 kHz clock. - 4. Internal 10 kHz clock. - 5. Internal 1 kHz clock. - 6. OUT n-1, the output of counter channel n-1 (see note 1 below). - 7. Ext Clock, the counter chip's dedicated Ext Clock input from - the SK1 connector. This pin is shared by all three counter - channels on the chip. - - INSN_CONFIG_GET_CLOCK_SRC. Returns the counter channel's current - clock source in data[1]. For internal clock sources, data[2] is set - to the period in ns. - - INSN_CONFIG_SET_GATE_SRC. Sets the counter channel's gate source as - specified in data[2] (this is a hardware-specific value). Not - supported on PC214E. For the other boards, valid gate sources are 0 - to 7 as follows: - - 0. VCC (internal +5V d.c.), i.e. gate permanently enabled. - 1. GND (internal 0V d.c.), i.e. gate permanently disabled. - 2. GAT n, the counter channel's dedicated GAT input from the SK1 - connector. (N.B. for other values, the counter channel's GATn - pin on the SK1 connector is an output!) - 3. /OUT n-2, the inverted output of counter channel n-2 (see note - 2 below). - 4. Reserved. - 5. Reserved. - 6. Reserved. - 7. Reserved. - - INSN_CONFIG_GET_GATE_SRC. Returns the counter channel's current gate - source in data[2]. - -Clock and gate interconnection notes: - - 1. Clock source OUT n-1 is the output of the preceding channel on the - same counter subdevice if n > 0, or the output of channel 2 on the - preceding counter subdevice (see note 3) if n = 0. - - 2. Gate source /OUT n-2 is the inverted output of channel 0 on the - same counter subdevice if n = 2, or the inverted output of channel n+1 - on the preceding counter subdevice (see note 3) if n < 2. - - 3. The counter subdevices are connected in a ring, so the highest - counter subdevice precedes the lowest. - -The 'INTERRUPT' subdevice pretends to be a digital input subdevice. The -digital inputs come from the interrupt status register. The number of -channels matches the number of interrupt sources. The PC214E does not -have an interrupt status register; see notes on 'INTERRUPT SOURCES' -below. - -INTERRUPT SOURCES - - PC218E PC212E PC215E/PCI215 - ------------- ------------- ------------- - Sources 6 6 6 - 0 CTR-X1-OUT PPI-X-C0 PPI-X-C0 - 1 CTR-X2-OUT PPI-X-C3 PPI-X-C3 - 2 CTR-Y1-OUT CTR-Y1-OUT PPI-Y-C0 - 3 CTR-Y2-OUT CTR-Y2-OUT PPI-Y-C3 - 4 CTR-Z1-OUT CTR-Z1-OUT CTR-Z1-OUT - 5 CTR-Z2-OUT CTR-Z2-OUT CTR-Z2-OUT - - PC214E PC272E/PCI272 - ------------- ------------- - Sources 1 6 - 0 JUMPER-J5 PPI-X-C0 - 1 PPI-X-C3 - 2 PPI-Y-C0 - 3 PPI-Y-C3 - 4 PPI-Z-C0 - 5 PPI-Z-C3 - -When an interrupt source is enabled in the interrupt source enable -register, a rising edge on the source signal latches the corresponding -bit to 1 in the interrupt status register. - -When the interrupt status register value as a whole (actually, just the -6 least significant bits) goes from zero to non-zero, the board will -generate an interrupt. For level-triggered hardware interrupts (PCI -card), the interrupt will remain asserted until the interrupt status -register is cleared to zero. For edge-triggered hardware interrupts -(ISA card), no further interrupts will occur until the interrupt status -register is cleared to zero. To clear a bit to zero in the interrupt -status register, the corresponding interrupt source must be disabled -in the interrupt source enable register (there is no separate interrupt -clear register). - -The PC214E does not have an interrupt source enable register or an -interrupt status register; its 'INTERRUPT' subdevice has a single -channel and its interrupt source is selected by the position of jumper -J5. - -COMMANDS - -The driver supports a read streaming acquisition command on the -'INTERRUPT' subdevice. The channel list selects the interrupt sources -to be enabled. All channels will be sampled together (convert_src == -TRIG_NOW). The scan begins a short time after the hardware interrupt -occurs, subject to interrupt latencies (scan_begin_src == TRIG_EXT, -scan_begin_arg == 0). The value read from the interrupt status register -is packed into a short value, one bit per requested channel, in the -order they appear in the channel list. -*/ + * Driver: amplc_dio200 + * Description: Amplicon 200 Series Digital I/O + * Author: Ian Abbott + * Devices: [Amplicon] PC212E (pc212e), PC214E (pc214e), PC215E (pc215e), + * PCI215 (pci215 or amplc_dio200), PC218E (pc218e), PC272E (pc272e), + * PCI272 (pci272 or amplc_dio200) + * Updated: Wed, 22 Oct 2008 13:36:02 +0100 + * Status: works + * + * Configuration options - PC212E, PC214E, PC215E, PC218E, PC272E: + * [0] - I/O port base address + * [1] - IRQ (optional, but commands won't work without it) + * + * Configuration options - PCI215, PCI272: + * [0] - PCI bus of device (optional) + * [1] - PCI slot of device (optional) + * If bus/slot is not specified, the first available PCI device will + * be used. + * + * Passing a zero for an option is the same as leaving it unspecified. + * + * SUBDEVICES + * + * PC218E PC212E PC215E/PCI215 + * ------------- ------------- ------------- + * Subdevices 7 6 5 + * 0 CTR-X1 PPI-X PPI-X + * 1 CTR-X2 CTR-Y1 PPI-Y + * 2 CTR-Y1 CTR-Y2 CTR-Z1 + * 3 CTR-Y2 CTR-Z1 CTR-Z2 + * 4 CTR-Z1 CTR-Z2 INTERRUPT + * 5 CTR-Z2 INTERRUPT + * 6 INTERRUPT + * + * PC214E PC272E/PCI272 + * ------------- ------------- + * Subdevices 4 4 + * 0 PPI-X PPI-X + * 1 PPI-Y PPI-Y + * 2 CTR-Z1* PPI-Z + * 3 INTERRUPT* INTERRUPT + * + * Each PPI is a 8255 chip providing 24 DIO channels. The DIO channels + * are configurable as inputs or outputs in four groups: + * + * Port A - channels 0 to 7 + * Port B - channels 8 to 15 + * Port CL - channels 16 to 19 + * Port CH - channels 20 to 23 + * + * Only mode 0 of the 8255 chips is supported. + * + * Each CTR is a 8254 chip providing 3 16-bit counter channels. Each + * channel is configured individually with INSN_CONFIG instructions. The + * specific type of configuration instruction is specified in data[0]. + * Some configuration instructions expect an additional parameter in + * data[1]; others return a value in data[1]. The following configuration + * instructions are supported: + * + * INSN_CONFIG_SET_COUNTER_MODE. Sets the counter channel's mode and + * BCD/binary setting specified in data[1]. + * + * INSN_CONFIG_8254_READ_STATUS. Reads the status register value for the + * counter channel into data[1]. + * + * INSN_CONFIG_SET_CLOCK_SRC. Sets the counter channel's clock source as + * specified in data[1] (this is a hardware-specific value). Not + * supported on PC214E. For the other boards, valid clock sources are + * 0 to 7 as follows: + * + * 0. CLK n, the counter channel's dedicated CLK input from the SK1 + * connector. (N.B. for other values, the counter channel's CLKn + * pin on the SK1 connector is an output!) + * 1. Internal 10 MHz clock. + * 2. Internal 1 MHz clock. + * 3. Internal 100 kHz clock. + * 4. Internal 10 kHz clock. + * 5. Internal 1 kHz clock. + * 6. OUT n-1, the output of counter channel n-1 (see note 1 below). + * 7. Ext Clock, the counter chip's dedicated Ext Clock input from + * the SK1 connector. This pin is shared by all three counter + * channels on the chip. + * + * INSN_CONFIG_GET_CLOCK_SRC. Returns the counter channel's current + * clock source in data[1]. For internal clock sources, data[2] is set + * to the period in ns. + * + * INSN_CONFIG_SET_GATE_SRC. Sets the counter channel's gate source as + * specified in data[2] (this is a hardware-specific value). Not + * supported on PC214E. For the other boards, valid gate sources are 0 + * to 7 as follows: + * + * 0. VCC (internal +5V d.c.), i.e. gate permanently enabled. + * 1. GND (internal 0V d.c.), i.e. gate permanently disabled. + * 2. GAT n, the counter channel's dedicated GAT input from the SK1 + * connector. (N.B. for other values, the counter channel's GATn + * pin on the SK1 connector is an output!) + * 3. /OUT n-2, the inverted output of counter channel n-2 (see note + * 2 below). + * 4. Reserved. + * 5. Reserved. + * 6. Reserved. + * 7. Reserved. + * + * INSN_CONFIG_GET_GATE_SRC. Returns the counter channel's current gate + * source in data[2]. + * + * Clock and gate interconnection notes: + * + * 1. Clock source OUT n-1 is the output of the preceding channel on the + * same counter subdevice if n > 0, or the output of channel 2 on the + * preceding counter subdevice (see note 3) if n = 0. + * + * 2. Gate source /OUT n-2 is the inverted output of channel 0 on the + * same counter subdevice if n = 2, or the inverted output of channel n+1 + * on the preceding counter subdevice (see note 3) if n < 2. + * + * 3. The counter subdevices are connected in a ring, so the highest + * counter subdevice precedes the lowest. + * + * The 'INTERRUPT' subdevice pretends to be a digital input subdevice. The + * digital inputs come from the interrupt status register. The number of + * channels matches the number of interrupt sources. The PC214E does not + * have an interrupt status register; see notes on 'INTERRUPT SOURCES' + * below. + * + * INTERRUPT SOURCES + * + * PC218E PC212E PC215E/PCI215 + * ------------- ------------- ------------- + * Sources 6 6 6 + * 0 CTR-X1-OUT PPI-X-C0 PPI-X-C0 + * 1 CTR-X2-OUT PPI-X-C3 PPI-X-C3 + * 2 CTR-Y1-OUT CTR-Y1-OUT PPI-Y-C0 + * 3 CTR-Y2-OUT CTR-Y2-OUT PPI-Y-C3 + * 4 CTR-Z1-OUT CTR-Z1-OUT CTR-Z1-OUT + * 5 CTR-Z2-OUT CTR-Z2-OUT CTR-Z2-OUT + * + * PC214E PC272E/PCI272 + * ------------- ------------- + * Sources 1 6 + * 0 JUMPER-J5 PPI-X-C0 + * 1 PPI-X-C3 + * 2 PPI-Y-C0 + * 3 PPI-Y-C3 + * 4 PPI-Z-C0 + * 5 PPI-Z-C3 + * + * When an interrupt source is enabled in the interrupt source enable + * register, a rising edge on the source signal latches the corresponding + * bit to 1 in the interrupt status register. + * + * When the interrupt status register value as a whole (actually, just the + * 6 least significant bits) goes from zero to non-zero, the board will + * generate an interrupt. For level-triggered hardware interrupts (PCI + * card), the interrupt will remain asserted until the interrupt status + * register is cleared to zero. For edge-triggered hardware interrupts + * (ISA card), no further interrupts will occur until the interrupt status + * register is cleared to zero. To clear a bit to zero in the interrupt + * status register, the corresponding interrupt source must be disabled + * in the interrupt source enable register (there is no separate interrupt + * clear register). + * + * The PC214E does not have an interrupt source enable register or an + * interrupt status register; its 'INTERRUPT' subdevice has a single + * channel and its interrupt source is selected by the position of jumper + * J5. + * + * COMMANDS + * + * The driver supports a read streaming acquisition command on the + * 'INTERRUPT' subdevice. The channel list selects the interrupt sources + * to be enabled. All channels will be sampled together (convert_src == + * TRIG_NOW). The scan begins a short time after the hardware interrupt + * occurs, subject to interrupt latencies (scan_begin_src == TRIG_EXT, + * scan_begin_arg == 0). The value read from the interrupt status register + * is packed into a short value, one bit per requested channel, in the + * order they appear in the channel list. + */ #include #include