From: willy tarreau Date: Thu, 16 Jan 2014 07:20:10 +0000 (+0100) Subject: net: mvneta: add missing bit descriptions for interrupt masks and causes X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=40ba35e74fa56866918d2f3bc0528b5b92725d5e;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git net: mvneta: add missing bit descriptions for interrupt masks and causes Marvell has not published the chip's datasheet yet, so it's very hard to find the relevant bits to manipulate to change the IRQ behaviour. Fortunately, these bits are described in the proprietary LSP patch set which is publicly available here : http://www.plugcomputer.org/downloads/mirabox/ So let's put them back in the driver in order to reduce the burden of current and future maintenance. Cc: Thomas Petazzoni Cc: Gregory CLEMENT Tested-by: Arnaud Ebalard Signed-off-by: Willy Tarreau Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 84220c12e727..defda6fb4433 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -101,16 +101,56 @@ #define MVNETA_CPU_RXQ_ACCESS_ALL_MASK 0x000000ff #define MVNETA_CPU_TXQ_ACCESS_ALL_MASK 0x0000ff00 #define MVNETA_RXQ_TIME_COAL_REG(q) (0x2580 + ((q) << 2)) + +/* Exception Interrupt Port/Queue Cause register */ + #define MVNETA_INTR_NEW_CAUSE 0x25a0 -#define MVNETA_RX_INTR_MASK(nr_rxqs) (((1 << nr_rxqs) - 1) << 8) #define MVNETA_INTR_NEW_MASK 0x25a4 + +/* bits 0..7 = TXQ SENT, one bit per queue. + * bits 8..15 = RXQ OCCUP, one bit per queue. + * bits 16..23 = RXQ FREE, one bit per queue. + * bit 29 = OLD_REG_SUM, see old reg ? + * bit 30 = TX_ERR_SUM, one bit for 4 ports + * bit 31 = MISC_SUM, one bit for 4 ports + */ +#define MVNETA_TX_INTR_MASK(nr_txqs) (((1 << nr_txqs) - 1) << 0) +#define MVNETA_TX_INTR_MASK_ALL (0xff << 0) +#define MVNETA_RX_INTR_MASK(nr_rxqs) (((1 << nr_rxqs) - 1) << 8) +#define MVNETA_RX_INTR_MASK_ALL (0xff << 8) + #define MVNETA_INTR_OLD_CAUSE 0x25a8 #define MVNETA_INTR_OLD_MASK 0x25ac + +/* Data Path Port/Queue Cause Register */ #define MVNETA_INTR_MISC_CAUSE 0x25b0 #define MVNETA_INTR_MISC_MASK 0x25b4 + +#define MVNETA_CAUSE_PHY_STATUS_CHANGE BIT(0) +#define MVNETA_CAUSE_LINK_CHANGE BIT(1) +#define MVNETA_CAUSE_PTP BIT(4) + +#define MVNETA_CAUSE_INTERNAL_ADDR_ERR BIT(7) +#define MVNETA_CAUSE_RX_OVERRUN BIT(8) +#define MVNETA_CAUSE_RX_CRC_ERROR BIT(9) +#define MVNETA_CAUSE_RX_LARGE_PKT BIT(10) +#define MVNETA_CAUSE_TX_UNDERUN BIT(11) +#define MVNETA_CAUSE_PRBS_ERR BIT(12) +#define MVNETA_CAUSE_PSC_SYNC_CHANGE BIT(13) +#define MVNETA_CAUSE_SERDES_SYNC_ERR BIT(14) + +#define MVNETA_CAUSE_BMU_ALLOC_ERR_SHIFT 16 +#define MVNETA_CAUSE_BMU_ALLOC_ERR_ALL_MASK (0xF << MVNETA_CAUSE_BMU_ALLOC_ERR_SHIFT) +#define MVNETA_CAUSE_BMU_ALLOC_ERR_MASK(pool) (1 << (MVNETA_CAUSE_BMU_ALLOC_ERR_SHIFT + (pool))) + +#define MVNETA_CAUSE_TXQ_ERROR_SHIFT 24 +#define MVNETA_CAUSE_TXQ_ERROR_ALL_MASK (0xFF << MVNETA_CAUSE_TXQ_ERROR_SHIFT) +#define MVNETA_CAUSE_TXQ_ERROR_MASK(q) (1 << (MVNETA_CAUSE_TXQ_ERROR_SHIFT + (q))) + #define MVNETA_INTR_ENABLE 0x25b8 #define MVNETA_TXQ_INTR_ENABLE_ALL_MASK 0x0000ff00 -#define MVNETA_RXQ_INTR_ENABLE_ALL_MASK 0xff000000 +#define MVNETA_RXQ_INTR_ENABLE_ALL_MASK 0xff000000 // note: neta says it's 0x000000FF + #define MVNETA_RXQ_CMD 0x2680 #define MVNETA_RXQ_DISABLE_SHIFT 8 #define MVNETA_RXQ_ENABLE_MASK 0x000000ff